loading
ITU RADIO REGULATIONS ANX - RADIO REGULATIONS ANNEX 1
ITU-R
A description is not available for this item.
ITU RADIO REGULATIONS - RADIO REGULATIONS 4 VOLUME SET * A4 SIZE
ITU-R
A description is not available for this item.
ITU HANDBOOK ON RADIO - ITU HANDBOOK ON RADIO ASTRONOMY
ITU-R
A description is not available for this item.
ASTM D4069-95(2026)e1 - Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
June 1, 2026 - ASTM International

5.1 Activated carbons used in containment systems for nuclear reactors must be capable of functioning under both normal operating conditions and those conditions which may exist following a design basis accident (DBA). Adsorbent beds that are part of recirculatory systems inside containment may be...

ASTM E3524/E3524M-26 - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Rotate
April 15, 2026 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator control...

ASTM E1419/E1419M-26 - Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
May 1, 2026 - ASTM International

5.1 Because of safety considerations, regulatory agencies (for example, U.S. Department of Transportation) require periodic examinations of vessels used in transportation of industrial gases (see Section 49, Code of Federal Regulations). The AE examination has become accepted as an alternative to...

ASTM D8270-26 - Standard Terminology Relating to Cannabis
May 1, 2026 - ASTM International

1.1 This terminology is a compilation of definitions of technical terms used in the cannabis industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee D37 is responsible it...

ASTM F1768-97(2025) - Standard Guide for Using Whistle Signals During Rope Rescue Operations
December 1, 2025 - ASTM International

3.1 Whistle signals are a simple and effective means of communication between rescuers and those operating a rope-raising or rope-lowering system. They may be used as a primary means of communication or as a backup when radios fail or when ambient noise makes them unintelligible. 3.2 These...

ITU SPACE RADIO CD - SPACE RADIOCOMMUNICATIONS STATIONS ON CD-ROM
ITU-R
A description is not available for this item.
ASTM E3408/E3408M-25a - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Inspect
November 1, 2025 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator control...

ASTM F3427-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
November 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM E2907/E2907M-25 - Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
September 1, 2025 - ASTM International

5.1 Paper machine rolls can range in size from 2.4?m to 9 m [8?ft to 30 ft] long, with a shell thickness of from 12.5?mm to 75 mm [0.5?in. to 3 in.,] and 300?mm to 1200 mm [12?in. to 48 in.] diameter. Depending on purpose, paper machine rolls can weigh as little as 60 000 kg [13 000 lb] to as much...

ASTM E1930/E1930M-25 - Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
September 1, 2025 - ASTM International

5.1 General-This procedure is used for evaluation of the structural integrity of atmospheric storage tanks. The AE method can detect flaws which are in locations that are stressed during pressurization. Such locations include the tank wall, welds attaching pads to the tank, nozzle attachments, and...

ASTM F412-25a - Standard Terminology Relating to Plastic Piping Systems
September 1, 2025 - ASTM International

1.1 This terminology is a compilation of definitions of technical terms used in the plastic piping industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee F17 is...

Advertisement