loading
ASTM D5872/D5872M-18(2025) - Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
July 1, 2025 - ASTM International

4.1 Casing advancement may be used in support of geoenvironmental exploration and for installation of subsurface water-quality monitoring devices in both unconsolidated and consolidated sediment. Casing advancement systems and procedures used for geoenvironmental exploration and instrumentation...

ASTM F1611-20(2024) - Standard Specification for Intramedullary Reamers
October 1, 2024 - ASTM International

This specification provides requirements for material, dimensions and tolerances, finish and marking, and care and handling for reamers intended to cut a cylindrical path along the medullary canal of diaphyseal bone. Intramedullary reamers are commonly used to prepare the medullary...

ASTM C1036-25 - Standard Specification for Flat Glass
February 1, 2025 - ASTM International

This specification covers the quality requirements of flat, transparent, clear, and tinted glass. This glass is intended to be used primarily for architectural glazing products including: coated glass, insulating glass units, laminated glass, mirrors, spandrel glass, or similar uses. The monolithic...

ASTM C1651-25 - Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
January 1, 2025 - ASTM International

1.1 This test method is applicable to the determination of the peak-to-valley depth and peak-to-peak distances of the out-of-plane deformation referred to as roll wave which occurs in flat, heat-treated architectural glass substrates processed in a heat processing continuous or oscillating...

ASTM F2217/F2217M-13(2023) - Standard Practice for Coating/Adhesive Weight Determination
November 15, 2023 - ASTM International

1.1 This practice covers a procedure for determining the amount of coating applied to a substrate, (for example, film, paper, nonwoven). The amount of coating is expressed as a weight per given area, (for example, g/m2, lb/ream). 1.2 The values stated in either SI units or inch-pound units...

AS14238E - BUSHING, SLEEVE FLANGED, PRESS FIT, REAM TYPE
October 6, 2023 - SAE International
A description is not available for this item.
ASTM F3632-23 - Standard Practice for Close Tolerance Pipe Slurrification (CTPS) Method to Replace, Rehabilitate, and Repair Existing Buried Asbestos Cement (AC) Pipe Systems
June 1, 2023 - ASTM International

1.1 This practice covers the requirements and test methods of an EPA-approved alternative work practice (AWP) for the replacing of an Asbestos Cement (AC) pipe by the Close Tolerance Pipe Slurrification Method in accordance with said EPA CTPS AWP issued on June 10, 2019. This process utilizes a...

AS14238D - BUSHING, SLEEVE FLANGED, PRESS FIT, REAM TYPE
January 13, 2023 - SAE International
A description is not available for this item.
ASTM C1036-21 - Standard Specification for Flat Glass
April 1, 2021 - ASTM International

This specification covers the quality requirements of flat, transparent, clear, and tinted glass. This glass is intended to be used primarily for architectural glazing products including: coated glass, insulating glass units, laminated glass, mirrors, spandrel glass, or similar uses. The monolithic...

The Essential Guide to the Business & Law of Esports & Professional Video Gaming
February 24, 2021 - CRC

"As esports has grown, the need for professional legal representation has grown with it. Justin's Essential Guide to the Business & Law of Esports & Professional Video Gaming provides a great baseline and will help prevent the legal horror stories of esports in the past." Mitch Reames,...

Traditional Machining Technology
August 11, 2020 - CRC

Traditional Machining Technology describes the fundamentals, basic elements, and operations of general-purpose metal cutting and abrasive machine tools used for the production and grinding of cylindrical and flat surfaces by turning, drilling, and reaming; shaping and planing; and milling...

ASTM F1611-20 - Standard Specification for Intramedullary Reamers
February 1, 2020 - ASTM International

This specification provides requirements for material, dimensions and tolerances, finish and marking, and care and handling for reamers intended to cut a cylindrical path along the medullary canal of diaphyseal bone. Intramedullary reamers are commonly used to prepare the medullary...

ASTM F1611 - Standard Specification for Intramedullary Reamers
February 1, 2020 - ASTM

This specification provides requirements for material, dimensions and tolerances, finish and marking, and care and handling for reamers intended to cut a cylindrical path along the medullary canal of diaphyseal bone. Intramedullary reamers are commonly used to prepare the medullary...

Live Longer with AI
September 30, 2020 - PACKT

A fascinating journey from before birth to death on how technology can be harnessed to help us live healthier, longer, and better lives Key Features * 20 of the world's top experts on artificial intelligence, genomics and longevity share their insights on bringing health and wealth together to live...

DIN 8089 - Stub reamers
December 1, 2020 - DIN
A description is not available for this item.
DIN 8054 - Shell reamers with carbide tips
December 1, 2020 - DIN
A description is not available for this item.
DIN 212-1 - Machine reamers with parallel shank - Part 1: Continuous shanks
December 1, 2020 - DIN
A description is not available for this item.
DIN 8094 - Machine-reamers with morse taper shank, with carbide tips, with long cutting part
December 1, 2020 - DIN
A description is not available for this item.
ISUZU ISD-C01-003 - Reamer bolts
September 12, 2016 - ISUZU
A description is not available for this item.
ASTM D6001/D6001M-20 - Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
September 1, 2020 - ASTM International

5.1 Direct-push groundwater sampling and profiling are economical methods for obtaining discrete interval groundwater quality samples in many soils and unconsolidated formations without the expense of permanent monitoring well installation (1-10).4 Many of these devices can be used to profile...

Advertisement