loading
ASTM F877-26 - Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
August 1, 2026 - ASTM International

1.1 This specification covers requirements, test methods, and marking requirements for system components when tested with nominal SDR9 crosslinked polyethylene (PEX) tubing as a system. Systems are intended for 100 psi (0.69 MPa) water service up to and including a maximum working temperature of...

ASTM D297-21(2026) - Standard Test Methods for Rubber Products—Chemical Analysis
June 1, 2026 - ASTM International

These test methods cover the qualitative and quantitative analyses of the composition of natural and synthetic crude rubbers. These methods are divided into general and specific test methods. General test methods shall be performed to determine the amount and type of some or all of the major...

ASTM D8655-26 - Standard Classification System for Cell Classification of Pre- and Post-Consumer Recycled Rigid Poly(Vinyl Chloride)(PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Materials
April 15, 2026 - ASTM International

4.1 While end-use product performance and durability remain critical for functionality, the focus on recycling rigid PVC products or components at their end of life needs to be intensified. Participants in the value chain (for example, material scientists, product designers, procurement, and...

ASTM C564-26 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
February 1, 2026 - ASTM International

This specification covers preformed rubber gaskets used to seal joints in cast iron soil pipe and fittings. Gaskets shall be made of a properly vulcanized virgin rubber as the sole elastomer with no scrap or reclaim. Gaskets shall conform to the required physical properties such as hardness,...

ASTM F876-26 - Standard Specification for Crosslinked Polyethylene (PEX) Tubing
February 1, 2026 - ASTM International

1.1 This specification covers crosslinked polyethylene (PEX) tubing that incorporates an optional polymeric inner, middle or outer layer and that is outside diameter controlled, made in nominal SDR9 tubing dimension ratios except where noted, and pressure rated for water at three temperatures (see...

ASTM F1807-26 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
February 1, 2026 - ASTM International

1.1 This specification covers metal insert fittings and copper crimp rings, or alternate stainless steel clamps, for use with cross-linked polyethylene (PEX) tubing in Nominal Tubing Size (NTS) 3/8 , 1/2 , 5/8 , 3/4 , 1, 1 1/4 , 11/2 , and 2 nominal sizes that meet the requirements for...

ASTM F1807-25 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
December 1, 2025 - ASTM International

1.1 This specification covers metal insert fittings and copper crimp rings, or alternate stainless steel clamps, for use with cross-linked polyethylene (PEX) tubing in Nominal Tubing Size (NTS) 3/8 , 1/2 , 5/8 , 3/4 , 1, 1 1/4 , 11/2 , and 2 nominal sizes that meet the requirements for...

ASTM D5396-04(2025) - Standard Specification for Reclaimed Perchloroethylene
August 1, 2025 - ASTM International

This specification establishes the requirements for reclaimed perchloroethylene typically needed in various industries for noncritical applications such as in metal cleaning formulations. This is not recommended for dry cleaning applications, but may be used as a reference document by...

ASTM F876-25 - Standard Specification for Crosslinked Polyethylene (PEX) Tubing
August 1, 2025 - ASTM International

1.1 This specification covers crosslinked polyethylene (PEX) tubing that incorporates an optional polymeric inner, middle or outer layer and that is outside diameter controlled, made in nominal SDR9 tubing dimension ratios except where noted, and pressure rated for water at three temperatures (see...

ASTM F877-25 - Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
August 1, 2025 - ASTM International

1.1 This specification covers requirements, test methods, and marking requirements for system components when tested with nominal SDR9 crosslinked polyethylene (PEX) tubing as a system. Systems are intended for 100 psi (0.69 MPa) water service up to and including a maximum working temperature of...

ASTM D5248-04(2025) - Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
August 1, 2025 - ASTM International

1.1 This specification covers the three grades of 1,1,2-trichloro 1,2,2-trifluoroethane2 typically needed in various industries. It may be used as a reference document by purchasers or by persons establishing in-house, 1,1,2-trichloro 1,2,2-trifluoroethane recovery programs. 1.2 This international...

ASTM F2820-24 - Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
December 1, 2024 - ASTM International

1.1 This specification covers virgin polyetherketoneketone (PEKK) polymer in virgin forms (for example, pellets, granules, powder, filaments used in additive manufacturing) and fabricated forms. It provides requirements and associated test methods for these thermoplastics when they are to be used...

ASTM E2893-25 - Standard Guide for Greener Cleanups
January 1, 2025 - ASTM International

4.1 Purpose-This guide provides a process for identifying, prioritizing, selecting, implementing, documenting, and reporting activities to reduce the environmental footprint of a cleanup as defined by the following core elements. 4.1.1 Minimize Total Energy Use and Maximize Use of Renewable...

ASTM D7662-15(2024) - Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
November 1, 2024 - ASTM International

1.1 This test method covers the instrumental determination of carbon content in samples of carbon black feedstock oils. Values obtained represent the total carbon content. 1.2 This test method is applicable to carbon black feedstock oils derived from petroleum, coal, and other sources which include...

ASTM D7679-16(2024) - Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
November 1, 2024 - ASTM International

1.1 This test method covers the instrumental determination of sulfur content in samples of carbon black feedstock oils. Values obtained represent the total sulfur content. Two analysis methods are available for use: Test Method A: High-Temperature Combustion With Infrared Absorption Detection...

ASTM D7999-15(2024) - Standard Classification for Rubber Products in Natural Gas Pipeline Applications
November 1, 2024 - ASTM International

1.1 This classification system covers the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic robbers, alone or in combination) that are intended for use in rubber products found in natural gas pipeline applications (for example, elastomeric couplings,...

ASTM D2000-18(2024)e1 - Standard Classification System for Rubber Products in Automotive Applications
November 1, 2024 - ASTM International

1.1 This classification system covers the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. Note 1: This classification system...

ASTM F876-24b - Standard Specification for Crosslinked Polyethylene (PEX) Tubing
November 1, 2024 - ASTM International

1.1 This specification covers crosslinked polyethylene (PEX) tubing that incorporates an optional polymeric inner, middle or outer layer and that is outside diameter controlled, made in nominal SDR9 tubing dimension ratios except where noted, and pressure rated for water at three temperatures (see...

ASTM F3087-15(2024) - Standard Specification for Acrylic Molding Resins for Medical Implant Applications
September 15, 2024 - ASTM International

1.1 This specification covers acrylic resins supplied in virgin form (typically pellets, powder, or granules) for medical implant applications. The co-polymers are limited to random co-polymers. This specification provides requirements and associated test methods for this thermoplastic when it is...

ASTM F876-24a - Standard Specification for Crosslinked Polyethylene (PEX) Tubing
September 1, 2024 - ASTM International

1.1 This specification covers crosslinked polyethylene (PEX) tubing that incorporates an optional polymeric inner, middle or outer layer and that is outside diameter controlled, made in nominal SDR9 tubing dimension ratios except where noted, and pressure rated for water at three temperatures (see...

Advertisement