loading
QUALITY RELIABILITY - QUALITY, RELIABILITY & PROCESS IMPROVEMENT
IP
A description is not available for this item.
HANDBOOK OF RELIABILITY - HANDBOOK OF RELIABILITY ENGINEERING AND MANAGEMENT
ASQ
A description is not available for this item.
ASTM D8471-22a(2026) - Standard Practice for Silica—Reference Compound
July 1, 2026 - ASTM International

5.1 This practice may be used to characterize silica or silane in terms of specific properties of the standard compound. This practice is useful for the quality assurance of silica production. It may also be used for the preparation of reference compounds for compounding experiments, to confirm the...

ASTM E800-26 - Standard Guide for Measurement of Gases Present or Generated During Fires
June 1, 2026 - ASTM International

4.1 Because of the loss of life in fires from inhalation of fire gases, much attention has been focused on the analyses of these species. Analysis has involved several new or modified methods, since common analytical techniques have often proven to be inappropriate for the combinations of various...

ASTM F2446-04(2026) - Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
April 1, 2026 - ASTM International

1.1 This classification is to serve as an international standard for marine equipment nomenclature, taxonomy, hierarchical data structure, unique identifiers, and boundary definition for the consistent acquisition and exchange of equipment RAM performance data. The standard addresses the...

ASTM D3426-19(2026) - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
June 1, 2026 - ASTM International

5.1 It is possible for insulating materials used in high-voltage equipment to be subjected to transient voltage stresses, resulting from such causes as nearby lightning strokes. This is particularly true of apparatus such as transformers and switchgear used in electrical-power transmission and...

ASTM D8646-26 - Standard Test Method for Calculating and Reporting the Estimated Biodegradation Time of Non-Persistent Plastics Designed for Use in Aquatic Environments
May 15, 2026 - ASTM International

1.1 This test method applies to non-floating biodegradable plastics intended for use in aerobic aquatic environments, specifically in marine, brackish, or fresh water ecosystems. The plastics covered under this test method are designed to not persist in the environment by converting into carbon...

ASTM E749/E749M-26 - Standard Practice for Acoustic Emission Monitoring During Continuous Welding
May 1, 2026 - ASTM International

1.1 This practice provides recommendations for acoustic emission (AE) monitoring of weldments during and immediately following their fabrication by continuous welding processes. 1.2 The procedure described in this practice is applicable to the detection and location of AE sources in weldments and...

ASTM E3524/E3524M-26 - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Rotate
April 15, 2026 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator control...

ASTM E3162-26 - Standard Practice Measuring the Durability of Antibacterial Agents Applied to Textiles under Simulated Home Laundering Conditions
April 1, 2026 - ASTM International

5.1 The durability of antimicrobial agents applied to textiles is an important attribute for many of the available technologies on the market. Antimicrobial agents that claim durability are typically fixed ionically, covalently or physically, or both, to a textile surface and are expected to retain...

ASTM E3536/E3536M-26 - Standard Specification for Compacted Mineral-Insulated, Niobium-Sheathed, High Temperature Irradiation Resistant Thermocouples
April 1, 2026 - ASTM International

1.1 This specification covers dimensional and material requirements for compacted, mineral-insulated, niobium-sheathed, high temperature, irradiation resistant thermocouples (HTIR-TC) with one HTIR-TC thermoelement pair. These types of thermocouples are suitable for high neutron fluence, up to 1022...

ASTM D7034-26 - Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
April 1, 2026 - ASTM International

1.1 This guide provides methodology to assist in interpreting results of air quality measurements conducted in aircraft cabins. In particular, the guide describes methodology for assessing the impacts of concentrations for airborne chemical contaminants, based on health and comfort considerations,...

ASTM E3517/E3517M-26 - Standard Practice for Flaw Sizing using Total Focusing Method
February 1, 2026 - ASTM International

5.1 Flaws that are made during manufacturing or that occur during service of a component have the potential to cause the component to fail. NDT methods such as described in Practice E2700 are intended to locate flaws that have the potential to result in component failure. Since not all flaws will...

ASTM E1817-26 - Standard Practice for Controlling Quality of Radiographic Examination by Using Representative Quality Indicators (RQIs)
February 1, 2026 - ASTM International

5.1 The use of RQIs is a significant departure from normal practice in industrial radiography because it is not a standard design and is dependent on the application, material, and process and therefore cannot be a simple plaque or wire. The use of an RQI provides documented evidence that...

ASTM E2677-26 - Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
March 1, 2026 - ASTM International

1.1 In harmony with the Joint Committee for Guides in Metrology (JCGM) and detection concepts of the International Union of Pure and Applied Chemistry (IUPAC) (1, 2), this test method uses a series of replicated measurements of an analyte at dosage levels giving instrumental responses that bracket...

ASTM E2943-26 - Standard Guide for Acceptance and Preference Testing with Consumers
February 1, 2026 - ASTM International

1.1 This guide covers acceptance and preference measures when each is used in an unbranded, two-sample or multi-sample product test. Each measure, acceptance and preference may be used alone or together in a single test or separated by time. This guide covers how to establish a product's hedonic or...

ASTM E2458-26 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
January 15, 2026 - ASTM International

4.1 These practices should be used only to collect visible samples that are suspected biological agents and toxins and have been field screened as defined by the FBI-DHS-HHS/CDC Coordinated Document for explosive hazard, radiological hazard, and other acute chemical hazards. 4.2 These practices...

ASTM C1880-26 - Standard Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets
January 1, 2026 - ASTM International

5.1 Facility operators and safeguards inspectors routinely take UF6 samples from processing lines, isotopic enrichment cascades or storage cylinders to determine its uranium isotopic composition, most important the n(235U)/n(238U) isotope ratio, needed to calculate the amount of the fissile 235U in...

ASTM F1360-25a - Standard Specification for Ovens, Microwave, Electric
December 1, 2025 - ASTM International

This specification covers commercial microwave ovens. These ovens use ultrahigh frequency electromagnetic radiation in the approved industrial, scientific, and medical bands to defrost, heat, and cook food. The microwave ovens are classified by types, sizes, groups, styles, and classes. In terms of...

Advertisement