loading
PCMCIA CARDWARE SDK - CARDWARE SDK
PCMCIA
A description is not available for this item.
PCMCIA CARDBUS SYSTEM - PCMCIA CARDBUS SYSTEM ARCHITECTURE
PCMCIA
A description is not available for this item.
PCMCIA AWARD PC CARD - PCMCIA AWARD PC CARD SOFTWARE DEVELOPER'S KIT
PCMCIA
A description is not available for this item.
PCMCIA PC CARD RESOURCE - PCMCIA PC CARD STANDARD RELEASE 7.0
PCMCIA
A description is not available for this item.
PCMCIA PC CARD STANDARD - PC CARD STANDARD/SOCKET SERVICES INTERFACE SPECIFICATION
PCMCIA
A description is not available for this item.
IEEE 802 NENDICA REPORT - Nendica Report: Flexible Factory IoT—Use Cases and Communication Requirements for Wired and Wireless Bridged Networks
January 1, 2020 - IEEE

The scope of this report includes use cases and communication requirements for Flexible Factory networks. Dense use of wireless devices with differentiated quality of service (QoS) requirements and operation in a Flexible Factory environment are taken into consideration. Gap analysis from...

AGA REPORT #9 - Measurement of Gas by Multipath Ultrasonic Meters
July 1, 2017 - AGA

This report is for multipath ultrasonic transit-time flow meters used for the measurement of natural gas. It may be used for the measurement of other gases in consultation with the meter manufacturer and a competent professional. Multipath ultrasonic meters have at least two independent...

AGA REPORT #8 P2 - Thermodynamic Properties of Natural Gas and Related Gases GERG–2008 Equation of State
April 1, 2017 - AGA

Part 2 presents information for computation of thermodynamic properties, including compressibility factors, densities, and speeds of sound, of natural gas and related gases, for gaseous states, vapor-liquid equilibrium states, and liquid states, based on the GERG-2008 equation of state [1,2]. It...

AGA REPORT #8 P1 - Thermodynamic Properties of Natural Gas and Related Gases DETAIL and GROSS Equations of State
April 1, 2017 - AGA

Part 1 presents information for the computation of thermodynamic properties (e.g., compressibility factor, density, and speed of sound) of natural gas and related gases with the DETAIL and GROSS equations of state. Uncertainty estimations for different compositions, pressures, and temperatures are...

ASTM D4120-07(2024) - Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
November 1, 2024 - ASTM International

5.1 This test method for the determination of cohesion in sliver, roving, or top in dynamic tests may be used for the acceptance testing of commercial shipments but caution is advised since information on between-laboratory precision is lacking. Comparative tests as directed in 5.1.1 may be...

ASTM D2612-99(2024) - Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests)
November 1, 2024 - ASTM International

5.1 Fiber cohesion is related to the resistance to drafting encountered during textile processing and is affected by such fiber properties as surface lubrication, linear density, surface configuration, fiber length, and crimp. 5.2 Fiber cohesion is affected by the alignment of fiber in sliver in...

AGA REPORT #3 P3 - Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids - Concentric, Square-edged Orifice Meters Part 3: Natural Gas Applications
November 1, 2013 - AGA

General This part of API MPMS Ch. 14.3/AGA Report No. 3 has been developed as an application guide for the calculation of natural gas flow through a flange-tapped, concentric orifice meter, using the U.S. customary (USC) inch-pound system of units. For applications involving international...

AGA REPORT #11 - Measurement of Natural Gas by Coriolis Meter
February 1, 2013 - AGA

This report was developed for the specification, calibration, installation, operation, maintenance and verification of Coriolis flow meters and is limited to the measurement of single phase natural gas, consisting primarily of hydrocarbon gases mixed with other associated gases usually known...

ASTM D3937-12(2024) - Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
July 1, 2024 - ASTM International

5.1 This test method for the determination of crimp frequency of manufactured staple fibers may be used for the acceptance testing of commercial shipments but caution is advised since between-laboratory precision is known to be poor. Comparative tests conducted as directed in 5.1.1 may be advisable...

ASTM D3513-02(2024) - Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
July 1, 2024 - ASTM International

5.1 The existence of overlength fiber in manufactured staple can cause serious problems in the spinning of these fibers into yarn. Overlength fibers may create problems in carding, but more especially high-strength multiple cut fibers may cause cockling in spinning. 5.2 Since the overlength...

ITU-R REPORT S.2223 - Technical and operational requirements for GSO FSS earth stations on mobile platforms in bands from 17.3 to 30.0 GHz
October 1, 2011 - ITU-R

Introduction GSO fixed-satellite service networks are being used at an increasing rate to provide services to earth stations mounted on mobile platforms. GSO FSS networks are currently providing valuable broadband telecommunications services to aircraft, ships, trains and other vehicles in the 14...

ITU-R REPORT SM.2125 - Parameters of and measurement procedures on H/V/UHF monitoring receivers and stations
June 1, 2011 - ITU-R

Introduction The ITU Handbook on Spectrum Monitoring (Edition 2011) contains typical specifications of monitoring receivers and direction-finder (DF)/monitoring stations but does not specify the measurement procedures to determine these specifications. The Handbook also does not take into account...

Advertisement