This European standard specifies the determination of resistance to racking of an open casement or sash expressed as loads and the resulting maximum and residual deformations. This European Standard applies to the opening modes specified in Figure A.1 to Figure A.6 and included in prEN 12519.
This standard specifies a method for determination of the resistance of glass containers to external force in the direction of the vertical axis.
This Part 1-2 of EN 50289 details the test methods to determine the DC resistance characteristics of the conductors of cables used in analogue and digital communication systems. These characteristics are described by the conductor resistance, loop resistance and...
This European standard specifies the determination of resistance to static torsion of an open casement, expressed as loads and the resulting maximum and residual deformations. This standard applies to the opening modes specified in Figure A.1 to Figure A.5 and included in EN 12519. This test...
5.1 The AE produced during the production of a spot-weld can be related to weld quality parameters such as the strength and size of the nugget, the amount of expulsion, and the amount of cracking. Therefore, in-process AE monitoring can be used both as an examination method, and as a...
This part of IEC 61196 applies to coaxial communication cables. It specifies the test methods to determine solderability and the resistance to soldering of inner and outer conductors of cables used in analogue and digital communication systems. Resistance to soldering details the test...
This part of IEC 61196 applies to coaxial communication cables. It specifies the test methods to determine solderability and the resistance to soldering of inner and outer conductors of cables used in analogue and digital communication systems. Resistance to soldering details the test...
This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD). Parameters required for the derivation of reference resistance are presented. These parameters...
1.1 This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD). The reference resistance derived from this specification applies to the design of structures...
This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD). Parameters required for the derivation of reference resistance are presented. These parameters...
This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD). Parameters required for the derivation of reference resistance are presented. These parameters...
This European Standard specifies the procedure for determination of the shear load resistance of thermally sprayed coatings, provided that a minimum thickness is given. Additionally this European Standard defines the shear load resistance and the designation of the fracture"s...
1.1 This practice describes procedures for the measurement, processing, and interpretation of the acoustic emission (AE) response associated with selected stages of the resistance spot-welding process. 1.2 This practice also provides guidelines for feedback control by utilizing the...
1.1 This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD). The reference resistance derived from this specification applies to the design of structures...
This part of IEC 61196 details the method of test to determine the impact resistance of coaxial communication cables.
This specification covers procedures for computing the reference resistance of wood-based materials and structural connections for use in load and resistance factor design (LRFD). The format conversion procedure is outlined in Section 4. The test-based derivation procedure is outlined...