loading
ASTM D3874-26 - Standard Test Method for Ignition of Materials by Hot Wire Sources
June 1, 2026 - ASTM International

5.1 During operation of electrical equipment, including wires, resistors, and other conductors, it is possible for overheating to occur, under certain conditions of operation or when malfunctions occur. When this happens, a possible result is ignition of the insulation material. 5.2 This...

ASTM B63-07(2026) - Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
February 1, 2026 - ASTM International

4.1 In the case of materials for resistors and heating elements, a knowledge of resistivity is important in determining whether wire or strip of a specified area of cross section and length will have a required resistance. It serves as one basis for the selection of materials for specific...

ASTM B114-07(2025) - Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
July 1, 2025 - ASTM International

1.1 This test method covers the determination of the change of resistance with temperature of sheet materials used for shunts and precision resistors for electrical apparatus. It is applicable to materials normally used in the temperature range of from 0?°C to 80?°C. 1.2 The values stated in...

ASTM B84-07(2025) - Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
July 1, 2025 - ASTM International

1.1 This test method covers determination of the change of resistance with temperature of alloy wires used for resistance standards and precision resistors for electrical apparatus. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included...

ASTM B267-07(2023) - Standard Specification for Wire for Use In Wire-Wound Resistors
November 1, 2023 - ASTM International

This specification covers round wires and ribbons with controlled electrical properties made from magnetic and nonmagnetic class 1a-11 alloys. The wires and ribbons, which may have insulated coverings or enamel coatings, are recommended for use in wire-wound resistance units like precision...

ASTM G106-89(2023) - Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
June 1, 2023 - ASTM International

5.1 The availability of a standard procedure, standard material, and standard plots should allow the investigator to check his laboratory technique. This practice should lead to electrochemical impedance curves in the literature which can be compared easily and with confidence. 5.2 Samples of a...

ASTM D6194-23 - Standard Test Method for Glow-Wire Ignition of Materials
February 1, 2023 - ASTM International

5.1 During operation of electrical equipment, including wires, resistors, and other conductors, it is possible for overheating to occur under certain conditions of operation, or when malfunctions occur. When this happens, a possible result is ignition of the adjacent insulation material. 5.2...

DSCC-DWG-20011 - RESISTOR, THERMOCOUPLE LEAD SPOOL
November 16, 2020 - DOD

Scope. This drawing describes the requirements for a thermocouple lead spool resistor and replaces MIL-DTL-7790.

A-A-55088 - RESISTOR, FLAMEPROOF, FUSIBLE
May 22, 2020 - NPFC

This (CID) covers the general requirements for flameproof, fusible resistors. These resistors act as a wire-wound resistor and a fuse, and are used in applications where precise control of fusing point and time lags are necessary. These resistors eliminate fire hazard...

QPL-39023 - Resistor, Variable, Nonwirewound, Precision, General Specification for
March 23, 2021 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-39023 Resistor, Variable, Nonwirewound, Precision, General Specification for This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification...

MIL-PRF-12934/30 - RESISTOR, VARIABLE, WIREWOUND, PRECISION, STYLE RR3900
November 20, 2020 - NPFC

Scope. This specification covers the requirements for style RR3900, precision, wirewound, variable resistors.

QPL-32192 - Resistor, Chip, Thermal (Thermistor), General Specification for
March 3, 2021 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-32192 Resistor, Chip, Thermal (Thermistor), General Specification for This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such...

A-A-59715 - RESISTOR, FIXED AND ADJUSTABLE, WIREWOUND, POWER TYPE, GENERAL REQIUIREMENTS FOR
November 19, 2020 - NPFC

This commercial item description (CID) covers the general requirements for wirewound, power type, fixed or adjustable resistors. Requirements for specific resistors are covered in the individual CID sheets. Resistors covered by this CID are intended for commercial/industrial...

QPL-27208 - Resistor, Variable, Wirewound, Nonprecision General Specification for
January 7, 2021 - NPFC

QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-27208 Resistor, Variable, Wirewound, Nonprecision General Specification for This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification...

MIL-PRF-39023/2 - RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, STYLE RQ110
September 11, 2020 - NPFC

Scope. This specification covers the requirements for style RQ110, variable, nonwirewound, precision resistors.

MIL-PRF-39023/7 - RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, STYLE RQ160
September 11, 2020 - NPFC

Scope. This specification covers the requirements for style RQ160, variable, nonwirewound, precision resistors.

MIL-PRF-39023/6 - RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, STYLE RQ100
September 11, 2020 - NPFC

Scope. This specification covers the requirements for style RQ100, variable, nonwirewound, precision resistors.

MIL-PRF-39023/8 - RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, STYLE RQ210
September 11, 2020 - NPFC

Scope. This specification covers the requirements for style RQ210, variable, nonwirewound, precision resistors.

MIL-PRF-39023/10 - RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, STYLE RQ051
September 11, 2020 - NPFC

Scope. This specification covers the requirements for style RQ051, variable, nonwirewound, precision resistors.

MIL-PRF-39023/3 - RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, STYLE RQ150
September 11, 2020 - NPFC

Scope. This specification covers the requirements for style RQ150, variable, nonwirewound, precision resistors.

Advertisement