loading
ASTM D8668-26 - Standard Test Method for Determining the Peak Stress Energy and Shear Fatigue Resistance of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Monotonic Shear Strength (MOSS) Test
May 1, 2026 - ASTM International

1.1 This test method covers the determination of asphalt binder peak stress (tf), peak stress energy (Ef), and peak strain (?f) using the monotonic shear strength (MOSS) test. tf, Ef, and ?f can be used to measure the strength, toughness, and strain tolerance of an asphalt binder under constant...

ASTM D6204-26 - Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
June 1, 2026 - ASTM International

1.1 This test method covers the use of a rotorless oscillating shear rheometer for the measurement of the flow properties of raw rubber and unvulcanized rubber compounds. These flow properties are related to factory processing. 1.2 The values stated in SI units are to be regarded as standard...

ASTM D8059-26 - Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
June 1, 2026 - ASTM International

1.1 This test method covers the use of a sealed cavity rotorless oscillating shear rheometer for the measurement of the softening effects of rising sinusoidal strain when applied to an unvulcanized rubber compound containing significant amounts of colloidal fillers (such as silica or carbon...

ASTM D8667-26 - Standard Test Method for Determining Intermediate and Low-Temperature Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer (DSR)
May 1, 2026 - ASTM International

5.1 This test method provides a means of using rheological measurements for characterizing the hardness and relaxation properties of an asphalt binder in the high-stiffness region.

ASTM D8362-21(2026) - Standard Test Method for Rubber—Determination of the Degree of Silanization by Dynamic Strain Softening
April 1, 2026 - ASTM International

5.1 This test method is based on the Payne Effect. It is a reasonable approach to evaluate the compound's filler-network formation to quantify the degree of silanization in a silica-filled rubber using a rotorless oscillating shear rheometer for the measurement of the strain softening. 5.2...

ASTM D6648-25a - Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
December 1, 2025 - ASTM International

1.1 This test method2 covers the determination of the flexural creep stiffness or compliance and m-value of asphalt binders by means of a bending beam rheometer. It is applicable to material having stiffness values in the range of 20 MPa to 1 GPa and can be used with unaged material or with...

ASTM D5165-12(2026) - Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
March 1, 2026 - ASTM International

1.1 This practice covers a laboratory procedure for the gelation of a resin solution, ink varnish, or vehicle using a resin kettle. 1.2 Guidance in preparing gelled vehicle samples suitable for use in laboratory sample quantity oil-based printing inks is provided. 1.3 The procedure outlined is not...

ASTM D5422-25 - Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
July 1, 2025 - ASTM International

1.1 This test method covers the use of a screw-extrusion-type capillary rheometer for the measurement of flow properties of thermoplastics and thermoplastic compounds. The measured flow properties, which are obtained through laboratory investigation, help to describe the material behavior...

ASTM D2538-25 - Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
July 1, 2025 - ASTM International

5.1 When PVC compounds are mixed under appropriate conditions of heat and shear, a fused mass is produced. This mass has certain melt characteristics which can be defined with a torque rheometer operated under fixed conditions of shear and temperature. The fusion characteristics of a PVC...

ASTM D7175-25 - Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
November 1, 2025 - ASTM International

5.1 The complex shear modulus is an indicator of the stiffness or resistance of asphalt binder to deformation under load. The phase angle is a measure of the relative portion of the response to an applied load that is elastic (recoverable) or viscous (nonrecoverable). 5.2 The test procedure is...

ASTM C1749-25 - Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementitious Paste Using a Rotational Rheometer
June 1, 2025 - ASTM International

4.1 Rheological properties determined using this guide include plastic viscosity and yield stress as defined by the Bingham model and apparent viscosity. 4.2 Rheological properties provide information about the workability of hydraulic cementitious paste. As an example, the yield stress and plastic...

ASTM D8491-25 - Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
June 1, 2025 - ASTM International

1.1 This test method provides a measure of rheological non-linearity of a rubber compound filled with rCB to assess its reinforcement capabilities. This test method requires the use of a sealed cavity rotorless oscillating shear rheometer for the measurement of the torque with increasing...

ASTM D6648-25 - Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
February 1, 2025 - ASTM International

1.1 This test method2 covers the determination of the creep stiffness or compliance and m-value of asphalt binders by means of a bending beam rheometer. It is applicable to material having stiffness values in the range of 20 MPa to 1 GPa and can be used with unaged material or with materials...

ASTM D7836-13(2025) - Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
May 1, 2025 - ASTM International

1.1 These test methods cover three approaches for determining yield stress values of paints, inks and related liquid materials using rotational viscometers. The first method uses a rotational viscometer with coaxial cylinder, cone/plate, or plate/plate geometry. The second method uses a...

ASTM D8572-25 - Standard Practice for Determining the Impact of an Asphalt Additive on Unaged Asphalt Binder Rheology Using Dynamic Shear Rheometer
May 1, 2025 - ASTM International

5.1 Percent change between a pre-blended asphalt binder and a post-blended asphalt binder outside a pre-determined range showing dissimilar binder rheological properties as defined by this practice may have an impact on asphalt mixture field performance. 5.2 A percent change between a pre-blended...

ASTM D6601-19(2024) - Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
November 1, 2024 - ASTM International

1.1 This test method covers the use of a rotorless oscillating shear rheometer for measuring after cure dynamic properties at predetermined temperature(s) below the cure temperature. 1.2 Specified cure conditions that approximate a "static cure" also are covered to minimize effects on cured...

ASTM D8189-19(2024) - Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)
November 1, 2024 - ASTM International

1.1 This test method covers the determination of pull-off force and pull-off work of asphalt binders and emulsified asphalt residue by means of pull-off testing. The tackiness test is conducted using the dynamic shear rheometer (DSR) at one or more temperatures. Note 1: This standard may be...

ASTM D3835-24 - Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
August 1, 2024 - ASTM International

1.1 This test method covers measurement of the rheological properties of polymeric materials at various temperatures and shear rates common to processing equipment. It covers measurement of melt viscosity, sensitivity, or stability of melt viscosity with respect to temperature and polymer dwell...

ASTM C1749-24 - Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
December 1, 2024 - ASTM International

4.1 Rheological properties determined using this guide include plastic viscosity and yield stress as defined by the Bingham model and apparent viscosity. 4.2 Rheological properties provide information about the workability of hydraulic cementitious paste. As an example, the yield stress and plastic...

ASTM D7405-24 - Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
October 1, 2024 - ASTM International

1.1 This test method covers the determination of percent recovery and non-recoverable creep compliance of asphalt binders by means of multiple stress creep and recovery (MSCR) testing. The MSCR test is conducted using the dynamic shear rheometer (DSR) at a specified temperature. 1.2 This...

Advertisement