loading
DNVGL-CP-0509 - Rigid couplings with special friction treatment
December 1, 2019 - DNVGL

This CP gives a description of the procedures and requirements related to documentation, design and type testing applicable for rigid couplings with friction increasing treatment. The CP describes the applicable design requirements and how to document compliance with the requirements...

AS1730E - Coupling, Fuel, Rigid, Threaded Type
July 12, 2018 - SAE International

This specification defines the requirements for a threaded rigid coupling assembly, which utilizes ferrule type machined tube end fittings, to join tubing and components in aircraft fuel, vent, and other systems. This coupling assembly is designed for use from −65 to 200 °F and...

NAS652 - COUPLING, RIGID TUBE BULKHEAD CONNECTOR
July 31, 2019 - AIA/NAS
A description is not available for this item.
NAS591 - COUPLING, RIGID TUBE CONNECTOR, ALUMINUM
January 31, 2017 - AIA/NAS
A description is not available for this item.
NAS594 - COUPLING, RIGID TUBE CONNECTOR, CRES
April 29, 2016 - AIA/NAS
A description is not available for this item.
ASTM F1476-07(2024) - Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
November 15, 2024 - ASTM International

1.1 This specification provides the performance characteristics and qualification tests required for gasketed mechanical couplings including grooved-type mechanical couplings for grooved end pipe, mechanical restraint couplings for plain end pipe, and mechanical compression...

WW-C-571 - CONDUIT, METAL, RIGID, COUPLING, ELBOW, AND NIPPLE, ELECTRICAL CONDUIT, ENAMELED
December 21, 1979 - NPFC
A description is not available for this item.
AS1730D - Coupling, Fuel, Rigid, Threaded Type
July 12, 2011 - SAE International

This specification defines the requirements for a threaded rigid coupling assembly, which utilizes ferrule type machined tube end fittings, to join tubing and components in aircraft fuel, vent, and other systems. This coupling assembly is designed for use from −65 to 200 °F and...

ASTM E3213-19(2024) - Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
December 15, 2024 - ASTM International

5.1 PCRT Applications and Capabilities-PCRT PTI examination has been applied successfully to a wide range of parts in manufacturing and maintenance environments. Examples of manufacturing processes, repair processes, and in-service damage mechanisms evaluated with PTI are discussed in 1.1. PCRT has...

ASTM D4003-98(2024) - Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
October 1, 2024 - ASTM International

1.1 These test methods are intended to determine the ability of a package or product to withstand laboratory simulated horizontal impact forces. 1.2 The horizontal impacts used in these test methods are programmed shock inputs that represent the hazards as they occur in the shipping and handling...

AS1730C - Coupling, Fuel, Rigid, Threaded Type
August 19, 2009 - SAE International

This specification defines the requirements for a threaded rigid coupling assembly, which utilizes ferrule type machined tube end fittings, to join tubing and components in aircraft fuel, vent, and other systems. This coupling assembly is designed for use from -65 to 200 °F and...

AS1730B - Coupling, Fuel, Rigid, Threaded Type
September 24, 2008 - SAE International

This specification defines the requirements for a threaded rigid coupling assembly, which utilizes ferrule type machined tube end fittings, to join tubing and components in aircraft fuel, vent, and other systems. This coupling assembly is designed for use from -65 to 200 °F and...

AS1730A - Coupling, Fuel, Rigid, Threaded Type
August 14, 2007 - SAE International

This specification defines the requirements for a threaded rigid coupling assembly, which utilizes ferrule type machined tube end fittings, to join tubing and components in aircraft fuel, vent, and other systems. This coupling assembly is designed for use from -65 to 200 °F and...

AS1733F - BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
December 16, 2019 - SAE International
A description is not available for this item.
AS1732F - BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE I
December 16, 2019 - SAE International
A description is not available for this item.
UL 6 - Electrical Rigid Metal Conduit - Steel
November 28, 2022 - ULSE

1.1 These requirements cover electrical rigid metal conduit - steel (ERMC-S), elbows, couplings, and nipples for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1, Canadian Electrical Code, Part I, NOM-001-SEDE, Standard for Electrical...

AS1730 - COUPLING, FUEL, RIGID, THREADED TYPE
September 1, 1982 - SAE International

This specification defines the requirements for a threaded rigid coupling assembly, which utilizes ferrule type machined tube end fittings, to join tubing and components in aircraft fuel, vent and other systems. This coupling assembly is designed for use from -65 to 200 deg. F...

AS1737C - FERRULE, COUPLING, RIGID, FIXED CAVITY THREADED, FERRULE TYPE TUBE ENDS
January 19, 2015 - SAE International
A description is not available for this item.
JIS B 1451 - Rigid Flanged Shaft Couplings
December 1, 1991 - JSA
A description is not available for this item.
AS1736D - WASHER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS
January 3, 2014 - SAE International
A description is not available for this item.
Advertisement