loading
SMACNA GUD ROOF AIR-CON - Guidelines for Roof Mounted Outdoor Air-Conditioner Installations
January 1, 1997 - SMACNA
A description is not available for this item.
ASTM F432-19(2026) - Standard Specification for Roof and Rock Bolts and Accessories
May 1, 2026 - ASTM International

This specification covers the chemical, mechanical, and dimensional requirements for roof and rock bolts and accessories. Addressed in this specification are double-end threaded and slotted steel bars; fully grouted bolts and threaded bars; mechanical anchorage devices used for point...

ASTM D6383/D6383M-99(2026) - Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
May 1, 2026 - ASTM International

1.1 This practice covers sample preparation temperatures, test parameters, and specimen exposure conditions that are applicable when Test Method D5405/D5405M is used for conducting time-to-failure (creep-rupture) tests of adhesive joints fabricated from ethylene-propylene-diene terpolymer (EPDM)...

ASTM D5405/D5405M-98(2026) - Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
May 1, 2026 - ASTM International

1.1 This test method covers laboratory determination of the time-to-failure (creep-rupture) of joints fabricated from nonbituminous organic roof membrane material. The test method covers both T-peel and lap-shear joints subjected to constant tensile load under controlled environmental...

ASTM D7897-26 - Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
July 1, 2026 - ASTM International

1.1 Practice D7897 applies to simulation of the effects of field exposure on the solar reflectance and thermal emittance of roof surface materials including but not limited to field-applied coatings, factory-applied coatings, single-ply membranes, modified bitumen products, shingles, tiles,...

ASTM D6164/D6164M-26 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
July 1, 2026 - ASTM International

1.1 This specification covers prefabricated modified bituminous sheet materials reinforced with polyester fabric as the primary reinforcement, with or without granules, which use styrene butadiene styrene (SBS) thermoplastic elastomer as the primary modifier and are intended for use in the...

ASTM C1782/C1782M-26 - Standard Specification for Segmental Concrete Paving Slabs
June 1, 2026 - ASTM International

This specification covers segmental concrete paving slabs manufactured for construction of pedestrian and roof applications for commercial and municipal projects where close dimensional tolerances for thickness, and/or length and width are not required. These slabs can be manufactured with a...

ASTM E2128-26 - Standard Guide for Evaluating Water Leakage of Building Walls
July 1, 2026 - ASTM International

4.1 This guide is intended to provide building professionals with a comprehensive methodology for evaluating water leakage through walls. It addresses the performance expectations and service history of a wall, the various components of a wall, and the interaction between these components and...

ASTM D4586/D4586M-25 - Standard Specification for Asphalt Roof Cement
December 1, 2025 - ASTM International

This specification covers the testing and requirements for two types and two classes of asbestos-free asphalt roof cement consisting of an asphalt base, volatile petroleum solvents, and mineral and/or other stabilizers, mixed to a smooth, uniform consistency suitable for trowel application...

ASTM E2032-26 - Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119
June 1, 2026 - ASTM International

1.1 This practice covers the extension of fire resistance ratings obtained from fire tests performed in accordance with Test Method E119 to constructions that have not been tested. Test Method E119 evaluates the duration for which test specimens will contain a fire, retain their standard integrity,...

ASTM C1262/C1262M-26 - Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
June 1, 2026 - ASTM International

1.1 This test method covers the resistance to freezing and thawing of dry-cast segmental retaining wall (SRW) units (see Specification C1372) and related concrete units. Units are tested in a test solution that is either potable tap water or 3 % saline solution depending on the intended use of the...

ASTM E196-06(2026) - Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
April 1, 2026 - ASTM International

1.1 This practice covers static load testing of floors and low slope roofs (roofs having a slope of less than 1 in 12) under actual or simulated service conditions, and is applicable to typical elements or sections of structures fabricated for test or to actual existing building...

ASTM E814-26 - Standard Test Method for Fire Tests of Penetration Firestop Systems
June 1, 2026 - ASTM International

1.1 This test method is applicable to firestop systems of various materials and construction. Firestop systems are intended for use in openings in fire-resistive walls and floors that are evaluated in accordance with Test Methods E119. 1.2 Tests conducted in conformance with this test method record...

ASTM D8508/D8508M-25 - Standard Guide for Evaluating the Surface of Structural Concrete Roof Decks to Receive Adhered Roofing Systems
December 15, 2025 - ASTM International

4.1 This guide discusses various methods for evaluating the surface of structural concrete roof decks to receive adhered roofing system materials. 4.2 Methods for evaluating the surface of structural concrete roof decks to receive adhered roofing system materials included as part of a...

ASTM D7281-07(2025) - Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
December 1, 2025 - ASTM International

5.1 This test method provides a means of evaluating roof membranes, seams, and laps for resistance to water migration from standing water on the roof. This test method evaluates roof membranes when first applied and also after simulated deterioration caused by the ultraviolet...

ASTM D6878/D6878M-26 - Standard Specification for Thermoplastic Polyolefin-Based Sheet Roofing
May 1, 2026 - ASTM International

1.1 This specification covers flexible sheet made from thermoplastic polyolefin (TPO) as the principal polymer, intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain reinforcing fabrics or scrims. 1.2 The tests and property limits used to characterize the...

ASTM D8662/D8662M-26 - Standard Specification for Plastic Temporary Ceiling Construction Barriers for Installation Below Automatic Sprinklers
April 1, 2026 - ASTM International

4.1 These plastic temporary ceiling construction barriers are intended to be installed, for a limited period, into buildings where construction or renovation work is being performed on roofs or ceilings in order to protect equipment, workers, and other building occupants from falling dust or...

Advertisement