loading
SEMI MATERIALS - MATERIALS
SEMI
A description is not available for this item.
ASTM D7897-26 - Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
July 1, 2026 - ASTM International

1.1 Practice D7897 applies to simulation of the effects of field exposure on the solar reflectance and thermal emittance of roof surface materials including but not limited to field-applied coatings, factory-applied coatings, single-ply membranes, modified bitumen products, shingles, tiles,...

ASTM D7349/D7349M-15(2024) - Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal Around Fasteners
November 1, 2024 - ASTM International

1.1 This qualitative test method determines the capability of asphalt-based roofing or waterproofing material to seal around a fastener that penetrates the material and prevent transmission of liquid water through the material at the penetration under defined conditions....

ASTM D7897-18(2023) - Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
September 1, 2023 - ASTM International

1.1 Practice D7897 applies to simulation of the effects of field exposure on the solar reflectance and thermal emittance of roof surface materials including but not limited to field-applied coatings, factory-applied coatings, single-ply membranes, modified bitumen products, shingles, tiles,...

ASTM D3105-17(2024) - Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
January 1, 2024 - ASTM International

1.1 This index is provided for reference to aid in the selection of procedures and test methods used in the evaluation of sheet and liquid roofing materials, as appropriate. Composition specifications and analytical methods in general, as well as tests on raw materials, are not...

ASTM D8508/D8508M-25 - Standard Guide for Evaluating the Surface of Structural Concrete Roof Decks to Receive Adhered Roofing Systems
December 15, 2025 - ASTM International

4.1 This guide discusses various methods for evaluating the surface of structural concrete roof decks to receive adhered roofing system materials. 4.2 Methods for evaluating the surface of structural concrete roof decks to receive adhered roofing system materials...

ASTM D1970/D1970M-25 - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
December 1, 2025 - ASTM International

1.1 This specification covers polymer modified bituminous sheet materials intended for use as underlayment on roof eaves, or valleys, or both, to prevent leakage of shingle, tile, or metal roofs from water back-up due to ice dams. 1.2 These underlayment sheets have a sticky adhesive layer...

ASTM D7694/D7694M-18(2026) - Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material
May 1, 2026 - ASTM International

1.1 These test methods cover test procedures for prefabricated, reinforced, self-adhesive (SA) polymer-modified bituminous sheet materials designed for single- or multiple-ply application in roofing and waterproofing membranes. 1.2 These test methods specifically address the...

ASTM D6878/D6878M-26 - Standard Specification for Thermoplastic Polyolefin-Based Sheet Roofing
May 1, 2026 - ASTM International

This specification covers flexible sheet made from thermoplastic polyolefin (TPO) as the principal polymer, intended for use in single-ply roofing membranes exposed to the weather. The sheet shall contain reinforcing fabrics or scrims. The sheet shall be formulated from ethylene and higher...

ASTM D6164/D6164M-26 - Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
July 1, 2026 - ASTM International

This specification covers Grades G (granule surfaced) and S (smooth surfaced) prefabricated bituminous sheet materials reinforced with polyester fabric and modified by styrene butadiene styrene (SBS) thermoplastic elastomer, intended for use in the fabrication of multiple ply roofing...

ASTM D5869/D5869M-07a(2023) - Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
May 1, 2023 - ASTM International

5.1 Roofing and waterproofing materials and systems undergo changes in physical properties as a result of being subjected to heat. They also undergo changes in physical properties as they age in service. Since service conditions vary widely, any relationship between changes observed...

ASTM D8650/D8650M-26 - Standard Test Method for Determining Low-Temperature Flexibility of Liquid-Applied Polymeric Membranes Used in Roofing and Waterproofing
May 1, 2026 - ASTM International

4.1 This test method is used to determine the flexibility of a membrane at sub-ambient temperature. The results determine compliance with the applicable specification requirements or for comparative analysis. The results may be used to evaluate the performance of materials that are to be...

ASTM D7851-25 - Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
September 1, 2025 - ASTM International

1.1 This guide provides guidance and considerations related to designing sustainable low-sloped roofing systems, including exposed membrane roofs, membranes covered with landscaped and vegetative (green) overburden systems, ballasted roofs, and protected membrane roofing assemblies. A...

ASTM D8518-25 - Standard Guide for Application of Hot-Applied Rubberized Asphalt Roofing and Waterproofing
December 1, 2025 - ASTM International

4.1 Establishing standard practices and recommended procedures is a critical step required to achieve quality roofing and waterproofing system installations. This guide describes preparing typical substrates to receive hot-applied rubberized asphalt (HRA), melting and application of HRA,...

ASTM D5636/D5636M-94(2022) - Standard Test Method for Low-Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
November 1, 2022 - ASTM International

5.1 Since felts or sheet roofing or waterproofing materials are brought to the roof in a roll and unrolled, this test method simulates felt or membrane behavior under actual field conditions during the unrolling process. 5.2 This test method is designed to aid those interested in the...

ASTM D5683/D5683M-95(2022) - Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
November 1, 2022 - ASTM International

5.1 This test method is designed to aid those interested in the engineering properties of roofing and waterproofing sheet materials and membranes. 5.2 This test method enables a researcher to measure the relative flexibility of roofing and waterproofing sheet materials...

Advertisement