4.1 General-Most thickness gauges are not applicable to all combinations of coating-substrate thicknesses and materials. The limitations of a particular instrument are generally delineated by its manufacturer. The substrate material and coating combination to be measured as well as the inherent...
4.1 Proper bonding of coatings and linings to concrete surfaces requires proper cleaning and frequently requires the concrete to be roughened to increase the surface area. The roughness, also known as surface profile, can be imparted into concrete by abrasive blast cleaning, acid etching or...
5.1 Fracture mirror size analysis is a powerful tool for analyzing glass and ceramic fractures. Fracture mirrors are tell-tale fractographic markings in brittle materials that surround a fracture origin as discussed in Practices C1256 and C1322. Fig. 1 shows a schematic with key features identified...
5.1 These practices provide a means for evaluating traveled surface roughness characteristics directly from a measured profile. The calculated output values represent profilograph response to traveled surface roughness. 5.2 These practices provide pavement surface profiles to evaluate...
5.1 Corrosion inhibitors continue to play a key role in controlling internal corrosion associated with oil and gas production and transportation. This results primarily from the industry's extensive use of carbon and low alloy steels, which, for many applications, are economic materials of...
1.1 This guide outlines an appropriate experimental approach for evaluating the effects of physiologically relevant constant or cyclic loads (e.g. stresses, strains) on the performance characteristics of an absorbable metal implant or test specimen. 1.2 The intent of this guide is to encompass...
5.1 As stated in Terminology B542, contact resistance is comprised of a constriction resistance and a film resistance. When present, the latter of these is usually much greater in value and dominates the contact resistance. For a given contact spot, when the film resistance is zero or negligible...
5.1 As stated in Terminology B542, contact resistance is comprised of a constriction resistance and a film resistance. When present, the latter of these is usually much greater in value and dominates the contact resistance. For a given contact spot, when the film resistance is zero or negligible...
1.1 This test method covers the laboratory determination of the erosion function of a soil under horizontally flowing water over the surface of a vertical soil sample in an Erosion Function Apparatus (EFA).2 The erosion function is the site-specific relationships between the erosion rate of the...
This specification covers the general requirements for the 225/75R16C 116/114S radial light truck (European light duty vehicle) standard reference test. In this specification, a 16.0 rim diameter code standard tire design and constructions, standard dimensions, and specific conditions of storage...
4.1 This practice describes the methods of preparation of hot-dip galvanized surfaces prior to the application of powder coating. The key to achieving proper adhesion between powder coatings and galvanized steel is surface preparation. The surface must be entirely free from visible metal oxides...
5.1 All these test methods are recommended for elementary quantification of the morphological properties of porous coatings. 5.2 These test methods may be useful for comparative evaluations of different porous coatings or different lots of the same porous coating. 5.3 All the methods should be...
1.1 This specification covers the general requirements for the 245/70R19.5 136/134M radial truck standard reference test tire. The tire covered by this specification is primarily for use as a reference tire for braking traction, snow traction, and wear performance evaluations, but may also be used...
This specification covers requirements for ferrous and nonferrous inch balls. The balls are intended for use in bearings, bearing applications, check valves, and other components using balls. These balls are classified into fourteen kinds according to their chemical composition: Composition 1...
5.1 This test method establishes procedures for collecting elevation and distance data of longitudinal and transverse profiles on a traveled surface. 5.2 Results of this test are used primarily to: 5.2.1 Evaluate the roughness of traveled surfaces using any of several roughness...
This specification covers inner rings for needle roller bearings with drawn outer rings. The use of recycled materials that meet the requirements of the applicable material specification without jeopardizing the intended use of the item is encouraged. Bearing inner rings shall be manufactured of...
4.1 This test method provides a means for measuring the roughness of new or rehabilitated pavements. Results may differ between profilographs of different designs and therefore will not necessarily agree with roughness measurements by other profilographs or other...
4.1 The PCI is a numerical indicator that rates the surface condition of the pavement. The PCI provides a measure of the present condition of the pavement based on the distress observed on the surface of the pavement, which also indicates the structural integrity and surface operational condition...
4.1 The PCI is a numerical indicator that rates the surface condition of the pavement. The PCI provides a measure of the present condition of the pavement based on the distress observed on the surface of the pavement, which also indicates the structural integrity and surface operational condition...
3.1 Lamination factor S indicates the deficiency of effective material volume which is due to the presence of oxides, roughness, insulating coatings, and other conditions affecting the strip surface. 3.2 This test method is used to predict the fraction of metal that is included in the volume...
Narrow Your Results