loading
SMACNA ROUND DUCT CONST - ROUND INDUSTRIAL DUCT CONSTRUCTION STANDARDS
January 1, 2013 - SMACNA

The scope of this manual includes the determination of the necessary construction details for the fabrication and installation of round metallic industrial ductwork within the following general categories, and as further detailed in the scope of individual chapters, through a variety of both...

BARC-1274 - A FACSIMILE REPORT
NTIS
A description is not available for this item.
AMS4895 - Titanium Alloy, Round Bars 5Al - 1Fe Annealed
August 1, 2023 - SAE International

This specification covers a titanium alloy in the form of round bars up to 10 inches (254 mm), inclusive, in diameter.

ASTM D7957/D7957M-25 - Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
November 15, 2025 - ASTM International

1.1 This specification covers glass fiber reinforced polymer (GFRP) bars, provided in cut lengths and bent shapes and having an external surface enhancement for concrete reinforcement. Bars covered by this specification shall meet the requirements for geometric, material, mechanical,...

LN 1798 - Aerospace series - Round bars of wrought aluminium alloys, drawn - Dimensions, masses; Text in German and English
August 1, 2017 - DIN

This standard is applicable to drawn round bars of 4 mm to 50 mm in diameter made of materials as listed in clause 5.

AMS4957G - Titanium Alloy, Round Bar and Wire 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn
January 14, 2020 - SAE International

This specification covers a titanium alloy in the form of round bar and wire, 0.625 inch (15.88 mm) and under in nominal diameter or thickness.

ASTM E2714-26 - Standard Test Method for Creep-Fatigue Testing
May 15, 2026 - ASTM International

1.1 This test method covers the determination of mechanical properties pertaining to creep-fatigue deformation or crack formation in nominally homogeneous materials, or both by the use of test specimens subjected to uniaxial forces under isothermal conditions. It concerns fatigue testing at strain...

AS1260A - Equivalent Sections of Certain Shapes to Round Bars
November 25, 2014 - SAE International

Primarily to provide the aerospace industry with approximate standards for comparing various shaped sections to round bars, in determining the response to hardening characteristics when heat treating low-alloy and martensitic corrosion-resistant steels.

ASTM B392-26 - Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
July 1, 2026 - ASTM International

13.1 For the purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.

ASTM D7617/D7617M-25 - Standard Test Method for Transverse Shear Strength of Fiber-Reinforced Polymer Matrix Composite Bars
December 15, 2025 - ASTM International

5.1 This test method for transverse shear strength is intended for use in laboratory tests in which the principal variable is the size or type of FRP bars. The test may be used for smooth round rods or on bars with a textured or undulating surface added to promote bond of the...

ASTM C452/C452M-26 - Standard Test Method for Potential Expansion of Portland-Cement and Portland-Limestone Cement Mortars Exposed to Sulfate
June 15, 2026 - ASTM International

1.1 This test method, which is applicable only to portland cements and portland-limestone cements, covers the determination of the expansion of mortar bars made from a mixture of portland cement or portland-limestone cement and gypsum in such proportions that the mixture has a sulfur...

ASTM B425-26 - Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar
April 1, 2026 - ASTM International

This specification covers nickel-iron-chromiummolybdenum-copper alloy (UNS N08825 and UNS N08221) in the form of hot-finished and cold-drawn rounds, squares, hexagons, and rectangles. The material shall conform to the composition limits specified. The material shall conform to the mechanical...

ASTM A511/A511M-25 - Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
September 1, 2025 - ASTM International

1.1 This specification covers seamless stainless tubing for use in mechanical applications or as hollow bar for use in the production of hollow components such as, but not limited to nozzles, reducers, and couplings by machining where corrosion-resistant or high-temperature strength is...

ASTM A370-26 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
February 1, 2026 - ASTM International

1.1 These test methods cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided,...

AS1260 - Equivalent Sections of Certain Shapes to Round Bars
October 28, 2010 - SAE International

Primarily to provide the aerospace industry with approximate standards for comparing various shaped sections to round bars, in determining the response to hardening characteristics when heat treating low-alloy and martensitic corrosion-resistant steels.

ASTM B75/B75M-26 - Standard Specification for Seamless Copper Tube
March 1, 2026 - ASTM International

This specification establishes the requirements for seamless round, rectangular, and square copper tube (UNS Nos. C10100, C10200, C10300, C10800, C12000, and C12200) suitable for general engineering applications. The material of manufacture shall be billets, cast bars, or tube. The...

ASTM D8505/D8505M-25 - Standard Specification for Basalt and Glass Fiber Reinforced Polymer (FRP) Bars for Concrete Reinforcement
November 1, 2025 - ASTM International

1.1 This specification covers basalt and glass fiber reinforced polymer (BFRP and GFRP, respectively) bars, provided in straight (longitudinal) cut lengths, of solid round cross-section, and having a surface enhancement for internal concrete reinforcement applications. Bars...

ASTM A6/A6M-26a - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
April 1, 2026 - ASTM International

1.1 This general requirements specification covers a group of common requirements that, unless otherwise specified in the applicable product specification, apply to rolled structural steel bars, plates, shapes, and sheet piling covered by each of the following product specifications issued...

DIN LN 1798 - Aerospace - Round bars of wrought aluminium alloys, drawn - Dimensions, masses
December 1, 2001 - DIN

This standard is applicable to drawn round bars of 4 mm to 50 mm in diameter made of materials as listed in clause 5.

DS/EN 2036 - Aerospace series – Round steel bars ground – Dimensions – Tolerance h 8
August 7, 2017 - DS

This European Standard specifies the dimensions, tolerances and physical constants of ground round steel bars used in aerospace construction.

Advertisement