This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications.
4.1 This test method is used to evaluate the suitability of powdered rubber chemicals, particularly accelerators, for use in rubber compounds that require very small particle clusters to achieve a uniform cross-linked network. This test method is intended to be used to ensure that no...
1.1 This classification covers antidegradants used in rubber and where appropriate defines their important chemical and physical characteristics for use in rubber. 1.2 The general term "antidegradant" describes materials used in rubber to protect against the effects of...
1.1 This classification covers the variety of sulfur grades used in the rubber industry. Typical chemical and physical properties for sulfur are shown. Sulfur is principally used in unsaturated rubbers as a vulcanizing agent. 1.2 This international standard was developed in accordance...
1.1 This classification covers the compounding material known as titanium dioxide. It is generally used in rubber compounds to impart whiteness to selected products. Typical chemical and physical properties are included. 1.2 This standard does not purport to address all of the safety...
1.1 This classification system covers the compounding material commercially known as zinc oxide. The types of zinc oxide used in the rubber industry are related to the production process used. Typical chemical and physical properties are included. 1.2 This international standard was...
3.1 Commercially available computer material management programs are being used regularly in the rubber industry. These programs typically will retrieve information from a raw material or compounding material data base by chemical name, CAS registry number, trade name,...
3.1 These test methods may be used for quality control of zinc oxide used as a compounding material and for research and development studies where zinc oxide is used in a rubber mix.
1.1 This practice provides a listing of reference compounding materials required to prepare the rubber test compounds listed in succeeding methods and contains procedures for weighing. It also specifies the mixing equipment, general mixing procedures, vulcanization equipment and...
4.1 MBT is commonly used in rubber compounding as a curing accelerator for rubber and latex products. The determination of MBT in cured rubber is important to assess the risk of a release of this hazardous substance when rubber is in prolonged contact with human skin or...
3.1 Class 1, Sulfenamides: 3.1.1 As a group, the 2-benzothiazyl sulfenamides are the principle sulfur vulcanization accelerators used in the rubber industry today. The role of these materials in vulcanization is dual. They provide scorch time (delay period) in the crosslinking or...
1.1 This classification covers the compounding material known as ground coal. It is generally used in rubber compounds as a filler. 1.2 There are three grades of ground coal based on particle size, ash, and moisture. The selected values for these properties are suitable for use in a...
3.1 Stearic acid is important in the rubber vulcanization process. It is believed that the stearic acid reacts with zinc-oxide or other metallic oxides, during vulcanization, to form a rubber soluble salt or soap, that reacts with the accelerator enabling it to exert its full effect....
4.1 This test method is designed to determine the water content of various rubber accelerators. Since 2-mercaptobenzothiaz
4.1 The test method is designed to assess the purity of MBTS, which is used for rubber and latex vulcanization acceleration. The amount of MBTS is of importance in predicting performance in rubber compounds and for raw material purchase and control. 4.2 This test method may be...
4.1 2-Mercaptobenzothiaz
1.1 These test methods cover the determination of metals in rubber compounding materials by flame atomic absorption. 1.2 The test methods include the following materials: Sections Zinc oxide 11 - 20 1.3 The values stated in SI units are to be regarded as standard. No other...
Narrow Your Results