1.1 This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 Definitions for terms that have been established by other bodies recognized as expert in...
1.1 This classification covers the compounding material known as titanium dioxide. It is generally used in rubber compounds to impart whiteness to selected products. Typical chemical and physical properties are included. 1.2 This standard does not purport to address all of the safety...
1.1 This guide covers test methods for synthetic plasticizers that are used in rubber applications. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate...
1.1 These test methods cover the qualitative and quantitative analysis of the composition of rubber products of the "R" family (see 3.1). Many of these test methods may be applied to the analysis of natural and synthetic crude rubbers. 1.1.1 Part A consists of general test methods for...
3.1 For research, development, and quality control purposes, it is advantageous to determine the composition of rubbers in cured, compounded products. 3.2 This practice provides such composition analysis, utilizing a gas chromatograph and pyrolysis products from rubber decomposition.
1.1 This classification is intended to establish classification and test methods for certain types of oil used in extending and processing styrene-butadiene rubbers (SBR) and butadiene rubbers (BR). Its purpose is for classification only and not for specification. 1.2 This standard...
5.1 This test method is used to measure viscoelastic properties of raw rubber as well as unvulcanized rubber compounds. These viscoelastic properties may relate to factory processing behavior. 5.2 This test method may be used for quality control in rubber manufacturing...
This specification covers preformed open-cell sponge rubber gaskets, for use in new or reconditioned pails or drums, of the following classes: Class A and Class B, each divided into Grade 1, Grade 2, and Grade 3. Cellular sponge rubber gaskets shall be made by incorporating a blowing...
2.1 Rubber hose has an inherent characteristic of permitting diffusion of a gas through the hose structure. This test method quantitatively measures the loss of liquefied petroleum gas.
1.1 This test method covers the use of a sealed cavity rotorless oscillating shear rheometer for the measurement of the softening effects of rising sinusoidal strain when applied to an unvulcanized rubber compound containing significant amounts of colloidal fillers (such as silica or carbon...
This standard covers the test methods for synthetic rubber lattices ABR, BR, CR, IIR, NBR, NCR, NIR, PBR, PSBR, SBR, SCR, SIR, synthetic rubber lattices with substituted carboxylic acid groups on the polymer chain, and reinforced synthetic rubber lattices. Covered tests include...
4.1 The rubber-filler interaction needed in silica technology for the rubber industry is based on the use of silane-coupling agents that react with the silanol groups on the surface of the silica during the processing step called silanization. Silane-coupling agents are...
4.1 The general end-use quality of manufactured rubber products depends on the physical and chemical properties of the rubber.
3.1 These tests are mainly intended for referee purposes but may be used for quality control of rubber production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. 3.2 These tests may also be used to obtain...
4.1 Color of material rubber is of importance in compounds where product color is determined by the color of the raw rubber.
1.1 This test method covers the determination of the indentation of rubber or rubber-like materials by means of the Pusey and Jones type of plastometer. This apparatus is used to measure the depth of indentation of an indentor, under fixed force into the surface of a specimen. 1.2 The...
5.1 This test method is useful for determining the variability in material and the influence of parameters affecting the stress-strain properties of rubber vulcanizates, for example, temperature, relative humidity, preconditioning of rubber, and so forth. This test method is...
4.1 This test method is intended for referee purposes, but may be used for quality control, research and development testing and comparison of different rubber samples in a standard formula. 4.2 This test method may also be used to obtain values for customer acceptance of rubber. 4.3...
Narrow Your Results