loading
ISA SAFETY PROFILES FOR R - Safety Profiles for Real-Time Ethernet-Based Industrial Automation Networks
January 1, 2009 - ISA

Part of the ISA/O3neida series, this book discusses network systems in industrial automation and their features related to real-time and functional safety requirements. The basics of standard Ethernet are introduced, specifying the Open System Interconnection (OSI) reference model layers and...

API SAFETY & FIRE BINDER - SAFETY AND FIRE PROTECTION BINDER
API
A description is not available for this item.
NEMA SAFETY GUIDE - SAFETY GUIDE FOR USE OF EXTENSION CORDS
NEMA
A description is not available for this item.
SWRI SAFETY & HEALTH - Safety & Health Field Manual
SWRI
A description is not available for this item.
ISA SAFETY INSTRUMENTED S - SAFETY INSTRUMENTED SYSTEMS: A LIFE-CYCLE APPROACH
ISA
A description is not available for this item.
ASTM E144-14(2026) - Standard Practice for Safe Use of Oxygen Combustion Vessels
June 1, 2026 - ASTM International

1.1 This practice covers methods for judging the soundness of new and used oxygen combustion vessels, and describes the precautions to be observed in oxygen combustion vessel methods. 1.2 This practice is applicable to all procedures in which samples are completely oxidized by combustion in a metal...

ASTM E2930-26 - Standard Practice for Pressure Decay Leak Test Method
July 1, 2026 - ASTM International

5.1 The equipment, test duration, and technique should be determined before commencement of the test based on the required test sensitivity or accuracy (see Annex A1 and Annex A2). If the test is used to certify that the vessel has a maximum specified leakage rate, then the test equipment and test...

ASTM F2388-21(2026) - Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
July 1, 2026 - ASTM International

1.1 This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing products including changing tables, changing table accessories, contoured changing pads, and add-on changing units. 1.2 This specification...

ASTM D1993-22(2026) - Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
July 1, 2026 - ASTM International

1.1 This test method covers a procedure which is used to measure the surface area of precipitated hydrated silicas by the conventional Brunauer, Emmett, and Teller (BET) theory of multilayer gas adsorption behavior using multipoint determinations, similar to that used for carbon black in Test...

ASTM E2550-26 - Standard Test Method for Thermal Stability by Thermogravimetry
July 1, 2026 - ASTM International

1.1 This test method describes the assessment of material thermal stability through the determination of the temperature at which the materials start to decompose or react and the extent of the mass change using thermogravimetry. The test method uses minimum quantities of material and is applicable...

ASTM E2128-26 - Standard Guide for Evaluating Water Leakage of Building Walls
July 1, 2026 - ASTM International

1.1 This guide covers methods for determining and evaluating causes of water leakage of exterior walls. For this purpose, water penetration is considered leakage, and therefore problematic, if it exceeds the planned resistance or temporary retention and drainage capacity of the wall, is causing or...

ASTM F402-26 - Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
April 1, 2026 - ASTM International

1.1 This practice covers procedures for safe handling of solvent cements, primers, and cleaners used in joining thermoplastic pipe and fittings. The procedures are general ones and include safeguards against hazards of fire and precautions for protection of personnel from breathing of vapors...

ASTM C1838-16(2026) - Standard Practice for Cleaning for 1S and 2S Bottles
June 1, 2026 - ASTM International

4.1 The uranium hexfluoride (UF6), as described in Specifications C787 and C996, has to meet different requirements: one set of requirements being safety, health physics, and criticality and the other set being chemical, physical, and isotopic. To ensure the UF6 is in compliance with all...

ASTM D6897-26 - Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
June 1, 2026 - ASTM International

5.1 Information on the vapor pressures of liquefied petroleum gas is pertinent to selection of properly designed storage vessels, shipping containers, and customer utilization equipment to ensure safe handling of these products. 5.2 Determination of the vapor pressure of liquefied petroleum...

ASTM F2462-05(2026) - Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
June 1, 2026 - ASTM International

5.1 This is intended to outline O&M issues that require discussion and mutual agreement by both the optical fiber cable owner and sewer pipeline operator. The purpose is developing sufficient written procedures and practices to allow optical fiber systems to coexist as a secondary use within a...

ASTM E3325-21(2026) - Standard Practice for Sampling of Solar Photovoltaic Modules for Toxicity Testing
June 1, 2026 - ASTM International

6.1 The primary goal of this practice is to extract representative samples from PV modules for TCLP toxicity testing purposes in order to receive unbiased, comparable, and repeatable toxicity test results from independent TCLP testing laboratories. 6.2 Solar photovoltaic (PV) modules in the United...

Advertisement