Part of the ISA/O3neida series, this book discusses network systems in industrial automation and their features related to real-time and functional safety requirements. The basics of standard Ethernet are introduced, specifying the Open System Interconnection (OSI) reference model layers and...
1.1 Infrared spectroscopy (IR) is a valuable method for the identification and comparison of pressure sensitive tapes (1-23). This guide covers basic recommendations and information about IR spectrometers and accessories, with an emphasis on sampling techniques specific to pressure sensitive...
1.1 Infrared spectroscopy (IR) is a valuable method for the identification and comparison of pressure sensitive tapes (1-23). This guide covers basic recommendations and information about IR spectrometers and accessories, with an emphasis on sampling techniques specific to pressure sensitive...
1.1 These test methods cover procedures for testing pressure-sensitive adhesive-coated tapes to be used as electrical insulation. These tapes are classified as follows: 1.1.1 Class 1-Non-elastomeric backings made from materials such as: Paper, flat or creped, Fabric, uncoated or...
1.1 These test methods describe procedures for assessing the adhesion of metallic and inorganic coatings and other thin films to metallic and nonmetallic substrates. Assessment is made by applying pressure-sensitive tape to a coated surface and then utilizing a mechanical device to remove...
1.1 This practice covers the nondestructive testing of field seams in geomembranes using the spark test. A suspect area is indicated by the generation of a spark. The test is applicable to seams made by the extrusion method, seams made by using welding tape (a strip of the same type of...
2.1 This terminology is mainly for use with ASTM Committee E30.15 Trace standards. 2.2 These terms have particular application to the analysis of trace materials, including but not limited to fibers, glass, hair, paint, tape, and geological materials. In addition, several sources of...
1.1 This test method covers laboratory determination of the time-to-failure (creep-rupture) of joints fabricated from nonbituminous organic roof membrane material. The test method covers both T-peel and lap-shear joints subjected to constant tensile load under controlled environmental conditions....
1.1 This practice covers sample preparation temperatures, test parameters, and specimen exposure conditions that are applicable when Test Method D5405/D5405M is used for conducting time-to-failure (creep-rupture) tests of adhesive joints fabricated from ethylene-propylene-d
1.1 This test method describes the determination of the Mode I dominant fracture toughness, GIc, associated with facesheet-to-core separation of sandwich constructions using the single cantilever beam (SCB) specimen. This separation can consist of a disbond of the facesheet-to-core interface or a...
5.1 Preformed tape sealants are tacky, deformable solids that are used under compression between two substrates in various sealing applications. These tapes are usually supplied in roll form with a release paper interlayer. When the roll is unwound and the release paper is removed...
5.1 Preformed tape sealants are tacky, deformable solids that are used under compression between two substrates in a variety of sealing applications. Compared to other types of sealants, that is, gunnable sealants and caulks, sealing tapes are designed to be essentially 100?% solids...
1.1 These test methods cover the measurement of the peel adhesion of pressure-sensitive tapes. 1.1.1 Test Method A gives a measure of the adherence, when peeled at 180° angle, to a standard steel panel or to other surface of interest for a single-coated tape. 1.1.2 Test Method B gives...
Narrow Your Results