loading
ASTM A103-27 - Methods of Sampling Ferro-Alloys (Withdrawn March 1939)
January 1, 2027 - ASTM International
A description is not available for this item.
ASTM D4211-26 - Standard Guide for Fish Sampling
July 1, 2026 - ASTM International

4.1 Fish sampling includes a number of lethal and non-lethal practices. 4.2 This guide provides an overview of commonly used fish sampling practices. 4.3 This summary serves as a brief accounting of options available to personnel responsible for determining the fish sampling...

ASTM D6206-26 - Standard Practice for Sampling of Coating Films
June 1, 2026 - ASTM International

3.1 Specimens for analysis must be adequately sampled, packaged, and documented to obtain meaningful information from the laboratory. The sampling procedure and packaging is dependent upon the reason for taking the sample.

ASTM D4211-21(2026) - Standard Guide for Fish Sampling
May 1, 2026 - ASTM International

4.1 Fish sampling includes a number of lethal and non-lethal practices. 4.2 This guide provides an overview of commonly used fish sampling practices. 4.3 This summary serves as a brief accounting of options available to personnel responsible for determining the fish sampling...

ASTM D75/D75M-19(2026) - Standard Practice for Sampling Aggregates
May 1, 2026 - ASTM International

4.1 Sampling is equally as important as the testing, and the sampler shall use every precaution to obtain samples that will show the nature and condition of the materials which they represent. 4.2 Samples for preliminary investigation tests are obtained by the party responsible...

ASTM D4354-26 - Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing
July 1, 2026 - ASTM International

1.1 This practice covers three procedures for the sampling of geosynthetics and rolled erosion control products (RECPs) for testing. This practice requires that instructions on taking laboratory samples and test specimens be part of every test method for geosynthetics. 1.1.1 The first...

ASTM D6659-16(2026) - Standard Practice for Sampling and Preparation of Wet Blue and Wet White for Physical and Chemical Tests
July 1, 2026 - ASTM International

1.1 This practice covers the sampling and preparation of Wet Blue and Wet White for physical and chemical tests. The product is grouped into lots that are randomly sampled in such a manner as to produce a representative sample of the lot. This sample may be used to...

ASTM E3325-21(2026) - Standard Practice for Sampling of Solar Photovoltaic Modules for Toxicity Testing
June 1, 2026 - ASTM International

6.1 The primary goal of this practice is to extract representative samples from PV modules for TCLP toxicity testing purposes in order to receive unbiased, comparable, and repeatable toxicity test results from independent TCLP testing laboratories. 6.2 Solar photovoltaic (PV) modules in the...

ASTM C311/C311M-26 - Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete
June 15, 2026 - ASTM International

1.1 These test methods cover procedures for sampling and testing coal ash and raw or calcined pozzolans for use in concrete. 1.2 The procedures appear in the following order: Sections Sampling 7 CHEMICAL ANALYSIS Reagents and apparatus 10 Moisture content 11 and 12 Loss on ignition 13...

ASTM C1255-26 - Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
July 1, 2026 - ASTM International

1.1 This test method covers the energy dispersive X-ray fluorescence (EDXRF) spectrochemical analysis of trace levels of uranium and thorium in soils. Any sample matrix that differs from the general ground soil composition used for calibration (that is, fertilizer or a sample of...

ASTM E834-21(2026) - Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
July 1, 2026 - ASTM International

1.1 This practice covers a technique for collecting samples of materials that are part of the residual gas environment of an evacuated vacuum chamber. The practice uses a device designated as a "cold finger" that is placed within the environment to be sampled and is cooled so that...

ASTM D6752/D6752M-26 - Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
August 1, 2026 - ASTM International

4.1 The results obtained from this method can be used to determine the unit weight of compacted asphalt mixtures, and in conjunction with Test Method D3203, to obtain percent air voids. These values in turn may be used in determining the relative degree of compaction. 4.2 Since specific gravity has...

ASTM D3896-07(2026) - Standard Practice for Rubber From Synthetic Sources—Sampling
April 1, 2026 - ASTM International

1.1 This practice, intended for referee purposes, covers a uniform procedure for sampling lots of solid synthetic rubbers. Raw synthetic rubber generally is marketed in bales or packages of various sizes. 1.2 A procedure for determining the acceptability of lots of synthetic rubber is given....

ASTM D1357-26 - Standard Practice for Planning the Sampling of the Ambient Atmosphere
April 1, 2026 - ASTM International

1.1 The purpose of this practice is to present the broad concepts of sampling the ambient air for the concentrations of contaminants. Detailed procedures are not discussed. General principles in planning a sampling program are given including guidelines for the selection of sites and...

ASTM D8112-26 - Standard Guide for Sampling, In-Service Lubricating Oils and Hydraulic Fluids in Industrial Applications
May 1, 2026 - ASTM International

1.1 This guide applies to the collection of representative samples of in-service lubricating oils and hydraulic fluids used in industrial applications to support an effective condition monitoring program. 1.2 Two primary reasons for in-service sampling of lubricating oils and...

ASTM D1177-22(2026) - Standard Test Method for Freezing Point of Aqueous Engine Coolants
August 1, 2026 - ASTM International

1.1 This test method covers the determination of the freezing point of an aqueous engine coolant solution in the laboratory. Note 1: Where solutions of specific concentrations are to be tested, they shall be prepared from representative samples as directed in Practice D1176. Secondary phases...

ASTM C140/C140M-26a - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
June 1, 2026 - ASTM International

1.1 These test methods provide various testing procedures commonly used for evaluating characteristics of concrete masonry units and related concrete units. Methods are provided for sampling, measurement of dimensions, compressive strength, absorption, unit weight (density), moisture...

ASTM D7237-18(2026) - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
July 15, 2026 - ASTM International

1.1 This test method is used to establish the concentration of free cyanide in an aqueous wastewater, effluent and in-stream free cyanide concentrations after mixing treated water with receiving water. The test conditions of this test method are used to measure free cyanide (HCN and CN-) and...

ASTM D6714-16(2026) - Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
July 1, 2026 - ASTM International

1.1 This test method covers the determination of chromic oxide in Wet Blue that has been partly or completely tanned with chromium compounds. In general the samples will contain chromium content between 1?% and 5?%, calculated as chromic oxide expressed upon a dry basis otherwise referred to...

Advertisement