loading
SAND 84-0178 - ECONOMIC RICKS OF NUCLEAR POWER REACTOR ACCIDENTS
NTIS
A description is not available for this item.
ASTM A536-26a - Standard Specification for Ductile Iron Castings
July 1, 2026 - ASTM International

This specification covers ductile iron castings, also known as spheroidal or nodular iron, that is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite. Appropriate heat treatment shall be identified according to grades,...

ASTM B940-05(2026) - Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
May 1, 2026 - ASTM International

4.1 This practice is applicable to non-chromate coatings that are colorless, colored, electrochemically applied or non-electrochemically applied. The zinc or cadmium, or both, may be electrodeposited, mechanically deposited, hot-dipped, rolled, or in the form of castings. 4.2 Because of...

ASTM E2349-26 - Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
January 1, 2026 - ASTM International

1.1 This practice covers the requirements of applying the design, construction, and operation of the machinery and equipment used in metal casting operations-sand preparation, molding and core making, melting and pouring, and cleaning and finishing. This practice does not apply...

ASTM C1088-26 - Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
June 1, 2026 - ASTM International

This specification covers thin veneer brick units made from clay, shale, fire clay, sand, or mixtures thereof, and fired to incipient fusion for use in adhered or fastened veneer applications. The brick units shall be available in both Grades Interior and Exterior of the following types:...

ASTM B320-25 - Standard Practice for Preparation of Iron Castings for Electroplating
November 1, 2025 - ASTM International

2.1 The proper establishment and maintenance of a pre-electroplating cycle for iron castings is often critical to facilitate subsequent finishing. 2.2 This practice outlines recommended procedures to produce adherent finishes on surfaces of iron castings.

ASTM A216/A216M-26 - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
April 1, 2026 - ASTM International

1.1 This specification covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought steel parts by fusion welding. 1.2 Three grades, WCA, WCB, and WCC,...

ASTM A536-26 - Standard Specification for Ductile Iron Castings
April 1, 2026 - ASTM International

This specification covers ductile iron castings, also known as spheroidal or nodular iron, that is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite. Appropriate heat treatment shall be identified according to grades,...

ASTM C926-26 - Standard Specification for Application of Portland Cement-Based Plaster
April 1, 2026 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM B969/B969M-25 - Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
December 1, 2025 - ASTM International

This specification covers the material, chemical and mechanical requirements for aluminum-alloy castings produced by the thixocast, rheocast, semi-solid and squeeze casting processes. It does not apply to castings used in aerospace applications. Castings shall conform to...

ASTM F502-25 - Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
October 1, 2025 - ASTM International

This test method covers determination of the effects of cleaning solutions and chemical maintenance materials on painted aircraft surfaces. Materials used for testing shall be drawing pencils, fine sand paper, abrasive mats, acetone, MIL-PRF-85285 coating, MIL-PRF-23377 primer...

ASTM G37-98(2025) - Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
October 1, 2025 - ASTM International

1.1 This practice covers the preparation and use of Mattsson's solution of pH 7.2 as an accelerated stress-corrosion cracking test environment for brasses (copper-zinc base alloys). The variables (to the extent that these are known at present) that require control are described together with...

ASTM C1364-25 - Standard Specification for Architectural Cast Stone
September 1, 2025 - ASTM International

This specification establishes the physical requirements, sampling, testing, and visual inspection of architectural cast stone that may be made from facing and backup mixtures or from a homogeneous mixture, produced either by wet or dry casting. Conformances for raw materials, Portland...

ASTM A217/A217M-25 - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
May 1, 2025 - ASTM International

This specification covers steel castings, martensitic stainless steel and alloys steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature and corrosive service. The grades of steels covered here are: Grade WC1, Grade...

ASTM D2093-03(2025) - Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
February 1, 2025 - ASTM International

4.1 This practice is useful for reducing some of the surface variability of plastics (due to differences in manufacturing methods) that might otherwise cause excessive variation in the results of ASTM test methods designed to measure adhesion. The treatments specified are convenient for...

ASTM C660-24 - Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
November 1, 2024 - ASTM International

1.1 These practices are intended to indicate certain casting characteristics and pre-enameling practices which will facilitate finishing by the wet- or dry-process methods of porcelain enameling. All of the listed recommendations are based on experiences with gray iron casting...

ASTM A159-83(2024) - Standard Specification for Automotive Gray Iron Castings
October 1, 2024 - ASTM International

This specification covers gray iron castings for products of the automobile, truck, tractor and allied industries. The materials shall be classified into eight grades (G1800, G2500, G3000, G3500, G4000, G2500a, G3500b and G3500c) based on the range of their casting hardness, chemical...

ASTM F502-08(2024) - Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
December 1, 2024 - ASTM International

This test method covers determination of the effects of cleaning solutions and chemical maintenance materials on painted aircraft surfaces. Materials used for testing shall be drawing pencils, fine sand paper, abrasive mats, acetone, MIL-PRF-85285 coating, MIL-PRF-23377 primer...

ASTM A834-24 - Standard Specification for Common Requirements for Iron Castings for General Industrial Use
October 1, 2024 - ASTM International

This specification covers the standard common requirements for iron castings to be used for general industrial applications. The castings shall be made in a workman-like manner and shall conform to the dimensions on drawings furnished by the purchaser before manufacture is started. A...

ASTM A536-24 - Standard Specification for Ductile Iron Castings
August 15, 2024 - ASTM International

This specification covers ductile iron castings, also known as spheroidal or nodular iron, that is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite. Appropriate heat treatment shall be identified according to grades,...

Advertisement