loading
ASTM B614-26 - Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
April 1, 2026 - ASTM International

This practice covers a cleaning and de-scaling procedure useful to producers, users, and fabricators of zirconium and zirconium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. Grease,...

ASTM C926-26 - Standard Specification for Application of Portland Cement-Based Plaster
April 1, 2026 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM B348/B348M-25 - Standard Specification for Titanium and Titanium Alloy Bars and Billets
November 1, 2025 - ASTM International

This specification covers annealed bars and grills made from titanium or its alloys. All material grades covered should conform to the required chemical composition requirements. Elements that are intentionally added to the melt should be identified, analyzed and reported in the chemical analysis....

ASTM C1048-25 - Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
January 1, 2025 - ASTM International

This specification covers heat-treated flat glass - kind HS, kind FT coated and uncoated glass used in general building construction. Glass furnished under this specification shall be of the following conditions: condition A - uncoated surfaces, condition B - spandrel glass, one surface ceramic...

ASTM C926-24 - Standard Specification for Application of Portland Cement-Based Plaster
May 1, 2024 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM F1295-24 - Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
March 15, 2024 - ASTM International

This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed, cold worked, or hot rolled titanium-6aluminum-7niobium alloy (UNS R56700) bar and wire to be used in the manufacture of surgical implants. Titanium mill products covered in this specification...

ASTM E1300-24 - Standard Practice for Determining Load Resistance of Glass in Buildings
March 1, 2024 - ASTM International

1.1 This practice covers procedures to determine the load resistance (LR) of specified glass types, including combinations of glass types used in a sealed insulating glass (IG) unit, exposed to a uniform lateral load of short or long duration, for a specified probability of breakage. 1.2 This...

ASTM C926-23a - Standard Specification for Application of Portland Cement-Based Plaster
November 15, 2023 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM F1295-23 - Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
April 1, 2023 - ASTM International

This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed, cold worked, or hot rolled titanium-6aluminum-7niobium alloy (UNS R56700) bar and wire to be used in the manufacture of surgical implants. Titanium mill products covered in this specification...

ASTM C926-23 - Standard Specification for Application of Portland Cement-Based Plaster
March 1, 2023 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM F1472-23 - Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
February 1, 2023 - ASTM International

This specification covers the requirements for wrought titanium-6aluminum-4vanadium alloy for use in surgical implant applications. The material shall be manufactured by multiple melting in plasma arc and electron beam furnaces into strip, sheet, plate, bar, forging bar, or wire. The material shall...

ASTM E2461-22 - Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
December 15, 2022 - ASTM International

1.1 This practice covers the determination of the thickness of glass installed in airport traffic control towers (ATCT) to resist a specified design loading with a selected probability of breakage less than or equal to either 1 lite per 1000 or 4 lites per 1000 at the first occurrence of the design...

ASTM C926-22c - Standard Specification for Application of Portland Cement-Based Plaster
December 1, 2022 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM F1295-22 - Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
November 15, 2022 - ASTM International

This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed, cold worked, or hot rolled titanium-6aluminum-7niobium alloy (UNS R56700) bar and wire to be used in the manufacture of surgical implants. Titanium mill products covered in this specification...

ASTM B600-22 - Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
October 1, 2022 - ASTM International

This guide covers a cleaning and descaling procedure useful to producers, users, and fabricators of titanium and titanium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. It is...

ASTM C926-22b - Standard Specification for Application of Portland Cement-Based Plaster
October 1, 2022 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM C926-22a - Standard Specification for Application of Portland Cement-Based Plaster
August 15, 2022 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM C926-22 - Standard Specification for Application of Portland Cement-Based Plaster
June 1, 2022 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

ASTM B348/B348M-21 - Standard Specification for Titanium and Titanium Alloy Bars and Billets
November 1, 2021 - ASTM International

This specification covers annealed bars and grills made from titanium or its alloys. All material grades covered should conform to the required chemical composition requirements. Elements that are intentionally added to the melt should be identified, analyzed and reported in the chemical analysis....

ASTM C926-21 - Standard Specification for Application of Portland Cement-Based Plaster
October 1, 2021 - ASTM International

This specification covers the standard requirements for the application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. It also sets forth tables for proportioning of various plaster mixes and plaster thickness. The materials used shall consist of the...

Advertisement