loading
ASTM D3222-21(2026) - Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
July 1, 2026 - ASTM International

1.1 This specification covers melt processable molding and extrusion materials, as well as coating materials of poly(vinylidene fluoride) fluoroplastic, commonly abbreviated PVDF (or PVF2 in scientific literature). This specification covers thermoplastic resin materials supplied in pellet or...

ASTM E3450-26 - Standard Practice for Physical Fit Analysis Training Program
May 15, 2026 - ASTM International

3.1 The procedures outlined herein are grounded in the generally accepted body of knowledge and experience in the field of forensic physical fit examination and comparison. 3.2 A physical fit analysis training program provides a theoretical foundation and basic practical skills necessary to prepare...

ASTM F2272-26 - Standard Specification for Paintball Markers
May 1, 2026 - ASTM International

This specification covers the performance requirements and test methods for paintball markers that propel paintballs using energy released from compressed air, compressed gas, or a combination of compressed air and gas. This does not cover non-recreational paintball markers such as those used in...

ASTM E3469-26 - Standard Practice for Validating End-User Sterilizing Filtration of Pharmaceutical, Biopharmaceutical, and Biological Products
April 1, 2026 - ASTM International

4.1 This practice may be used to evaluate the microbial retentivity of any membrane filter used for liquid sterilization where validation is required in the manufacturing of pharmaceutical, biopharmaceutical, and biological products or their intermediates (where applicable). These processes may...

ASTM E2548-26 - Standard Practice for Sampling Seized Drugs for Qualitative and Quantitative Analysis
April 1, 2026 - ASTM International

4.1 This practice provides information for the sampling of seized-drug submissions. 4.2 The principal purpose of sampling in the context of this practice is to answer relevant questions about a population by examination of a portion of the population. For example: What is the net weight of the...

ASTM E3357-26 - Standard Terminology for Combination Products (Drug/Medical Device/Biologic Combinations)
April 1, 2026 - ASTM International

3.1 Currently, there are a variety of terminologies and interpretations applied across jurisdictions globally with respect to combined use of medical products in which two or more differently regulated medical products are to be used together or are being studied for use together to achieve an...

ASTM E3527-26 - Standard Guide for Preservation of Microorganisms
April 1, 2026 - ASTM International

5.1 This guide describes best practices to address characterization, storage, maintenance, and stabilization of microorganisms and the critical need for standardized and reliable methods in microbiology. 5.2 Proper preservation of microorganisms is fundamental to numerous scientific,...

ASTM ASTM51900-19(2026) - Standard Guidance for Dosimetry for Radiation Research
May 1, 2026 - ASTM International

1.1 This document covers essential recommendations for dosimetry needed to conduct research on the effects of ionizing radiation on materials, products and biological samples. Such research includes establishment of the quantitative relationship between absorbed dose and the relevant effects. This...

ASTM E3300-26 - Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Factors Affecting Ebullition and Evaluating Ebullition Activity and the Associated Ebullition-Facilitated Transport of NAPL/Contaminants
April 1, 2026 - ASTM International

4.1 Intended Users: 4.1.1 This guide may be used by various parties involved in programs evaluating ebullition activity or NAPL/contaminants EFT in sediment (or both), including regulatory agencies, project sponsors, environmental consultants, risk assessors, site remediation professionals,...

ASTM F1972-26 - Standard Terminology for Candles and Associated Accessory Items
February 1, 2026 - ASTM International

3.1 This terminology is used to establish a set of definitions that allows manufacturers, consumers, retailers, and the scientific community to use a common language to define candles and associated accessory items.

ASTM D4239-26 - Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
February 1, 2026 - ASTM International

4.1 Sulfur is part of the ultimate analysis of coal and coke. 4.2 Results of the sulfur analysis are used for evaluation of coal preparation and cleaning, evaluation of potential sulfur emissions from coal and coke combustion or conversion processes, and evaluation of coal and coke quality in...

ASTM D7034-26 - Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
April 1, 2026 - ASTM International

1.1 This guide provides methodology to assist in interpreting results of air quality measurements conducted in aircraft cabins. In particular, the guide describes methodology for assessing the impacts of concentrations for airborne chemical contaminants, based on health and comfort considerations,...

ASTM E3345-26 - Standard Practice for Opinions on the Interpretation of Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
February 1, 2026 - ASTM International

1.1 This practice covers the range of opinions that are currently supported by the existence of a body of published scientific literature. This practice does not address all possible circumstances that might be encountered when giving an opinion. 1.2 The use of this practice presumes that...

ASTM E3093-26 - Standard Guide for Structured Small Group Product Evaluations
February 1, 2026 - ASTM International

4.1 Using best practices for SGPE ensures that decisions made will be based on scientific principles, and the outputs obtained will be more objective than those evaluation sessions conducted without this planning, structure, focus, and best practices. These small group evaluations contrast...

ASTM E2565-21(2026) - Standard Guide for Consensus-Based Process for an Occupational Safety and Health Standard That Includes an Occupational Exposure Guideline
January 1, 2026 - ASTM International

5.1 This guide is designed to help identify and integrate affected stakeholder interests and to include relevant scientific and technical information when developing occupational safety and health standards that include or are proposed to include an OEG. 5.2 This guide shall be used when...

ASTM D7400/D7400M-26 - Standard Test Methods for Downhole Seismic Testing
February 15, 2026 - ASTM International

1.1 These test methods address compression (P) and shear (S) waves propagating in the downward direction in a nearly vertical plane. The seismic waves can be denoted as PV or PZ for a downward propagating compression wave and as SVH or SZX for downward propagating and horizontally polarized shear...

ASTM D4236-26 - Standard Practice for Labeling Art Materials for Chronic Health Hazards
January 1, 2026 - ASTM International

This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated...

ASTM F3295-18(2026) - Standard Guide for Impingement Testing of Total Disc Prostheses
January 1, 2026 - ASTM International

5.1 This guide can be used to develop test parameters for evaluating fatigue and wear behavior of IVD prostheses under impingement loading. It must be recognized, however, that there are likely many possible impingement conditions for a given IVD prosthesis. 5.2 The user should attempt to determine...

ASTM F1360-25a - Standard Specification for Ovens, Microwave, Electric
December 1, 2025 - ASTM International

This specification covers commercial microwave ovens. These ovens use ultrahigh frequency electromagnetic radiation in the approved industrial, scientific, and medical bands to defrost, heat, and cook food. The microwave ovens are classified by types, sizes, groups, styles, and classes. In...

Advertisement