loading
ASTM F2414-04(2023) - Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
July 1, 2023 - ASTM International

1.1 This practice covers proposed selection of materials, installation techniques, and inspection required for sealing manholes using chemical grout. Manholes or sections of manholes with active leaks shall be repaired. Manholes to be grouted are of brick, block,...

ASTM C1964-26 - Standard Practice for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Post Backfill
February 1, 2026 - ASTM International

5.1 This is not a routine test. The values recorded are applicable only to the manhole being tested and at the time of testing. 5.2 This permits the ability to field test manholes in the installed state as a system. 5.3 This allows contractors to field test manholes.

ASTM F2551-09(2023) - Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
July 15, 2023 - ASTM International

1.1 This specification describes all the work required to structurally reinforce, seal, and protect sanitary sewer manholes. Applications include applying a prepackaged cementitious liner that can function as a full depth restoration or a partial depth repair. A uniform high-strength,...

ASTM C1244/C1244M-20(2025) - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
April 1, 2025 - ASTM International

1.1 This test method covers procedures for testing precast concrete manhole sections when using the vacuum test method to demonstrate the integrity of the installed materials and the construction procedures. This test method is used for testing concrete manhole sections utilizing...

ASTM F2414-04(2016) - Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
April 1, 2016 - ASTM International

1.1 This practice covers proposed selection of materials, installation techniques, and inspection required for sealing manholes using chemical grout. Manholes or sections of manholes with active leaks shall be repaired. Manholes to be grouted are of brick, block,...

ASTM F2414-04(2009) - Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
May 1, 2009 - ASTM International

1.1 This practice covers proposed selection of materials, installation techniques, and inspection required for sealing manholes using chemical grout. Manholes or sections of manholes with active leaks shall be repaired. Manholes to be grouted are of brick, block,...

ASTM F2414-04 - Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
December 1, 2004 - ASTM International

1.1 This practice covers proposed selection of materials, installation techniques, and inspection required for sealing manholes using chemical grout. Manholes or sections of manholes with active leaks shall be repaired. Manholes to be grouted are of brick, block,...

ASTM C32-23 - Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
June 1, 2023 - ASTM International

This specification covers brick intended for use in drainage structures for the conveyance of sewage, industrial wastes, and storm water, and related structures such as manholes and catch basins. The bricks are classified as sewer bricks (Grades SS and SM) and manhole bricks...

ASTM F2551-09(2016) - Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
April 1, 2016 - ASTM International

1.1 This specification describes all the work required to structurally reinforce, seal, and protect sanitary sewer manholes. Applications include applying a prepackaged cementitious liner that can function as a full depth restoration or a partial depth repair. A uniform high-strength,...

ASTM C1244/C1244M-20 - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
November 1, 2020 - ASTM International

1.1 This test method covers procedures for testing precast concrete manhole sections when using the vacuum test method to demonstrate the integrity of the installed materials and the construction procedures. This test method is used for testing concrete manhole sections utilizing...

ASTM C1244/C1244M - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
November 1, 2020 - ASTM

This test method covers procedures for testing precast concrete manhole sections when using the vacuum test method to demonstrate the integrity of the installed materials and the construction procedures. This test method is used for testing concrete manhole sections utilizing mortar,...

ASTM C969-24 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines and Manholes
September 1, 2024 - ASTM International

1.1 This practice covers procedures for testing installed precast concrete pipe sewer lines and manholes using either water infiltration or exfiltration acceptance limits to demonstrate the integrity of the installed materials and construction procedure. 1.2 This practice is the...

ASTM F2414 - Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
December 1, 2004 - ASTM

This practice covers proposed selection of materials, installation techniques, and inspection required for sealing manholes using chemical grout. Manholes or sections of manholes with active leaks shall be repaired. Manholes to be grouted are of brick, block,...

ASTM C478/C478M-26 - Standard Specification for Circular Precast Reinforced Concrete Manhole Sections
May 15, 2026 - ASTM International

This specification covers the manufacture and purchase requirements of products used for the assembly and construction of circular vertical precast reinforced concrete manholes and structures used in sewer and water works. Reinforced concrete shall consist of cementitious materials,...

ASTM F2551 - Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
May 1, 2009 - ASTM

This specification describes all the work required to structurally reinforce, seal, and protect sanitary sewer manholes. Applications include applying a prepackaged cementitious liner that can function as a full depth restoration or a partial depth repair. A uniform high-strength,...

ASTM F2551-09 - Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
May 1, 2009 - ASTM International

1.1 This specification describes all the work required to structurally reinforce, seal, and protect sanitary sewer manholes. Applications include applying a prepackaged cementitious liner that can function as a full depth restoration or a partial depth repair. A uniform high-strength,...

ASTM D3753-25 - Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
December 1, 2025 - ASTM International

This specification covers glass fiber-reinforced polyester manholes and wetwells for use primarily in sanitary and storm sewer applications. Manhole and wetwell cylinders, manway reducers, and connectors shall be produced from glass fiber-reinforced polyester resin with...

ASTM C1244-11(2017) - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
April 1, 2017 - ASTM International

1.1 This test method covers procedures for testing precast concrete manhole sections when using the vacuum test method to demonstrate the integrity of the installed materials and the construction procedures. This test method is used for testing concrete manhole sections utilizing...

ASTM C1244M-11(2017) - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric) (Withdrawn 2020)
April 1, 2017 - ASTM International

1.1 This test method covers procedures for testing precast concrete manhole sections when using the vacuum test method to demonstrate the integrity of the installed materials and the construction procedures. This test method is used for testing concrete manhole sections utilizing...

ASTM F3080-21(2026) - Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
June 1, 2026 - ASTM International

1.1 Laser profiling is a non-contact inspection method used to create a pipe wall profile and internal measurement using a standard CCTV pipe inspection system, 360° laser light projector, a measurement by means of infrared sensors and geometrical profiling software. This practice covers the...

Advertisement