loading
ASTM SHEETMETAL - Mechanics Modeling of Sheet Metal Forming
January 1, 2007 - ASTM

Preface Beverage cans and many parts in aircraft, appliances, and automobiles are made of thin sheet metals formed by stamping operations at room temperature. Thus, sheet metal forming processes play an important role in mass production. Conventionally, the forming...

SMACNA SHEET METAL WRK CD - Standard Practice in Sheet Metal Work
January 1, 2012 - SMACNA
A description is not available for this item.
SMACNA SHEET METAL WELD - SHEET METAL WELDING GUIDE
January 1, 2007 - SMACNA

INTRODUCTION BACKGROUND The Sheet Metal and Air Conditioning Contractors' National Association, Inc. (SMACNA) has found that joining metal by welding is one of the most labor−intense operations in the sheet metal industry. Predicting and controlling the costs and...

API REPORT BENDING MOMENT - Bending Moment Capacity Calculations for Special API Clamp/Hub Combinations
September 1, 1983 - API

I. INTRODUCTION A study was performed to provide bending moment ratings as a function of internal pressure for five API clamp-hub combinations and for a heavy duty 18 3/4-10 connector, designed to withstand a one million ft·lb bending moment at working pressure. The design of the...

DIN 55805 - SHEET METAL BENDING ROLLS
DIN
A description is not available for this item.
MPIF METAL MATRIX - Metal Matrix Composites
January 1, 2006 - MPIF
A description is not available for this item.
MPIF METALLOGRAPHIC ETCH - Metallographic Etching
January 1, 1999 - MPIF
A description is not available for this item.
MPIF METALS HANDBOOK - Metals Handbook
January 1, 1998 - MPIF
A description is not available for this item.
MPIF METALLOGRAPHY PRINCI - Metallography Principles and Practice
January 1, 1984 - MPIF
A description is not available for this item.
MPIF METALS ALLOYS - PARTICLE STRENGTHENING OF METALS AND ALLOYS
MPIF
A description is not available for this item.
MPIF METAL INJECTION - PART 19 - METAL INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF METAL VOLUME 4 - METAL AND CERAMIC INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF METALLURGY - POWDER METALLURGY SCIENCE
MPIF
A description is not available for this item.
MPIF METALLOGRAPHIC ATLAS - METALLOGRAPHIC ATLAS OF POWDER METALLURGY
MPIF
A description is not available for this item.
ICBO SHEET STEEL - ANSI/AWS D1.3-98, STRUCTURAL WELDING CODE-SHEET STEEL
ICBO
A description is not available for this item.
MBMA METAL BUILDING MNL - METAL BUILDING SYSTEMS MANUAL
MBMA
A description is not available for this item.
ASTM B551/B551M-26 - Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
April 1, 2026 - ASTM International

1.1 This specification covers five grades of zirconium strip, sheet, and plate. 1.2 Unless a single unit is used, for example corrosion mass gain in mg/dm2, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not...

ASTM B1021-21(2026) - Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
April 1, 2026 - ASTM International

5.1 Use this test method for acceptance and process control testing. This test method may be used as an alternative to Test Method D1876 when the bond strength is sufficiently high that failure of the pulling tabs may occur before peeling initiates. This test method extends the bond strength...

ASTM A463/A463M-25b - Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
December 1, 2025 - ASTM International

This specification covers aluminum-coated steel sheet in coils and cut lengths available with two types of aluminum coating applied by the hot-dip process, with several coating weights. The heat analysis of the base metal shall conform to the requirements specified. Structural steel...

ASTM A1046/A1046M-25a - Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
December 1, 2025 - ASTM International

This specification covers steel sheet in coils and cut lengths coated with zinc-aluminum-magnesium alloy by hot-dip process intended for applications requiring corrosion resistance and paintability. The steel sheet shall be produced in the following designations: commercial steel (CS...

Advertisement