loading
ASTM SHEETMETAL - Mechanics Modeling of Sheet Metal Forming
January 1, 2007 - ASTM

Preface Beverage cans and many parts in aircraft, appliances, and automobiles are made of thin sheet metals formed by stamping operations at room temperature. Thus, sheet metal forming processes play an important role in mass production. Conventionally, the forming...

SMACNA SHEET METAL WELD - SHEET METAL WELDING GUIDE
January 1, 2007 - SMACNA

INTRODUCTION BACKGROUND The Sheet Metal and Air Conditioning Contractors' National Association, Inc. (SMACNA) has found that joining metal by welding is one of the most labor−intense operations in the sheet metal industry. Predicting and controlling the costs and...

SMACNA SHEET METAL WRK CD - Standard Practice in Sheet Metal Work
January 1, 2012 - SMACNA
A description is not available for this item.
SMACNA RES SHEET METAL - Residential Sheet Metal Guidelines
December 1, 2001 - SMACNA

FOREWORD As housing construction grows more complex, and the building business becomes more involved, SMACNA recognizes the need for a reference on the proper fabrication and installation of exterior sheet metals in residential buildings. The first edition of the Residential...

SMACNA ACCEPTED METAL - Accepted Industry Practices for Sheet Metal Lagging
July 1, 2002 - SMACNA

This document contains accepted practices for the fabrication and installation of sheet metal lagging. This document serves to establish standard methods to fabricate and install sheet metal lagging systems. This document does notprovide designs nor does it address...

SMACNA ACCEPTED METAL CD - ACCEPTED INDUSTRY PRACTICES FOR SHEET METAL LAGGING
SMACNA
A description is not available for this item.
ASTM B793-16(2026) - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
April 1, 2026 - ASTM International

This specification covers the standard requirements for commercial zinc casting alloys in ingot form for use in the manufacture of sheet metal forming dies, sand cast or plaster cast forming dies, and plastic injection molds. Kirksite A alloy (UNS Z35543) is intended for use in the...

ASTM B916-01(2026) - Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
May 1, 2026 - ASTM International

1.1 The scope of this test method is: 1.1.1 To determine quantitatively the amount of enamel remaining after the porcelain enamel coating specimen has been deformed; 1.1.2 To standardize the deformation parameters for testing adherence of porcelain enamel to sheet metal; and, 1.1.3 To...

ASTM E1592-25 - Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
August 1, 2025 - ASTM International

1.1 This test method covers the evaluation of the structural performance of sheet metal panels and anchor-to-panel attachments for roof or siding systems under uniform static air pressure differences using a test chamber or support surface. 1.2 The provisions of this test method are...

ASTM E517-24 - Standard Test Method for Plastic Strain Ratio r for Sheet Metal
March 1, 2024 - ASTM International

4.1 The plastic strain ratio r is a parameter that indicates the ability of a sheet metal to resist thinning or thickening when subjected to either tensile or compressive forces in the plane of the sheet. It is a measure of plastic anisotropy and is related to the preferred...

UFGS-07 60 00 - FLASHING AND SHEET METAL
May 1, 2017 - NAVY

NOTE: This guide specification covers the requirements for flashing and sheet metal work including gutters and downspouts, scuppers, splash pans, and sheet metal roofing.

D9.1M/D9.1:2018 - Sheet metal Welding Code
January 1, 2018 - AWS

This code covers the arc and braze welding requirements for nonstructural sheet metal fabrications using the commonly welded metals available in sheet form. Requirements and limitations governing procedure and performance qualification are presented, and workmanship and...

GMW15356 - Sheet Metal Rating Scale
September 1, 2019 - GMW

Purpose. The purpose of the rating scale is to allow comparison between vehicles and consistency between personnel. It is important to recognize that rating corrosion involves perception of an objectionable surface and much of the judgment is subjective. In developing the corrosion scales, some...

JIS METAL SURFACE HDBK - Metal Surface Treatment Handbook
January 1, 2020 - JSA
A description is not available for this item.
API STD 610 DATA SHEET - Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
January 1, 2021 - API
A description is not available for this item.
JIS METAL ANALYSIS I HDBK - JIS Metal Analysis I - Ferrous Handbook
January 1, 2019 - JSA
A description is not available for this item.
JIS METAL ANALYSIS II - JIS Metal Analysis II – Non-Ferrous Handbook
January 1, 2019 - JSA
A description is not available for this item.
Advertisement