loading
ASTM D5032-19(2026) - Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
June 1, 2026 - ASTM International

4.1 Controlled relative humidity environments are important for conditioning materials for shelf-life studies or for investigating the change in physical or dielectric properties after exposure. 4.2 The use of aqueous-glycerin solutions reduces the possibility of contamination of the...

ASTM D7694/D7694M-18(2026) - Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material
May 1, 2026 - ASTM International

3.1 These test methods are used to evaluate the properties of self-adhesive modified bituminous membranes. The results determine compliance with the applicable specifications, or they can be used for comparative analysis. 3.2 The test methods apply to "as manufactured" material and may not apply to...

ASTM F1671/F1671M-26 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
July 1, 2026 - ASTM International

5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...

ASTM F493-22(2026) - Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
April 1, 2026 - ASTM International

This specification covers requirements for solvent cements for chlorinated poly(vinyl chloride) (CPVC) plastic pipe, tubing, and socket-type fittings. Solvent cement shall be a CPVC resin-based solution, shall be free-flowing, shall show no gelation or stratification, and shall not contain lumps or...

ASTM D8272-19(2026) - Standard Guide for Development and Optimization of D19 Chemical Analysis Methods Intended for EPA Compliance Reporting
May 1, 2026 - ASTM International

4.1 The ASTM guidance manual, Form and Style for ASTM Standards, Section A21, requires a precision and bias statement in all ASTM test methods. Section A21.2.2 states: Precision shall be estimated in accordance with the interlaboratory test program prescribed in Practice E691, Conducting an...

ASTM F3833-26 - Standard Guide for Computer Based Control Systems (CBCS)
May 1, 2026 - ASTM International

1.1 This guide defines the system-level behaviors for computer-based control of major, hazardous, and catastrophic failure conditions. The approaches identified provide behaviors intended to implement the necessary and sufficient controls for each specific failure condition being controlled. These...

ASTM D5267-97(2026) - Standard Test Method for Determination of Extrudability of Cartridge Adhesives
January 1, 2026 - ASTM International

4.1 Cartridge adhesives are typically used at job sites in a wide variety of temperature ranges. These products may be exposed to cold temperatures, where one of the limiting application factors is whether the product can be extruded from the cartridge. 4.2 The test method quantitatively measures...

ASTM D8089-17(2026) - Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
January 1, 2026 - ASTM International

4.1 The final appearance of an installed floor depends upon several factors. These include but are not limited to the manufacture of the flooring material, the preparation of the subfloor and the skill of the installer. This practice is used to measure the ability of the adhesive to retain its...

ASTM F1104-02(2025) - Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
November 1, 2025 - ASTM International

4.1 This test method determines the procedure to be used to ensure the long term storage stability of aircraft cleaning and maintenance products, in order to ensure their ability to meet the shelf-life requirements called up in specifications or contract documents. The subsequent testing...

ASTM F1105-09(2025) - Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
November 1, 2025 - ASTM International

4.1 This practice determines the procedure to be used to ensure the long-term storage stability of aircraft cleaning and maintenance products in order to ensure their ability to meet the shelf-life requirements called up in specifications or contract documents. The subsequent testing...

ASTM F1249-25 - Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
October 1, 2025 - ASTM International

5.1 The purpose of this test method is to obtain reliable values for the WVTR of plastic film and sheeting. 5.2 WVTR is an important property of packaging materials and can often be directly related to shelf life and packaged product stability. 5.3 Data from this test method is suitable as a...

ASTM F1306-21(2025) - Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
October 15, 2025 - ASTM International

4.1 Penetration resistance is an important end-use performance of thin flexible materials where a sharp-edged product can destroy the integrity of a barrier wrap. This will permit package entry/exit of gases, odors, and unwanted contaminates, causing potential harm to the product and reducing...

ASTM C1369-25 - Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
October 1, 2025 - ASTM International

This specification covers cold, liquid-applied, single or multi-component, chemically curing, elastomeric secondary edge sealants for sealed structurally glazed insulating glass units. Only the minimum acceptable test requirements for and the durability of these materials are described by this...

ASTM F1670/F1670M-25 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
December 1, 2025 - ASTM International

5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...

ASTM F3287-17(2025) - Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
October 1, 2025 - ASTM International

5.1 Leaks in medical, pharmaceutical, or food product packages can affect product quality and consumer safety. Such leaks can arise from imperfections in package material or between mated components designed to seal the package. Defects can allow unwanted gas (for example, oxygen or water vapor),...

ASTM E1870-25 - Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
August 1, 2025 - ASTM International

1.1 This test method covers a recommended procedure for examining odor and taste properties of polymeric film intended for use as flexible packaging materials. This test method can be used for single (mono) layers, coextruded, and laminate materials. The focus of this test method is the evaluation...

ASTM E3337-25 - Standard Practice for Multiple-Attribute Temporal Sensory Methods
August 1, 2025 - ASTM International

1.1 This practice covers procedures for measurement of time-related (temporal) sensory perceptions of multiple attributes and events or exposures of products or other sensory stimuli. 1.2 The selection of an appropriate method will depend on the determination of the temporal parameters being...

ASTM F1193-25 - Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
June 15, 2025 - ASTM International

3.1 The purpose of this practice is to provide the minimum manufacturing requirements for amusement rides and devices and to provide the minimum requirements for a written quality assurance program for an amusement ride or device manufacturer, or component supplier. 3.2 This practice is not...

Advertisement