loading
ASTM F2446-04(2026) - Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
April 1, 2026 - ASTM International

4.1 Capturing high quality RAM performance data requires careful and consistent collection of equipment failure and repair data, operating hours, and repair time. A standard hierarchy of equipment boundaries has been needed for machinery data exchange among the stakeholders in shipbuilding,...

ASTM F940-99(2025)e1 - Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
June 1, 2025 - ASTM International

5.1 This practice provides a means of assuring that products supplied during ship construction and maintenance are substantially the same as the materials on which the original selection was based. The selection of a paint for shipboard use frequently involves laboratory and field evaluations of...

ASTM F3059-24 - Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
September 15, 2024 - ASTM International

This specification provides the testing and performance requirements for fiber-reinforced polymer (FRP) gratings used in marine construction and shipbuilding to ensure personnel safety. It is intended for use by all persons designing, manufacturing, testing, inspecting, and maintaining FRP...

ASTM F1005-91(2024) - Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration
July 1, 2024 - ASTM International

1.1 This practice covers the identification of design configurations and descriptive nomenclature for sheetmetal HVAC ductwork shapes frequently used in shipbuilding. This practice also covers parametric dimensions of these shapes. (See Table 1.) 1.2 This practice does not cover the location...

ASTM F1835-97(2023) - Standard Guide for Cable Splicing Installations
December 1, 2023 - ASTM International

4.1 Splicing of cables in the shipbuilding industry, both in Navy and commercial undertakings, has been concentrated in repair, conversion, or overhaul programs. However, many commercial industries, including aerospace and nuclear power, have standards defining cable splicing methods and...

ASTM F2016-23 - Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
May 1, 2023 - ASTM International

1.1 This practice consists of three annexes: hull structure, outfitting, and coating. The subject of these annexes was selected for several reasons. Other commercial shipbuilding nations already have in place widely recognized standards of expectations in these areas. These constitute the...

JIS F 7427 - Shipbuilding -- Bronze valves
January 20, 2021 - JSA
A description is not available for this item.
JIS F 7426 - Shipbuilding -- Cast steel valves
January 20, 2021 - JSA
A description is not available for this item.
JIS F 2317 - Shipbuilding -- Ullage holes
January 20, 2021 - JSA
A description is not available for this item.
JIS F 7425 - Shipbuilding -- Cast iron valves
January 20, 2021 - JSA
A description is not available for this item.
JIS F 8523 - Shipbuilding -- Electric engine telegraphs
January 20, 2021 - JSA
A description is not available for this item.
JIS F 2025 - Shipbuilding -- Cable clenchies
January 20, 2021 - JSA
A description is not available for this item.
JIS F 7218 - Shipbuilding -- Cylindrical sight glasses
September 23, 2020 - JSA
A description is not available for this item.
JIS F 7201 - Shipbuilding -- Application of strainers
September 23, 2020 - JSA
A description is not available for this item.
JIS F 7505 - Shipbuilding -- Spheroidal graphite iron (ductile iron) valves
January 20, 2021 - JSA
A description is not available for this item.
DEFCON 663 - SHIPBUILDING INDEMNITY
December 1, 2017 - MODUK

Definitions 1. In this Condition, the following terms shall have the following meanings: a. "Affiliate" means, in relation to the Contractor, any holding company or subsidiary or any subsidiary of that holding company, where "holding company" and "subsidiary" have the meanings given in section 1159...

JIS F 7215 - Shipbuilding -- Flat glass oil level gauges
September 23, 2020 - JSA
A description is not available for this item.
JIS F 7213 - Shipbuilding -- 16K water gauges with valves
September 23, 2020 - JSA
A description is not available for this item.
JIS F 3057 - Shipbuilding -- Vertical storm valves for ships
September 23, 2020 - JSA
A description is not available for this item.
Ventilation of Normobaric and Hyperbaric Objects
March 23, 2021 - CRC

Considering the increased need to test and develop ventilation both for normobaric and hyperbaric use in underwater technology industries (diving equipment, submarines and other underwater facilities), mining, and other relevant industries, this book presents a complete study in the field of...

Advertisement