loading
ASTM C267-20(2026) - Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
June 1, 2026 - ASTM International

1.1 These test methods are intended to evaluate the chemical resistance of resin, silica, silicate, sulfur, and hydraulic materials, grouts, monolithic surfacings, and polymer concretes under anticipated service conditions. These test methods provide for the determination of changes in the...

ASTM C1778-25 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
December 15, 2025 - ASTM International

1.1 This guide provides guidance on how to address the potential for deleterious alkali aggregate reaction (AAR) in concrete construction. This guide addresses the process of identifying both potentially alkali-silica reactive (ASR) and alkali-carbonate reactive (ACR) aggregates through...

ASTM C1600/C1600M-25 - Standard Specification for Rapid Hardening Hydraulic Cement
October 1, 2025 - ASTM International

This specification covers performance requirements for rapid hardening hydraulic cements. There are no restrictions on the compositions of the cement or its constituents. The specification classifies cements by type based on specific requirements for very early compressive strength development. The...

ASTM C55-25 - Standard Specification for Dry-Cast Concrete Building Brick
July 1, 2025 - ASTM International

This specification covers solid, dry-cast, concrete building brick intended for interior and exterior use in constructing structural masonry, and are made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Materials to be used in the...

ASTM E1132-21 - Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
November 1, 2021 - ASTM International

4.1 These practices and criteria were developed for occupational exposures. They are intended to (1) protect against clinical disease from exposure to respirable crystalline silica, (2) be measurable by techniques that are valid, reproducible, and readily available, and (3) be...

ASTM C1600/C1600M-24 - Standard Specification for Rapid Hardening Hydraulic Cement
December 15, 2024 - ASTM International

This specification covers performance requirements for rapid hardening hydraulic cements. There are no restrictions on the compositions of the cement or its constituents. The specification classifies cements by type based on specific requirements for very early compressive strength development. The...

ASTM D7723-24 - Standard Test Method for Rubber Property—Macro-Dispersion of Fillers in Compounds
May 1, 2024 - ASTM International

5.1 The incorporation of fillers into the rubber matrix is characterized by their macro-dispersion as an indicator of the quality of mixing. This test method provides a measure of the macro-dispersion of reinforcing fillers, like silica and carbon black, as well as of inert fillers. Based on...

ASTM C1293/C1293M-23a - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
December 1, 2023 - ASTM International

4.1 Alkali-silica reaction is a chemical interaction between some siliceous constituents of concrete aggregates and hydroxyl ions (1).5 The concentration of hydroxyl ion within the concrete is predominantly controlled by the concentration of sodium and potassium (2). 4.2 This test method is...

ASTM C1293/C1293M-23ae1 - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
December 1, 2023 - ASTM International

4.1 Alkali-silica reaction is a chemical interaction between some siliceous constituents of concrete aggregates and hydroxyl ions (1).5 The concentration of hydroxyl ion within the concrete is predominantly controlled by the concentration of sodium and potassium (2). 4.2 This test method is...

ASTM C25-24 - Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
June 1, 2024 - ASTM International

4.1 These test methods provide accurate and reliable analytical procedures to determine the chemical constituents of limestone, quicklime, and hydrated lime (see Note 1). The percentages of specific constituents which determine a material's quality or fitness for use are of significance depending...

ASTM C1293/C1293M-23 - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
November 1, 2023 - ASTM International

4.1 Alkali-silica reaction is a chemical interaction between some siliceous constituents of concrete aggregates and hydroxyl ions (1).5 The concentration of hydroxyl ion within the concrete is predominantly controlled by the concentration of sodium and potassium (2). 4.2 This test method is...

ASTM C1778-23 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
December 1, 2023 - ASTM International

1.1 This guide provides guidance on how to address the potential for deleterious alkali aggregate reaction (AAR) in concrete construction. This guide addresses the process of identifying both potentially alkali-silica reactive (ASR) and alkali-carbonate reactive (ACR) aggregates through...

ASTM E2625-19 - Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
August 15, 2019 - ASTM International

4.1 These practices and criteria were developed for occupational exposures during construction and demolition activities. They are intended to (1) protect against clinically significant disease from exposure to respirable crystalline silica, (2) be measurable by techniques that...

ASTM E2625 - Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
August 15, 2019 - ASTM

This practice describes several actions to reduce the risk of harmful occupational exposures in environments containing respirable crystalline silica. This practice is intended for the unique conditions during construction and demolition activities. Health requirements relating to...

ASTM C55-23 - Standard Specification for Concrete Building Brick
December 1, 2023 - ASTM International

1.1 This specification covers solid, dry-cast, concrete building brick intended for interior and exterior use in constructing structural masonry, and are made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: Specification C1634...

ASTM C1600/C1600M-23 - Standard Specification for Rapid Hardening Hydraulic Cement
June 15, 2023 - ASTM International

This specification covers performance requirements for rapid hardening hydraulic cements. There are no restrictions on the compositions of the cement or its constituents. The specification classifies cements by type based on specific requirements for very early compressive strength development. The...

ASTM E2625-09(2017) - Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
November 1, 2017 - ASTM International

3.1 These practices and criteria were developed for occupational exposures during construction and demolition activities. They are intended to (a) protect against clinically significant disease from exposure to respirable crystalline silica, (b) be measurable by techniques that...

ASTM D7258-23 - Standard Specification for Polymeric Piles
February 1, 2023 - ASTM International

1.1 This specification addresses the use of round and rectangular cross-section polymeric piles in axial and lateral load-bearing applications, including but not limited to marine, waterfront, and corrosive environments. 1.2 This specification is only applicable to individual polymeric pile...

ASTM C55-22 - Standard Specification for Concrete Building Brick
December 15, 2022 - ASTM International

1.1 This specification covers solid, dry-cast, concrete building brick intended for interior and exterior use in constructing structural masonry, and are made from portland cement, water, and suitable mineral aggregates with or without the inclusion of other materials. Note 1: Specification C1634...

Advertisement