5.1 This test method is used to measure viscoelastic properties through the strain softening effects of a strain amplitude sweep (the Payne Effect). 5.2 For the uncured state, the time conditioning and strain amplitude strain sweeps can relate to colloidal silica particle or carbon...
1.1 This specification covers the minerology, specific gravity, and particle size distributions (PSDs) of silica-based sediments to be used in the laboratory performance testing of stormwater treatment devices as well as criteria defining acceptable error for the target PSDs. 1...
These test methods cover the estimation of the average particle size in micrometres of alumina and silica powders using an air permeability method. The test methods are intended to apply to the testing of alumina and silica powders in the particle size...
1.1 These test methods cover the estimation of the average particle size in micrometres of alumina and silica powders using an air permeability method. The test methods are intended to apply to the testing of alumina and silica powders in the particle size...
3.1 Sieve analyses are carried out to determine the particle size distribution of powders which, in turn, are used to qualify those materials as to their usefulness in the process under consideration. Since particle size analyses have only relative significance, the...
4.1 This practice provides criteria for the verification of the silica sediment removal efficiency of hydrodynamic separators. 4.2 Verification can be used to support certification of the technology within different AHJs provided that: 4.2.1 HDS units are sized using the resulting...
1.1 This specification covers the minerology, specific gravity, and particle size distributions (PSDs) of silica-based sediments to be used in the laboratory performance testing of stormwater treatment devices as well as criteria defining acceptable error for the target PSDs. 1...
5.1 This test method is used to measure viscoelastic properties through the strain softening effects of a strain amplitude sweep (the Payne Effect). 5.2 For the uncured state, the time conditioning and strain amplitude strain sweeps can relate to colloidal silica particle or carbon...
1.1 These test methods cover the estimation of the average particle size in micrometres of alumina and silica powders using an air permeability method. The test methods are intended to apply to the testing of alumina and silica powders in the particle size...
4.1 This practice provides criteria for the verification of the silica sediment removal efficiency of hydrodynamic separators. 4.2 Verification can be used to support certification of the technology within different AHJs provided that: 4.2.1 HDS units are sized using the resulting...
1.1 These test methods cover procedures for the sampling and chemical analysis of inorganic alkaline detergents. 1.2 The procedures appear in the following order: Sections Caustic Soda: ?Sampling 5 ?Total Alkalinity as Sodium Oxide (Na2O) 6 - 8 ?Sodium Hydroxide (NaOH) ?9 - 11 ?Carbonate as Sodium...
This document specifies the requirements and choice of test method for the determination of the size-weighted fine fraction (SWFF) and the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials. This document gives also guidance on the preparation of the...
Narrow Your Results