This Japanese Industrial Standard specifies molding silica sand of clay content less than 2 % in mass fraction (hereafter referred to as "silica sand").
1. SCOPE: The material desired under this standard is one grade of silica sand (rounded grains), washed and dried.
This Standard describes a silica sand with round to sub-angular grains supplied in the wet condition.
This Standard defines a silica sand with round to sub-angular grains supplied in the wet condition.
The material defined by this Standard is a coarse sub-angular grain silica sand received in an unwashed condition.
This Standard defines a silica sand with round to sub-angular grains supplied in the washed and dried condition.
This Standard describes a silica sand with round to sub angular grains, received in the wet condition.
The material defined by this standard is medium size, rounded grain Silica sand, acid washed, graded and dried.
1 . SCOPE The materiel defined by this Standard is a fine size rouncied grain Silica Sand, acid washrid, graded and dried.
1. SCOPE: The material defined by this standard is a medium fine sub-angular grain Silica sand received in a washed and dried condition.
The material defined by this standard is a medium coarse size subangular grain, Silica sand supplied in a washed and dried condition.
SCOPE This materials defined by this Standard are rounded grain silica sands coated with resin.
This document is applicable to silica sand and silica gravel used for treatment of water intended for human consumption. It describes the characteristics of silica sand and silica gravel and specifies the requirements and the corresponding test methods for...
This part of EN ISO 3262 specifies the requirements and the corresponding methods of test for silica sand ( unground natural quartz).
1.1 This practice is used to identify cationic emulsified asphalts. Positively charged particles are classified as cationic. Emulsified asphalts that don't register a positive charge may also be classified as cationic slow-setting if they coat a specific type of negatively charged silica...
1. SCOPE: The material defined by this Standard is a fine grade of silica sand.
1.1 These test methods cover the chemical analysis of glass sands. They are useful for either high-silica sands (99?%+?silica (SiO2)) or for high-alumina sands containing as much as 12?% to 13?% alumina (Al2O3). Generally nonclassical, these test methods are rapid and accurate. They...
This practice covers a cleaning and de-scaling procedure useful to producers, users, and fabricators of zirconium and zirconium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. Grease,...
Narrow Your Results