loading
ASTM D8059-26 - Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
June 1, 2026 - ASTM International

1.1 This test method covers the use of a sealed cavity rotorless oscillating shear rheometer for the measurement of the softening effects of rising sinusoidal strain when applied to an unvulcanized rubber compound containing significant amounts of colloidal fillers (such as silica or carbon...

ASTM C267-20(2026) - Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
June 1, 2026 - ASTM International

1.1 These test methods are intended to evaluate the chemical resistance of resin, silica, silicate, sulfur, and hydraulic materials, grouts, monolithic surfacings, and polymer concretes under anticipated service conditions. These test methods provide for the determination of changes in the...

ASTM E3317-25 - Standard Specification for Silica-Based Sediments for the Evaluation of Stormwater Treatment Devices
August 15, 2025 - ASTM International

1.1 This specification covers the minerology, specific gravity, and particle size distributions (PSDs) of silica-based sediments to be used in the laboratory performance testing of stormwater treatment devices as well as criteria defining acceptable error for the target PSDs. 1.2...

ASTM C1778-25 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
December 15, 2025 - ASTM International

1.1 This guide provides guidance on how to address the potential for deleterious alkali aggregate reaction (AAR) in concrete construction. This guide addresses the process of identifying both potentially alkali-silica reactive (ASR) and alkali-carbonate reactive (ACR) aggregates through...

ASTM E2914/E2914M-25 - Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
August 1, 2025 - ASTM International

1.1 This practice covers the extraction of lead (Pb) using ultrasonication, heat and nitric acid from a composited sample of up to four individual wipe samples of settled dust collected from equally-sized areas in the same space. 1.2 This practice contains notes which are explanatory and not...

ASTM E2913/E2913M-25 - Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
August 1, 2025 - ASTM International

1.1 This practice is similar to Practice E1644 and covers the hot, nitric acid digestion of lead (Pb) from a composited sample of up to four individual wipe samples of settled dust collected from equally-sized areas in the same space. 1.2 This practice contains notes which are explanatory...

ISO 20927 - Rubber compounding ingredients — Precipitated silica — Determination of aggregate size distribution by disc centrifuge
October 1, 2019 - ISO

This document specifies a general method for determining the aggregate size distribution (ASD) of silica by using a disc centrifuge according to the principle of sedimentation. As pre-stage the silica is de-agglomerated in water using strong ultrasonic power treatment. The...

ASTM C1893-24 - Standard Practice for Laboratory Performance Verification of Hydrodynamic Separators for the Treatment of Stormwater Runoff
March 1, 2024 - ASTM International

4.1 This practice provides criteria for the verification of the silica sediment removal efficiency of hydrodynamic separators. 4.2 Verification can be used to support certification of the technology within different AHJs provided that: 4.2.1 HDS units are sized using the resulting...

ASTM C1293/C1293M-23a - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
December 1, 2023 - ASTM International

4.1 Alkali-silica reaction is a chemical interaction between some siliceous constituents of concrete aggregates and hydroxyl ions (1).5 The concentration of hydroxyl ion within the concrete is predominantly controlled by the concentration of sodium and potassium (2). 4.2 This test method is...

ASTM C1293/C1293M-23ae1 - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
December 1, 2023 - ASTM International

4.1 Alkali-silica reaction is a chemical interaction between some siliceous constituents of concrete aggregates and hydroxyl ions (1).5 The concentration of hydroxyl ion within the concrete is predominantly controlled by the concentration of sodium and potassium (2). 4.2 This test method is...

ASTM C721 - Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
September 1, 2020 - ASTM

These test methods cover the estimation of the average particle size in micrometres of alumina and silica powders using an air permeability method. The test methods are intended to apply to the testing of alumina and silica powders in the particle size range from 0.2 to...

ASTM C721-20 - Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
September 1, 2020 - ASTM International

1.1 These test methods cover the estimation of the average particle size in micrometres of alumina and silica powders using an air permeability method. The test methods are intended to apply to the testing of alumina and silica powders in the particle size range from 0.2...

ASTM C1293/C1293M-23 - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
November 1, 2023 - ASTM International

4.1 Alkali-silica reaction is a chemical interaction between some siliceous constituents of concrete aggregates and hydroxyl ions (1).5 The concentration of hydroxyl ion within the concrete is predominantly controlled by the concentration of sodium and potassium (2). 4.2 This test method is...

DS/EN 17289-3 - Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 3: Sedimentation method
January 4, 2021 - DS

This document specifies the determination of the size-weighted fine fraction (SWFF) and the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials by means of a sedimentation method using a liquid sedimentation technique. The purpose of this document is to...

ASTM C371-09(2024) - Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
February 1, 2024 - ASTM International

3.1 Sieve analyses are carried out to determine the particle size distribution of powders which, in turn, are used to qualify those materials as to their usefulness in the process under consideration. Since particle size analyses have only relative significance, the results should be...

DS/EN 17289-2 - Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 2: Calculation method
January 4, 2021 - DS

This document specifies the determination of the size-weighted fine fraction (SWFF) and the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials by calculation. The document also specifies the assumptions and preconditions to be fulfilled for this method...

ASTM C311/C311M-24 - Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete
January 1, 2024 - ASTM International

1.1 These test methods cover procedures for sampling and testing coal ash and raw or calcined pozzolans for use in concrete. 1.2 The procedures appear in the following order: Sections Sampling 7 CHEMICAL ANALYSIS Reagents and apparatus 10 Moisture content 11 and 12 Loss on ignition 13 and 14...

DS/EN 17289-1 - Characterization of bulk materials – Determination of a size-weighted fine fraction and crystalline silica content – Part 1: General information and choice of test methods
January 4, 2021 - DS

This document specifies the requirements and choice of test method for the determination of the size-weighted fine fraction (SWFF) and the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials. This document gives also guidance on the preparation of the...

ASTM C1778-23 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
December 1, 2023 - ASTM International

1.1 This guide provides guidance on how to address the potential for deleterious alkali aggregate reaction (AAR) in concrete construction. This guide addresses the process of identifying both potentially alkali-silica reactive (ASR) and alkali-carbonate reactive (ACR) aggregates through...

Advertisement