loading
ASTM D8471-22a(2026) - Standard Practice for Silica—Reference Compound
July 1, 2026 - ASTM International

5.1 This practice may be used to characterize silica or silane in terms of specific properties of the standard compound. This practice is useful for the quality assurance of silica production. It may also be used for the preparation of reference compounds for compounding experiments,...

ASTM D8016-22(2026) - Standard Test Method for Silica, Precipitated, Hydrated—Sears Number
July 1, 2026 - ASTM International

1.1 This test method is used to determine the number of silanol groups on the surface of silica by titration according to a method as developed by Sears. This test method is suitable for characterizing rubber-grade silicas. 1.2 Units-The values stated in SI units are to be regarded as...

ASTM D1993-22(2026) - Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
July 1, 2026 - ASTM International

3.1 This test method is used to measure the surface area of precipitated, hydrated silicas that is available to the nitrogen molecule using the multipoint (B. E. T.) method. Single point nitrogen surface area is measured in accordance with the Test Methods D5604. 3.2 Solids adsorb nitrogen,...

ASTM D8671-26 - Standard Guide for Determination of Silica and Alumina Molar Ratio in Zeolites by Inductively Coupled Plasma Optical Emission Spectroscopy
June 1, 2026 - ASTM International

1.1 This guide covers the analysis of silicon and aluminum in zeolite by Inductive Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Zeolite samples in powdered form are ultrasonicated with mineral acid mixture (hydrochloric acid and hydrofluoric acid). Zeolite silica and alumina molar...

ASTM C146-26 - Standard Test Methods for Chemical Analysis of Glass Sand
July 1, 2026 - ASTM International

1.1 These test methods cover the chemical analysis of glass sands. They are useful for either high-silica sands (99?%+?silica (SiO2)) or for high-alumina sands containing as much as 12?% to 13?% alumina (Al2O3). Generally nonclassical, these test methods are rapid and accurate. They...

ASTM D8059-26 - Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
June 1, 2026 - ASTM International

1.1 This test method covers the use of a sealed cavity rotorless oscillating shear rheometer for the measurement of the softening effects of rising sinusoidal strain when applied to an unvulcanized rubber compound containing significant amounts of colloidal fillers (such as silica or carbon...

ASTM C1274-12(2026) - Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
July 15, 2026 - ASTM International

1.1 This test method covers the determination of the surface area of advanced ceramic materials (in a solid form) based on multilayer physisorption of gas in accordance with the method of Brunauer, Emmett, and Teller (BET) (1) and based on IUPAC Recommendations (1984 and 1994) (2, 3). This test...

ASTM D8362-21(2026) - Standard Test Method for Rubber—Determination of the Degree of Silanization by Dynamic Strain Softening
April 1, 2026 - ASTM International

1.1 This test method is used to rheologically determine the degree of silanization in a silica filled compound. Silanization is the chemical reaction related to covering the silica surface with organosilanes for a better incorporation of silica into rubber. Bifunctional silanes...

ASTM C267-20(2026) - Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
June 1, 2026 - ASTM International

1.1 These test methods are intended to evaluate the chemical resistance of resin, silica, silicate, sulfur, and hydraulic materials, grouts, monolithic surfacings, and polymer concretes under anticipated service conditions. These test methods provide for the determination of changes in the...

ASTM D7402-26 - Standard Practice for Identifying Cationic Emulsified Asphalts
May 1, 2026 - ASTM International

1.1 This practice is used to identify cationic emulsified asphalts. Positively charged particles are classified as cationic. Emulsified asphalts that don't register a positive charge may also be classified as cationic slow-setting if they coat a specific type of negatively charged silica...

ASTM D8300-25 - Standard Test Method for Silica, Precipitated, Hydrated—Electrical Conductivity
November 1, 2025 - ASTM International

1.1 This test method is used to determine the electrical conductivity of silica and the electrical conductivity is suitable for characterizing rubber-grade silicas. 1.2 Units-The values stated in SI units are to be regarded as the standard. No other units of measurement are included...

ASTM D8641-25 - Standard Test Method for Silica, Pelleted, Granulated - Pour Density
November 1, 2025 - ASTM International

4.1 Pour density is a function of the degree of compaction of pellets or granulates of silica. Pour density of silica is useful for estimating the weight-to-volume relationship for certain applications, such as automatic batch loading systems, and for estimating weights of bulk...

ASTM D8642-25 - Standard Test Method for Silica, Pelleted, Granulated - Fines
November 1, 2025 - ASTM International

4.1 The fines content of silica is related to the bulk flowability, dustiness, and in some instances, the level of dispersion. Due to the many other variables that influence dispersion and handling, the significance of fines content must be determined by the user. 4.2 A similar test method...

ASTM D8643-25 - Standard Test Method for Silica, Pelleted, Granulated - Attrition
November 1, 2025 - ASTM International

1.1 This test method covers the determination of the attrition of pelleted or granulated silica. 1.2 Units-The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the...

ASTM D8404-26a - Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
April 1, 2026 - ASTM International

5.1 There is a need to monitor the content of metals and metalloids to determine the presence of potential hazards. Hence, effective and efficient methods are required for the preparation of soil samples for determination of metals and metalloids present therein. 5.2 This practice may be used for...

ASTM B614-26 - Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
April 1, 2026 - ASTM International

This practice covers a cleaning and de-scaling procedure useful to producers, users, and fabricators of zirconium and zirconium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. Grease,...

ASTM D3516-89(2026) - Standard Test Methods for Ashing Cellulose
February 1, 2026 - ASTM International

4.1 Ash content gives an estimation of the inorganic content of cellulose samples. The presence of high levels of ash can be expected to be detrimental to the process of making cellulose derivatives. It also provides a rough estimate of silica content which can have a significant effect on...

ASTM D8404-26 - Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
March 1, 2026 - ASTM International

5.1 There is a need to monitor the content of metals and metalloids to determine the presence of potential hazards. Hence, effective and efficient methods are required for the preparation of soil samples for determination of metals and metalloids present therein. 5.2 This practice may be used for...

ASTM D6739-20(2025) - Standard Test Method for Silica—pH Value
June 1, 2025 - ASTM International

1.1 This test method is used to measure the pH of a 5?% mass per volume (m/V) silica/water suspension or mechanical dispersion and is indicative of the relative acidity or alkalinity of the silica. 1.2 The values stated in SI units are to be regarded as standard. No other units of...

ASTM E247-25 - Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
October 1, 2025 - ASTM International

5.1 This test method is intended to be used for compliance with compositional specifications for silica content. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be...

Advertisement