loading
JIS MEDICAL DEVICES I - JIS Medical Devices I Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES III - JIS Medical Devices III Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES II - JIS Medical Devices II Handbook
January 1, 2015 - JSA
A description is not available for this item.
JIS MEDICAL DEVICES IV - JIS Medical Devices IV Handbook
January 1, 2015 - JSA
A description is not available for this item.
ASTM F561-19 - Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
January 1, 2019 - ASTM International

5.1 The investigation of retrieved implantable medical devices and adjacent tissues can be of value in the assessment of clinical complications associated with the use of a specific prosthetic device design; can expand the knowledge of clinical implant performance and interactions between...

ASTM F3263-17 - Standard Guide for Packaging Test Method Validation
December 15, 2017 - ASTM International

4.1 Addressing consensus standards with inter-laboratory studies (ILS) and methods specific to an organization. Test methods need to be validated in many cases, in order to be able to rely on the results. This has to be done at the organization performing the tests but is also performed in the...

IEEE BIO-MEDICAL - BIO-MEDICAL TELEMETRY
IEEE
A description is not available for this item.
ESD TR25.0-01 - Electrostatic Discharge Sensitivity Testing – Charged Board Event (CBE)
January 1, 2016 - ESD

INTRODUCTION In reviewing existing publications, such as ESDA White Paper 2 by Olney and Henry [1] as well as publications by Frank [2], McFarland [3], and Thompson [4], it was found that only anecdotal evidence existed up to 1983 for ESD failures of integrated circuits (ICs) mounted on printed...

NSF FOOD EQUIPMENT SET - FOOD EQUIPMENT SET
NSF
A description is not available for this item.
FORD MACHINERY/EQUIPMENT - MACHINERY & EQUIPMENT GUIDELINES
FORD
A description is not available for this item.
ASTM F561-13 - Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
September 1, 2013 - ASTM International

5.1 The investigation of retrieved implantable medical devices and adjacent tissues can be of value in the assessment of clinical complications associated with the use of a specific prosthetic device design; can expand the knowledge of clinical implant performance and interactions between...

ASTM F561-05a(2010) - Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
September 1, 2010 - ASTM International

The investigation of retrieved implantable medical devices and adjacent tissues can be of value in the assessment of clinical complications associated with the use of a specific prosthetic device design; can expand the knowledge of clinical implant performance and interactions between...

Principles of Microelectromechanical Systems
January 1, 2011 - WILEY

The building blocks of MEMS design through closed-form solutions Microelectromechanical Systems, or MEMS, is the technology of very small systems; it is found in everything from inkjet printers and cars to cell phones, digital cameras, and medical equipment. This book describes the...

IEC 60601-2-29 - Medical electrical equipment – Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators
June 1, 2008 - IEC

Addition: This Particular Standard applies to RADIOTHERAPY SIMULATORS: - that use diagnostic X-RAY EQUIPMENT to simulate physically a RADIOTHERAPY RADIATION BEAM, so that the TREATMENT VOLUME to be subjected to IRRADIATION during RADIOTHERAPY can be localized, and the position and size of...

IEC/TR 61852 - Medical Electrical Equipment - Digital Imaging and Communications in Medicine (DICOM) - Radiotherapy Objects
April 1, 1998 - IEC

This report specifies the following information objects: 1) A DICOM Image Information Object for Radiotherapy. It specifies the semantic content of RT Images. It is commonly abbreviated to the RT Image IOD. It also includes the corresponding Storage SOP Class so that this IOD can be used in Network...

Advertisement