loading
ASTM D7897-26 - Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
July 1, 2026 - ASTM International

1.1 Practice D7897 applies to simulation of the effects of field exposure on the solar reflectance and thermal emittance of roof surface materials including but not limited to field-applied coatings, factory-applied coatings, single-ply membranes, modified bitumen products, shingles, tiles,...

ASTM F3067-26 - Standard Guide for Radial Loading of Balloon-Expandable and Self-Expanding Vascular Stents
May 1, 2026 - ASTM International

4.1 Upon deployment, at the site of the vascular stenosis, the stent establishes the patency of the lumen until vascular remodeling occurs. The radial load acting upon the stent is imparted by vessel and lesion stretch. Additionally, the vessel might be affected by excursions due to pulsation...

ASTM E2955-13(2026) - Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
April 1, 2026 - ASTM International

1.1 These practices cover the calculation of profilograph response to longitudinal profiles of traveled surface roughness. 1.2 These practices utilize computer simulations to obtain profilograph responses, including surface sensing wheel (recording wheel) vertical displacement and reference...

ASTM ASTM51900-19(2026) - Standard Guidance for Dosimetry for Radiation Research
May 1, 2026 - ASTM International

4.1 Reliable dosimetry is indispensable for research on the effects of ionizing radiation on materials and products. Without reliable dosimetry valid conclusions cannot be reached, or the wrong conclusions might be reached. 4.2 This document is intended to provide direction on how to conduct...

ASTM G170-26 - Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
May 1, 2026 - ASTM International

5.1 Corrosion inhibitors continue to play a key role in controlling internal corrosion associated with oil and gas production and transportation. This results primarily from the industry's extensive use of carbon and low alloy steels, which, for many applications, are economic materials of...

ASTM F3201-26 - Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
May 1, 2026 - ASTM International

5.1 There is interest from industry and CAAs to create a means of compliance for software assurance for UAS, particularly in instances where conventional design assurance requirement management processes may over-prescribe requirements in relation to the level of risk of the UAS operation, or of...

ASTM F2446-04(2026) - Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
April 1, 2026 - ASTM International

4.1 Capturing high quality RAM performance data requires careful and consistent collection of equipment failure and repair data, operating hours, and repair time. A standard hierarchy of equipment boundaries has been needed for machinery data exchange among the stakeholders in shipbuilding, ship...

ASTM E2232-26 - Standard Guide for Selection and Use of Mathematical Methods for Calculating Dosimetric Quantities in Radiation Processing Applications
May 1, 2026 - ASTM International

4.1 Use as an Analytical Tool-Mathematical methods provide an analytical tool to be employed for many applications related to absorbed dose determinations in radiation processing. Mathematical calculations may not be used as a substitute for routine dosimetry in some applications (for example,...

ASTM G151-26 - Standard Practice for Exposing Materials in Accelerated Test Devices that Use Laboratory Light Sources
April 1, 2026 - ASTM International

4.1 Significance: 4.1.1 When conducting exposures in devices that use laboratory light sources, it is important to consider how well the accelerated test conditions will reproduce property changes and failure modes associated with end-use environments for the materials being tested. In addition, it...

ASTM D6335-25 - Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
November 1, 2025 - ASTM International

1.1 This test method covers the procedure to determine the amount of deposits formed by automotive engine oils utilizing the thermo-oxidation engine oil simulation test (TEOST2).3 An interlaboratory study (see Section 17) has determined it to be applicable over the range from 10?mg to 65?mg...

ASTM E3205-26 - Standard Test Method for Small Punch Testing of Metallic Materials
February 1, 2026 - ASTM International

4.1 The safety margins provided in the design for a component or structure can be reduced throughout its service life by aging. Aging is the process by which the physical and mechanical characteristics of component or structure materials change with time or use; this process may proceed by a single...

ASTM E296-70(2025) - Standard Practice for Ionization Gage Application to Space Simulators
December 1, 2025 - ASTM International

This practice provides application criteria, definitions, and supplemental information to assist the user in obtaining meaningful vacuum ionization gage measurements in space-simulation facilities. Acceptable vacuum-measuring equipment shall consist of those items in which performance is...

ASTM A370-26 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
February 1, 2026 - ASTM International

1.1 These test methods cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided,...

ASTM F3705-25 - Standard Guide for Testing Detect and Avoid Systems for Unmanned Aircraft Systems
December 1, 2025 - ASTM International

1.1 This guide applies to unmanned aircraft (UA) with a maximum dimension (for example, wingspan, disk diameter) =?25?ft (=?7.68 m) operating at airspeeds below 100?kts and of any configuration or category. It is meant to be applied in a "lower risk" (low- and medium-risk airspace as described by...

ASTM F3744-26 - Standard Guide for Corrosion Fatigue Evaluation of Absorbable Metals
February 1, 2026 - ASTM International

5.1 Evaluation Strategy: 5.1.1 Corrosion fatigue evaluation of absorbable metals may be useful for screening and validation of alloys, processes, and coatings, and also for verification and validation of fully designed implants. Corrosion fatigue testing may also be useful for informing an in vitro...

ASTM D5924-25 - Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
July 1, 2025 - ASTM International

4.1 This guide is intended to encourage consistency and thoroughness in the application of geostatistical simulation to environmental, geotechnical, and hydrogeological site investigations. 4.2 This guide may be used to assist those performing a simulation study or as an explanation...

ASTM E119-26 - Standard Test Methods for Fire Tests of Building Construction and Materials
January 1, 2026 - ASTM International

4.1 These test methods are intended to evaluate the duration for which the types of building elements noted in 1.1 contain a fire, retain their structural integrity, or exhibit both properties during a predetermined test exposure. 4.2 The test exposes a test specimen to a standard fire controlled...

ASTM E2734/E2734M-10(2025) - Standard Specification for Dimensions of Knife-Edge Flanges
December 1, 2025 - ASTM International

1.1 This standard specifies the dimensions of knife-edge style flanges and their associated gaskets used in vacuum systems for pressures ranging from 105 Pa to 10-11 Pa. Such flanges are widely used throughout vacuum technology applications in semiconductor processing tools, surface analysis...

ASTM D7097-25 - Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
November 1, 2025 - ASTM International

5.1 The test method is designed to predict the deposit-forming tendencies of engine oil in the piston ring belt and upper piston crown area. Correlation has been shown between the TEOST MHT procedure and the TU3MH Peugeot engine test in deposit formation. Such deposits formed in the ring-belt area...

Advertisement