This specification covers the standard requirements for porous metallic sleeve, flange, thrust, and spherical iron-base bearings that are produced from mixed metal powder metallurgy technology and then impregnated with oil to supply operating lubrication. Porous iron-base bearings shall be...
1.1 This specification covers porous metallic sleeve, flange, thrust, and spherical bronze-base bearings that are produced from mixed metal powders utilizing powder metallurgy (PM) technology and then impregnated with oil to supply operating lubrication. 1.2 Included are the specifications...
5.1 This test method is used to evaluate automotive engine oils for protection of engines against bearing weight loss. 5.2 This test method is also used to evaluate the SIG capabilities of multiviscosity-grade
1.1 This specification covers deformed steel reinforcing bars in cut lengths, with a head attached to one or both ends, for concrete reinforcement. Heads are forge-formed, machined from bar stock, or cut from plate. Attachment can be accomplished through: 1.1.1 Welding; 1.1.2 Integrally hot forging...
1.1 This guide specifies a method to measure the surface features, such as hills and valleys, and to estimate the in vivo material loss from the conical taper junctions, such as the femoral head/stem junction or adapter sleeve from explanted modular hip prosthesis, modular knee, or shoulder...
The General Services Administration has authorized the use of this commercial item description as a replacement for MIL-B-13506C, which is canceled.
QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION SAE-AS81819 Bearing, Plain, (Self-Aligning, Sleeve and Thrust), Self-Lubricating, High Speed Oscillation This QPL has been prepared for use by or for the Government in the acquisition of products covered by...
5.1 This test method is used to evaluate automotive engine oils for protection of engines against bearing weight loss. 5.2 This test method is also used to evaluate the SIG capabilities of multiviscosity-grade
5.1 This test method is used to evaluate automotive engine oils for protection of engines against bearing weight loss. 5.2 This test method is also used to evaluate the SIG capabilities of multiviscosity-grade
Narrow Your Results