loading
ASABE S572 - Spray Nozzle Classification by Droplet Spectra
February 1, 2020 - ASABE

Purpose and Scope This Standard defines droplet spectrum categories for the classification of spray nozzles, relative to specified reference fan nozzles discharging spray into static air or so that no stream of air enhances atomization. The purpose of classification is...

UL 2351 - Spray Nozzles for Fire-Protection Service
December 13, 2023 - ULSE

1.1 These requirements cover automatic and non-automatic (open) type water spray nozzles for installation in accordance with the Standard for Installation of Sprinkler Systems, NFPA 13, and the Standard for Water Spray Fixed Systems for Fire Protection, NFPA 15. 1.2...

ULC 2351 - Spray Nozzles for Fire-Protection Service
December 13, 2023 - ULSE

1.1 These requirements cover automatic and non-automatic (open) type water spray nozzles for installation in accordance with the Standard for Installation of Sprinkler Systems, NFPA 13, and the Standard for Water Spray Fixed Systems for Fire Protection, NFPA 15. 1.2...

ASTM E641-01(2006) - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
November 1, 2006 - ASTM International

1.1 These methods cover procedures for testing hydraulic spray nozzles used in agriculture. The methods herein cover the following performance parameters: nozzle flow rate, nozzle spray angle, liquid distribution, spray droplet size, and nozzle...

ASTM E641-85(2000) - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
April 10, 2001 - ASTM International

1.1 These methods cover procedures for testing hydraulic spray nozzles used in agriculture. The methods herein cover the following performance parameters: nozzle flow rate, nozzle spray angle, liquid distribution, spray droplet size, and nozzle...

ASTM E641-01 - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
April 10, 2001 - ASTM International

1.1 These methods cover procedures for testing hydraulic spray nozzles used in agriculture. The methods herein cover the following performance parameters: nozzle flow rate, nozzle spray angle, liquid distribution, spray droplet size, and nozzle...

ASTM E641 - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
April 1, 2021 - ASTM

These methods cover procedures for testing hydraulic spray nozzles used in agriculture. The methods herein cover the following performance parameters: nozzle flow rate, nozzle spray angle, liquid distribution, spray droplet size, and nozzle...

ASTM E641-21 - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
April 1, 2021 - ASTM International

1.1 These methods cover procedures for testing hydraulic spray nozzles used in agriculture. The methods herein cover the following performance parameters: nozzle flow rate, nozzle spray angle, liquid distribution, spray droplet size, and nozzle...

ISO 6182-14 - Fire protection - Automatic nozzle systems - Part 14: Requirements and test methods for water spray nozzles
February 1, 2019 - ISO

This document specifies performance requirements, methods of test, and marking requirements for open water spray nozzles. This document is not applicable to open sprinklers or open water mist nozzles. Factors of installation, such as nozzle spacing, design densities,...

NFPA 1964 - STANDARD FOR SPRAY NOZZLES
NFPA
A description is not available for this item.
ASTM E641-01(2012)e1 - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture (Withdrawn 2021)
October 1, 2012 - ASTM International

1.1 These methods cover procedures for testing hydraulic spray nozzles used in agriculture. The methods herein cover the following performance parameters: nozzle flow rate, nozzle spray angle, liquid distribution, spray droplet size, and nozzle...

ISO TR 21784 - Plain bearings - Spray nozzle type directed lubrication for tilting pad bearings
September 1, 2018 - ISO

Directed lubrication is an advanced technology that is capable of reducing the power loss and improving the performance of tilting pad type bearings. Unlike flooded lubrication, where the bearing components remain permanently submerged in an oil filled housing, with directed lubrication the...

FMAPPROVAL 2021/2025 - Automatic and Open Water-Spray Nozzles for Installation in Permanently Piped Systems
February 1, 2010 - FM

This standard sets performance requirements for automatic and open water-spray nozzles in the following product categories and class numbers: Each system is designed and calculated for the hazard, and each nozzle is chosen for its specific discharge capacity and spray...

UL 401 - Portable Spray Hose Nozzles for Fire-Protection Service
October 16, 2014 - ULSE

1.1 These requirements cover portable hand line spray hose nozzles intended for general fire fighting or for use with fire hose mounted on standpipe systems. 1.2 Requirements for the installation and use of spray nozzles used in standpipe systems are intended to be in...

BS PD ISO/TR 21784 - Plain bearings — Spray nozzle type directed lubrication for tilting pad bearings
September 30, 2018 - BSI
A description is not available for this item.
ASTM E641 - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture (Withdrawn 2021)
January 20, 2021 - ASTM International
A description is not available for this item.
Advertisement