loading
AWWA STORAGE SET - AWWA STORAGE SET
AWWA
A description is not available for this item.
IEEE MAGNETIC STORAGE - MAGNETIC STORAGE HANDBOOK, SECOND EDITION
IEEE
A description is not available for this item.
ASTM F3830-26 - Standard Specification for Electrical Energy Storage Systems
June 15, 2026 - ASTM International

1.1 This specification covers requirements for the design, installation and qualification of rechargeable lithium batteries based electrical energy storage systems (EESS) on light sport category aircraft used for propulsion purposes. The manufacturer shall comply with all applicable...

ASTM F2598-22(2026) - Standard Consumer Safety Specification for Sealed Storage Chests such as Cedar Chests, Hope Chests, Blanket Chests, Keepsake Chests
July 1, 2026 - ASTM International

This specification deals with consumer safety for clothing storage chests. It is intended to minimize the incidents and injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of these chests. The design of the lid support, closures, and locks shall conform...

ASTM D4576-16(2026) - Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
July 1, 2026 - ASTM International

4.1 This test method provides a technique for evaluating mold growth resistance characteristics of Wet Blue and Wet White, and should assist in the prediction of storage time before molding occurs. 4.2 The degree of correlation between this test and commercial quantities of Wet Blue and Wet...

ASTM F3063/F3063M-26 - Standard Specification for Aircraft Fuel Storage and Delivery
April 1, 2026 - ASTM International

1.1 This specification covers minimum requirements for the design and integration of Fuel Storage and Delivery system installations for aeroplanes. 1.2 This specification is applicable to aeroplanes as defined in the F44 terminology standard. 1.3 The applicant for a design approval must seek...

ASTM F1488-26a - Standard Specification for Coextruded Composite Pipe
August 1, 2026 - ASTM International

1.1 This specification covers coextruded composite pipe, intended for non-pressure gravity flow drain waste or vent (DWV) service, or plastic underdrain service, or electrical or comunications conduit service produced by a coextrusion die system, in which the concentric layers are formed and...

ASTM D445-26 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
July 1, 2026 - ASTM International

5.1 Many petroleum products, and some non-petroleum materials, are used as lubricants, and the correct operation of the equipment depends upon the appropriate viscosity of the liquid being used. In addition, the viscosity of many petroleum fuels is important for the estimation of optimum...

ASTM ASTM52116-26 - Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
May 1, 2026 - ASTM International

1.1 This practice outlines dosimetric procedures to be followed with self-contained dry-storage gamma irradiators. For irradiators used for routine processing, procedures are given to ensure that product processed will receive absorbed doses within prescribed limits. 1.2 This practice covers...

ASTM D6064-26 - Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
July 1, 2026 - ASTM International

1.1 This specification covers requirements for HFC-227ea as a fire-fighting medium. 1.2 This specification does not address the fire-fighting equipment or hardware that employs HFC-227ea or the conditions of employing such equipment (for example, handhelds, fixed installations, etc.). 1.3 This...

ASTM D6231/D6231M-26 - Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)
July 1, 2026 - ASTM International

1.1 This specification covers the requirements for HFC-125 as a fire-fighting medium. 1.2 This specification does not address the fire-fighting equipment or hardware that employs HFC-125 or the conditions of employing such equipment, for example, hand helds, fixed installations, etc. 1.3 This...

ASTM D6126/D6126M-26 - Standard Specification for HFC-23 (Trifluoromethane, CHF3)
July 1, 2026 - ASTM International

1.1 This specification covers the requirements for HFC-23 as a fire fighting medium. 1.2 This specification does not address the fire fighting equipment or hardware that employs HFC-23 or the conditions of employing such equipment (for example: handshields, fixed installations, etc.). 1.3 This...

ASTM D6541-26 - Standard Specification for HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane, (CF3CH2CF3)
July 1, 2026 - ASTM International

1.1 This specification covers the requirements for HFC-236fa as a fire-fighting medium. 1.2 This specification does not address the fire-fighting equipment or hardware that employs HFC-236fa or the conditions of employing such equipment (for example, hand-helds, fixed installations, and so forth)....

ASTM F3826-26 - Standard Specification for Liquid Energy Storage Systems for Light Sport Category Aircraft
May 1, 2026 - ASTM International

1.1 This specification covers requirements for liquid energy storage systems-fuel tanks-for light sport category aircraft. 1.2 This specification only addresses liquid energy storage systems that are either vented to the atmosphere or are pressurized to less than one atmosphere. 1.3...

ASTM E3301-26 - Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
July 1, 2026 - ASTM International

5.1 Dynamic mechanical analysis monitors changes in the viscoelastic properties (that is, storage modulus, loss modulus, tangent angle delta) of a material as a function of temperature and frequency, providing a means to quantify these changes. In many cases, the value to be assigned is the...

Advertisement