loading
HN 1097 - SYNTHETIC LUBRICANT
HOLDEN
A description is not available for this item.
GMW18273 - Powertrain Take-Off Unit (PTU) Synthetic Lubricant
June 1, 2020 - GMW

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose/Material Description. This is the specification for GM Part Number 9986482 which is a Powertrain...

AS29561A - PACKING, PREFORMED, "O" RING, SYNTHETIC LUBRICANT RESISTANT
December 30, 2009 - SAE International
A description is not available for this item.
AS29561 - PACKING, PREFORMED, "O" RING, SYNTHETIC LUBRICANT RESISTANT
March 1, 2001 - SAE International
A description is not available for this item.
9986482 - POWERTRAIN TAKE-OFF UNIT (PTU) SYNTHETIC LUBRICANT
GMNA
A description is not available for this item.
MS 29561 - PACKING, PREFORMED, "O" RING, SYNTHETIC LUBRICANT RESISTANT
NPFC
A description is not available for this item.
AMS7272G - Rubber: Butadiene-Acrylonitrile (NBR) Synthetic Lubricant Resistant 65 - 75 Hardness For Seals in Synthetic Lubricant Systems
April 12, 2013 - SAE International

This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings, compression seals, o-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.

9986181 - Synthetic Polyalkylene Glycol Lubricant
October 1, 2020 - GMNA

Material Description. This specification defines the minimum acceptable requirements for synthetic polyalkylene glycol (PAG) lubricants for use in GM mobile air conditioning systems designed for HFC-134a refrigerant. This specification applies only to PAG lubricants approved...

ASHRAE STD 172 - Method of Test for Insoluble Materials in Synthetic Lubricants and HFC Refrigerant Systems
March 31, 2017 - ASHRAE

The test will determine the presence of materials that separate from refrigerant and lubricant mixtures over a range of temperatures and concentrations. The test is based on the precipitation of insoluble material in a lubricant/refrigerant combination. The results can be used to...

NAS617 - PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, SYNTHETIC LUBRICANT RESISTANT
December 27, 2019 - AIA/NAS
A description is not available for this item.
9986277 - Synthetic Polyol Ester Lubricant
October 1, 2016 - GMNA

Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Material Description. This specification defines the minimum acceptable requirements for the specific...

FORD M-1C56A - SYNTHETIC LUBRICANT ***TO BE USED WITH FORD WSS-M99P1111-A***
August 1, 1988 - FORD

1. SCOPE: The material defined by this standard is a blend of polymerized butylenes.

AMS7272D - RINGS, SEALING, NITRILE RUBBER Synthetic Lubricant Resistant 65 - 75
July 1, 1980 - SAE International

This specification covers a nitrile rubber in the form of molded rings.

GMSA EMS 9310008 - SYNTHETIC TRANSMISSION LUBRICANT - SAE 50
GMSA
A description is not available for this item.
NFPA T1.9.2 - PNEUMATIC FLUID POWER-USE OF SYNTHETIC LUBRICANTS GUIDELINES
(NFPA)
A description is not available for this item.
FORD WSD-M2C200-B - LUBRICANT, GEAR, SYNTHETIC HYDROCARBON
January 31, 1995 - FORD

1. SCOPE The material defined by this specification is a multiviscosity transmission lubricant using synthetic hydrocarbon (PAO) base fluids compounded with viscosity index improvers and extreme pressure additives.

9985752 - SYNTHETIC POLYALKYLENE GLYCOL LUBRICANT
GMNA
A description is not available for this item.
9986066 - SYNTHETIC POLYALKYLENE GLYCOL LUBRICANT
GMNA
A description is not available for this item.
9985856 - LUBRICANT, SYNTHETIC FLUID
GMNA
A description is not available for this item.
DELPHI DX280047 - LUBRICANT, SYNTHETIC FLUID
DELPHI-I
A description is not available for this item.
Advertisement