loading
ASTM D7806-26 - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
May 1, 2026 - ASTM International

1.1 This test method covers the determination of fatty acid methyl ester (FAME) biodiesel and triglyceride (TAG) concentrations in traditional diesel and renewable diesel fuel blends using a portable mid-infrared spectrometer. 1.2 The method applies to samples with biodiesel concentrations...

ASTM A6/A6M-26a - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
April 1, 2026 - ASTM International

This specification deals with the general requirements that apply to rolled structural steel bars, plates, shapes, and sheet piling. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace followed by additional refining in a ladle metallurgy furnace, or secondary melting...

ASTM A416/A416M-26 - Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
April 1, 2026 - ASTM International

This specification deals with the standard types and grade requirements of seven-wire, uncoated steel strands for use in the construction of pre-tensioned and post-tensioned pre-stressed concrete. The two types of strand are low-relaxation and stress-relieved (normal relaxation). The base metal...

ASTM A615/A615M-26 - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
March 1, 2026 - ASTM International

This specification covers deformed and plain carbon-steel bars for concrete reinforcements in cut lengths and coils. Materials considered under this specification are available in Grades 40 [280], 60 [420] and 75 [520]. Steel samples shall be rolled from properly identified heats of mold cast or...

ASTM D3143/D3143M-19(2025) - Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
November 1, 2025 - ASTM International

1.1 This test method covers the determination of flash points by the Tag open-cup apparatus of cutback asphalts having flash points of less than 93?°C [200?°F]. Note 1: Specifications commonly designate the Cleveland open cup (Test Method D92, IP?36) method for asphalt cements and cutback...

ASTM A6/A6M-26 - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
January 1, 2026 - ASTM International

This specification deals with the general requirements that apply to rolled structural steel bars, plates, shapes, and sheet piling. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace followed by additional refining in a ladle metallurgy furnace, or secondary melting...

ASTM E2631-25 - Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label
December 1, 2025 - ASTM International

1.1 This practice is for supplemental identification labels assigned by an entity and affixed to equipment to permit control. 1.2 Identifying labels include, but are not limited to, removable and non-removable tags, bands, and plates featuring a means of identification such as alphanumeric...

ASTM F2970-25 - Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
December 1, 2025 - ASTM International

1.1 The purpose of this practice is to delineate requirements regarding the design, manufacture, installation, operation, maintenance, inspection and major modification of commercial or institutional trampoline courts designed for amusement, entertainment or recreation. 1.2 This standard applies to...

ASTM A615/A615M-25 - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
October 15, 2025 - ASTM International

This specification covers deformed and plain carbon-steel bars for concrete reinforcements in cut lengths and coils. Materials considered under this specification are available in Grades 40 [280], 60 [420] and 75 [520]. Steel samples shall be rolled from properly identified heats of mold cast or...

ASTM D8558-25 - Standard Guide for Supply Chain Traceability, Authentication, Verification, Validation, and Oversight Using Emerging Technologies Including Blockchain
November 1, 2025 - ASTM International

1.1 Data Sharing Security Measures-This standard presents an opportunity to share more thorough, reliable upstream data, in a way that also preserves and protects companies' intellectual property and upstream documents. The use of a technology platform, underpinned by a distributed ledger, that is,...

ASTM D7806-20(2025) - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
May 15, 2025 - ASTM International

1.1 This test method covers the determination of fatty acid methyl ester (FAME) biodiesel and triglyceride (TAG) concentrations in traditional diesel and renewable diesel fuel blends using a portable mid-infrared spectrometer. 1.2 The method applies to samples with biodiesel concentrations...

ASTM E3456-25 - Standard Practice for On-Site Identification of Firestop Systems and Judgments
June 1, 2025 - ASTM International

1.1 This practice covers the identification requirements for installed firestop systems (FS), fire-resistive joint systems (FRJS), perimeter fire containment systems (PFCS), and continuity head-of-wall joint systems (CHWJS). These systems are installed on, in, or between fire resistance rated wall...

AS41089-3 - AS41089-90 Tag, Attachment
October 18, 2023 - SAE Industry Technologies Consortia

Scope is unavailable.

ASTM A228/A228M-18(2024)e1 - Standard Specification for Steel Wire, Music Spring Quality
August 15, 2024 - ASTM International

This specification covers high quality, round, cold-drawn steel music spring quality wire for the manufacture of springs subject to high stresses or requiring good fatigue properties. The steel shall either be ingot cast or strand cast. Heat and product analysis shall be performed wherein steel...

ASTM A6/A6M-24b - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
August 15, 2024 - ASTM International

This specification deals with the general requirements that apply to rolled structural steel bars, plates, shapes, and sheet piling. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace followed by additional refining in a ladle metallurgy furnace, or secondary melting...

ASTM A1035/A1035M-24 - Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
July 1, 2024 - ASTM International

This specification covers low-carbon, chromium, steel bars, deformed and plane for concrete reinforcement in cut lengths and coils. The bars shall be rolled from properly identified heats of mold cast or strand cast steel using the basic oxygen, electric-furnace, or open-hearth process. Heat...

ASTM D8558-24 - Standard Guide for Verification of a Certificate of Authentication Used to Track Products through Their Supply Chain by Utilizing Blockchain Technology
July 1, 2024 - ASTM International

1.1 This guide was written to introduce the concept of tracking physical and digital goods as well as crypto assets for transactions or marketing and branding purposes on a Web3 blockchain technology storage platform. This represents a significant shift in technology, where blockchain assets are...

ASTM A615/A615M-24 - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
May 15, 2024 - ASTM International

This specification covers deformed and plain carbon-steel bars for concrete reinforcements in cut lengths and coils. Materials considered under this specification are available in Grades 40 [280], 60 [420] and 75 [520]. Steel samples shall be rolled from properly identified heats of mold cast or...

ASTM A6/A6M-24a - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
May 1, 2024 - ASTM International

This specification deals with the general requirements that apply to rolled structural steel bars, plates, shapes, and sheet piling. The steel shall be made in an open-hearth, basic-oxygen, or electric-arc furnace followed by additional refining in a ladle metallurgy furnace, or secondary melting...

ASTM A416/A416M-24 - Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
March 1, 2024 - ASTM International

This specification deals with the standard types and grade requirements of seven-wire, uncoated steel strands for use in the construction of pre-tensioned and post-tensioned pre-stressed concrete. The two types of strand are low-relaxation and stress-relieved (normal relaxation). The base metal...

Advertisement