loading
AWWA TANK SET - AWWA TANK SET
AWWA
A description is not available for this item.
DS/ISO 1496-3 - Series 1 freight containers – Specification and testing – Part 3: Tank containers for liquids, gases and pressurized dry bulk
May 6, 2019 - DS

This document specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances (dry bulk) which can be loaded or unloaded as liquids by gravity or pressure discharge, for international...

ISO 1496-3 - Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk
April 1, 2019 - ISO

This document specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances (dry bulk) which can be loaded or unloaded as liquids by gravity or pressure discharge, for international...

DS/ISO 9669 - Series 1 freight containers - Interface connections for tank containers
October 26, 1992 - DS

The standard specifies the characteristics of interface connections for tank containers complying with ISO 1496-3. The amendment specifies certain dimensions and characteristics of man-hole openings.

NFPA 326 - Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair
January 1, 2020 - NFPA

This standard shall apply to the safeguarding of tanks or containers operating at nominal atmospheric pressure that contain or have contained flammable or combustible liquids or other hazardous substances and related vapors or residues. This standard shall not apply to tank...

SAA AS/NZS 3711.6 - PACKAGING - FREIGHT CONTAINERS - TANK CONTAINERS
SAI
A description is not available for this item.
ASTM D3240-25 - Standard Test Method for Undissolved Water In Aviation Turbine Fuels
October 1, 2025 - ASTM International

5.1 Undissolved (free) water in aviation fuel can encourage the growth of microorganisms and subsequent corrosion in the tanks of aircraft and can also lead to icing of filters in the fuel system. Control of free water is exercised in ground fueling equipment by use of filter-coalescers and...

ASTM E1888/E1888M-17(2025) - Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores
July 1, 2025 - ASTM International

1.1 This practice covers guidelines for acoustic emission (AE) examinations of pressurized containers made of fiberglass reinforced plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals. 1.2 This...

ASTM E2997-25 - Standard Test Method for Analysis of Biodiesel Products by Gas Chromatography-Mass Spectrometry
June 1, 2025 - ASTM International

5.1 This test method is used to identify FAMEs and petroleum distillates found in biodiesel products. Derivatization is not necessary to identify FAMEs. 5.1.1 The identification of biodiesel in debris and liquid samples from a fire scene can provide data relevant to judgments regarding...

ASTM D4801-08(2025) - Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
January 1, 2025 - ASTM International

This specification covers the requirements for extruded (cast or blown) and compression-molded sheeting made from low-, medium-, and high-density polyethylenes and copolymers in specified thicknesses. Depending on the functional requirements, sheeting conforming to this specification is used in...

ASTM D6282/D6282M-25 - Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
March 1, 2025 - ASTM International

5.1 Direct Push Soil Sampling is used extensively in environmental site characterization of soils below ground surface and can also be used for subsurface geotechnical site characterization (3, 7-13). Limited early studies have been done using Direct Push Soil Sampling for environmental...

ASTM D6759-24 - Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
June 1, 2024 - ASTM International

1.1 This practice describes sampling devices and procedures for collecting samples of liquids or sludges, or both, whose upper surface can be accessed by the suitable device. These devices may be used to sample tanks that have an appropriately sized and located sampling port. 1.2 This...

UL 79 - ANSI/CAN/UL/ULC Power-Operated Pumps for Petroleum Dispensing Products
May 31, 2024 - ULSE

1.1 These requirements cover products described in 2. Requirements for the installation and use of these products are included in the Flammable and Combustible Liquids Code, NFPA 30; the Automotive and Marine Service Station Code, NFPA 30A; and the National Electrical Code, NFPA 70. 1.2 These...

ULC 79 - Power-Operated Pumps for Petroleum Dispensing Products
May 31, 2024 - ULSE

1.1 These requirements cover products described in 2. Requirements for the installation and use of these products are included in the Flammable and Combustible Liquids Code, NFPA 30; the Automotive and Marine Service Station Code, NFPA 30A; and the National Electrical Code, NFPA 70. 1.2 These...

UL 79B - ANSI/CAN/UL/ULC Power-Operated Pumps for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
May 31, 2024 - ULSE

1.1 These requirements cover products described in 2 when used with one or more of the fuels described in 3. 1.2 These requirements cover electrically-, hydraulically-, or pneumatically-driven power-operated pumps for use with petroleum products in the following applications: a) Self-contained...

ULC 79B - Power-Operated Pumps for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
May 31, 2024 - ULSE

1.1 These requirements cover products described in 2 when used with one or more of the fuels described in 3. 1.2 These requirements cover electrically-, hydraulically-, or pneumatically-driven power-operated pumps for use with petroleum products in the following applications: a) Self-contained...

UL 2152 - ANSI/CAN/UL/ULC Special Purpose Nonmetallic Containers and Tanks for Specific Combustible or Noncombustible Liquids
January 26, 2021 - ULSE

1.1 These minimum requirements cover special purpose nonmetallic containers and tanks (vessels) for specific aboveground use applications for combustible or non-combustible liquids as indicated for each special purpose type. The requirements address the specific designs, features,...

ULC 2152 - Special Purpose Nonmetallic Containers and Tanks for Specific Combustible or Noncombustible Liquids
January 26, 2021 - ULSE

1.1 These minimum requirements cover special purpose nonmetallic containers and tanks (vessels) for specific aboveground use applications for combustible or non-combustible liquids as indicated for each special purpose type. The requirements address the specific designs, features,...

Advertisement