loading
GM TEXTILES BINDER - ENGINEERING MATERIALS AND PROCESSES - TEXTILES
GMNA
A description is not available for this item.
ASTM D4966-22(2026) - Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
July 1, 2026 - ASTM International

1.1 This test method covers the determination of the abrasion resistance of textile fabrics using the Martindale abrasion tester. The method is generally applicable to knit, woven, and nonwoven fabrics; however, material thickness may limit suitability for testing due to specimen holder...

ASTM D4970/D4970M-22(2026) - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
July 1, 2026 - ASTM International

1.1 This test method covers the determination of the resistance to the formation of pills and other related surface changes on textile fabrics using the Martindale tester. Note 1: For other methods, if testing the pilling resistance of textiles, refer to Test Methods D3511/D3511M,...

ASTM D7139-20(2026) - Standard Terminology for Cotton Fibers
July 1, 2026 - ASTM International

1.1 This standard is the compilation of all terminology developed by Subcommittee D13.11 on Cotton Fibers. 1.2 This terminology is unique to the Cotton Fibers industry. Meanings of the same terms used outside the industry can be found in other compilations or in dictionaries of general usage. 1.3...

ASTM F1731-21(2026) - Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
July 1, 2026 - ASTM International

1.1 This practice is intended to assist in size selection of work uniforms for fire and rescue services personnel and workers who have the potential to be exposed to thermal hazards. Work uniform ensembles consist of a shirt and trouser apparel combination. 1.1.1 This practice does not apply to...

ASTM D7680-10(2026) - Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for preparing laboratory prints of paste printing inks using a motor-driven printability tester. 1.2 This practice covers printability testers of four different designs, referred to as Tester A, B, C, and D. These testers feature "push-button" control of...

ASTM D4391-18a(2026) - Standard Terminology Relating to The Burning Behavior of Textiles
July 15, 2026 - ASTM International
A description is not available for this item.
ASTM E3160-26 - Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles
April 15, 2026 - ASTM International

5.1 Porous articles (often textiles) are often treated with antimicrobial agents to reduce the growth of microorganisms during use, in storage, or while waiting to be laundered, or both. Additionally, antimicrobial agents are added to reduce or control the overall microbial growth on porous...

ASTM E3162-26 - Standard Practice Measuring the Durability of Antibacterial Agents Applied to Textiles under Simulated Home Laundering Conditions
April 1, 2026 - ASTM International

1.1 To determine the durability of standard antibacterial treatments on textile products such as apparel, piece goods, household articles, hereinafter referred to as "textile" or "textile products" to multiple home launderings. 1.2 This practice subjects textile products...

ASTM D1777-26 - Standard Test Method for Thickness of Textile Materials
January 1, 2026 - ASTM International

1.1 This test method covers the measurement of the thickness of most textile materials. 1.2 This test method applies to most fabrics including woven fabrics, air bag fabrics, blankets, napped fabrics, knitted fabrics, layered fabrics, and pile fabrics. The fabrics may be untreated, heavily...

ASTM D1909-13(2026) - Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers
January 1, 2026 - ASTM International

4.1 The value listed for the commercial moisture regain and commercial allowance of a specific fiber type is not an experimentally determined quantity but a purely defined value arrived at for commercial purposes by interested parties. The actual moisture regain values of textile materials,...

ASTM D3136-25 - Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
November 1, 2025 - ASTM International

1.1 This standard is a compilation of terminology developed by Subcommittee D13.62 on Labeling that is related to refurbishing and labeling for apparel, textile, home furnishing, and leather products other than upholstered furniture and floor coverings. 1.2 This terminology provides a...

ASTM D7018/D7018M-26 - Standard Terminology Relating to Glass Fiber and Its Products
February 15, 2026 - ASTM International

1.1 This standard is a compilation of terminology developed by Committee D13.18 on Glass Fiber and its Products. 1.2 This terminology is unique to glass fibers, strands, yarns, fabrics, etc. in the glass textile industry. Terms that are generally understood or adequately defined in other...

ASTM D6544-25 - Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
November 1, 2025 - ASTM International

5.1 The significance of this practice is that a textile intended to be labeled as UV-protective, which will ultimately be submitted for UV transmittance testing, will be in a state that simulates its condition at the end of two years of normal seasonal use. UV resistance of a textile...

ASTM D5253-25 - Standard Terminology Relating to Refurbishing or Care of Floor Coverings and Textile Upholstered Furniture
August 1, 2025 - ASTM International

1.1 This standard is a compilation of all terminology developed by Subcommittee D13.62 on Labeling and related to refurbishing or care of floor coverings and textile upholstered furniture, excluding leather. These items cannot be refurbished by the laundering and dry cleaning methods used...

ASTM D3939/D3939M-26 - Standard Test Method for Snagging Resistance of Fabrics (Mace)
January 1, 2026 - ASTM International

1.1 This test method determines the snagging resistance of a fabric. 1.2 Studies of fabric snagging have shown that this test method is suitable for a range of woven and knitted fabrics made from textured or untextured filament yarns or spun yarns or combinations of these yarns.2,3 This test method...

ASTM D5278/D5278M-26 - Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
January 1, 2026 - ASTM International

1.1 This test method determines the elongation characteristics of narrow elastic fabrics made from natural or man-made elastomers, either alone or in combination with other textile fibers, when tested with a static load testing procedure before or after laundering. Note 1: For determination...

ASTM D3107-26 - Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
January 1, 2026 - ASTM International

1.1 These test methods cover the determination of the amount of fabric stretch, fabric growth, and fabric recovery of fabrics woven in whole or in part from stretch yarns after a specified tension and extension. 1.2 These test methods are intended for use with woven fabrics exhibiting high stretch...

ASTM E3404-25 - Standard Guide for Forensic Examination of Fibers
November 1, 2025 - ASTM International

1.1 This guide is an introduction to the examination of textile fibers in forensic casework. It is intended to assist individuals who conduct fiber analyses in their evaluation, selection, and application of tests that can be of value to their examinations. The goal is to provide a...

ASTM F3260-25 - Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
October 1, 2025 - ASTM International

5.1 Consideration of the flexural stiffness of medical textiles is important, as these devices often need to possess properties that allow them to conform readily to the anatomic structures they are designed to support or protect. This test method outlines the materials and methods for the...

Advertisement