This standard shall specify the design, performance, testing, and certification requirements for thermal imagers used by fire service personnel during emergency incident operations. This standard shall specify requirements for new thermal imagers for the fire service....
1.1 This practice covers the determination of the noise equivalent temperature difference (NETD; NE?T) of thermal imaging systems of the conventional forward-looking infrared (FLIR) or other types that utilize an optical-mechanical scanner; it does not include charge-coupled devices...
5.1 This practice relates to a thermal imaging system's effectiveness for discerning details in a scene. 5.2 MRTD values provide estimates of resolution capability and may be used to compare one system with another. (Lower MRTD values indicate better resolution.) 5.3 Due to the...
5.1 This practice gives a measure of a thermal imaging system's effectiveness for detecting a small spot within a large background. Thus, it relates to the detection of small material defects such as voids, pits, cracks, inclusions, and occlusions. 5.2 MDTD values provide estimates of...
This book is a guide for the constantly growing community of the users of medical thermal imaging. It describes where and how an infrared equipment can be used in a strictly standardised way and how one can ultimately comprehensively report the findings. Due to their insight into the...
This new up-to-date edition of the successful handbook and ready reference retains the proven concept of the first, covering basic and advanced methods and applications in infrared imaging from two leading expert authors in the field. All chapters have been completely revised and expanded...
This standard shall contain minimum requirements for training fire service personnel to utilize fire service thermal imagers (TI). This standard specifies evolutions that can be adapted to local conditions and serves as a standard mechanism for the evaluation of minimum acceptable...
1.1 This practice covers the determination of the noise equivalent temperature difference (NETD; NEΔT) of thermal imaging systems of the conventional forward-looking infrared (FLIR) or other types that utilize an optical-mechanical scanner; it does not include charge-coupled devices...
5.1 This practice relates to a thermal imaging system's effectiveness for discerning details in a scene. 5.2 MRTD values provide estimates of resolution capability and may be used to compare one system with another. (Lower MRTD values indicate better resolution.) 5.3 Due to the...
5.1 This practice gives a measure of a thermal imaging system's effectiveness for detecting a small spot within a large background. Thus, it relates to the detection of small material defects such as voids, pits, cracks, inclusions, and occlusions. 5.2 MDTD values provide estimates of...
1.1 This test method covers the use of an Image Quality Indicator (IQI) system to determine the relative2 quality of film radiographic images produced by direct, thermal neutron radiographic examination. The requirements expressed in this test method are not intended to control...
1.1 This test method covers electronic instruments intended for measurement of temperature by detecting the intensity of thermal radiation exchanged between the subject of measurement and the sensor. 1.2 The devices covered by this test method are referred to as infrared thermometers in this...
1.1 This practice covers the fabrication of Sensitivity Indicators (SI), which can be used to determine the relative quality of film radiographic images produced by direct, thermal neutron radiographic examination. 1.2 Units-The values stated in inch-pound units are to be regarded as...
1.1 Purpose-Practices to be employed for the radiographic examination of materials and components with thermal neutrons are outlined herein. They are intended as a guide for the production of neutron radiographs that possess consistent quality characteristics, as well as aiding the user to...
1.1 This test method defines an empirical technique for the measurement of the effective collimation ratio, L/D, of neutron radiography beams. The technique is based upon analysis of a neutron radiographic image and is independent of measurements and calculations based on physical dimensions...
3.1 This guide is intended for use by individuals who evaluate buildings for air infiltration/exfiltr
1.1 This test method covers the design, materials, manufacture, and use of a divergence and alignment indicator (DAI) for measuring the effective divergence of a thermal neutron beam used for neutron imaging as well as determining the alignment of the imaging plane relative...
Narrow Your Results