loading
ASTM F1605-14(2026) - Standard Test Method for Performance of Double-Sided Griddles
March 1, 2026 - ASTM International

1.1 This test method covers the energy consumption and cooking performance of double-sided griddles. The food service operator can use this evaluation to select a double-sided griddle and understand its energy efficiency and productivity. 1.2 This test method is applicable to...

ASTM F1919-26 - Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric
March 1, 2026 - ASTM International

This specification covers griddles which utilize gas or electrical heat sources, or both, for cooking food in the commercial and institutional food service establishments. Griddles covered by this specification are classified by type, size, style, and electrical class. Type: type 1 - for counter...

ASTM F2521-09(2026) - Standard Specification for Heavy-Duty Ranges, Gas and Electric
March 1, 2026 - ASTM International

This specification covers heavy-duty ranges that use gas or electrical heat sources, or both, for cooking food in the commercial and institutional food service establishments. Types: type I-electric range top with electric oven; type I-electric range top with gas-fired oven; type I-electric range...

ASTM F2022-01(2026) - Standard Test Method for Performance of Booster Heaters
March 1, 2026 - ASTM International

1.1 This test method evaluates the energy efficiency, energy consumption and water heating performance of booster heaters. The food service operator can use this evaluation to select a booster heater and understand its energy consumption. 1.2 This test method is applicable to electric, gas, and...

ASTM D8300-25 - Standard Test Method for Silica, Precipitated, Hydrated—Electrical Conductivity
November 1, 2025 - ASTM International

4.1 The electrical conductivity of silica is related to both the adsorbed water and the hydroxyl groups on the surface of the precipitated, hydrated silica. Since the electrical conductivity of distilled or de-ionized water is very low, high electrical conductivity values are associated with ionic...

ASTM B753-07(2024) - Standard Specification for Thermostat Component Alloys
November 1, 2024 - ASTM International

1.1 This specification describes requirements for alloys to be used as components in the manufacture of bonded multi-component thermostat metal strip. More specifically it describes alloys having composition, and thermal expansion suitable for application in thermostat metal sheet and...

ASTM B106-08(2024) - Standard Test Methods for Flexivity of Thermostat Metals
November 1, 2024 - ASTM International

1.1 These test methods cover the determination of flexivity (a measure of thermal deflection rate or deflection temperature characteristics) of thermostat metals. 1.1.1 Test Method A-Tested in the form of flat strip 0.015 in. (0.38 mm) or over in thickness. 1.1.2 Test Method B-Tested in the...

ASTM B388-06(2024) - Standard Specification for Thermostat Metal Sheet and Strip
November 1, 2024 - ASTM International

This specification covers the standard for thermostat metals in the form of sheet or strip proposed for use as temperature-sensitive elements of devices for controlling, compensating, or indicating temperature. Metals shall adhere to physical requirements such as maximum sensitivity range,...

ASTM D8114-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856 kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM D8226-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856?kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM B223-08(2024) - Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
November 1, 2024 - ASTM International

This test method covers the determination of the modulus of elasticity of thermostat metals within a particular temperature range. The test is done by mounting the specimen as a cantilever and measuring its deflection when subjected to a mechanical load. Each test specimen should be finished...

ASTM F3734-24 - Standard Test Method for Performance of Commercial Range Ovens
November 1, 2024 - ASTM International

5.1 Thermostat Calibration-This test is conducted to ensure that all test results are determined at the same bulk oven cavity air temperature. 5.1.1 The results of the following tests can be used by an operator to select a range oven based on its energy consumption performance or its cooking...

ASTM F3689-24 - Standard Test Method for Performance of Compartmentalized Heated Bin Cabinets
September 1, 2024 - ASTM International

5.1 The energy input rate and thermostat calibration tests are used to confirm that the compartmentalized heated bin cabinet is operating properly prior to further testing. 5.2 Preheat energy and time can be useful to food service operators to manage energy demands and to know how quickly...

ASTM F2861-24 - Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
September 1, 2024 - ASTM International

5.1 The energy input rate test and thermostat calibration are used to confirm that the combination oven is operating properly prior to further testing and to ensure that all test results are determined at the same temperature. 5.2 Preheat energy and time can be useful to food service...

ASTM B478-23 - Standard Test Method for Cross Curvature of Thermostat Metals
November 1, 2023 - ASTM International

1.1 This test method covers the determination of cross curvature of thermostat metals. Note 1: This test method is not limited to thermostat metals, and may be used for other materials for which the cross curvature must be measured accurately. Note 2: This standard includes means for...

ASTM F2140-24 - Standard Test Method for Performance of Hot Food Holding Cabinets
September 1, 2024 - ASTM International

5.1 The energy input rate and thermostat calibration tests are used to confirm that the hot food holding cabinet is operating properly prior to further testing. 5.2 Preheat energy and time can be useful to food service operators to manage energy demands and to know how quickly the hot food...

UL 842A - Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
May 31, 2024 - ULSE

1.1 These requirements cover valves that are intended to be used for the control of fluids and their vapors for the fluids indicated in 2. They are of the type commonly used in piping systems and in the assembly of motor fuel dispensing equipment. Valves covered by this standard are for use with...

UL 842B - Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
May 31, 2024 - ULSE

1.1 These requirements cover valves that are intended to be used for the control of fluids and their vapors for the fluids indicated in 2. They are of the type commonly used in piping systems and in the assembly of motor fuel dispensing equipment. Valves covered by this standard are for use with...

ULC 842A - Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)
May 31, 2024 - ULSE

1.1 These requirements cover valves that are intended to be used for the control of fluids and their vapors for the fluids indicated in 2. They are of the type commonly used in piping systems and in the assembly of motor fuel dispensing equipment. Valves covered by this standard are for use with...

ULC 842B - Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil
May 31, 2024 - ULSE

1.1 These requirements cover valves that are intended to be used for the control of fluids and their vapors for the fluids indicated in 2. They are of the type commonly used in piping systems and in the assembly of motor fuel dispensing equipment. Valves covered by this standard are for use with...

Advertisement