loading
TI EUROPEAN LAW - EUROPEAN LAW
TI/UK
A description is not available for this item.
EUROPEAN LAW - EUROPEAN LAW
TI/UK
A description is not available for this item.
SEMI MATERIALS - MATERIALS
SEMI
A description is not available for this item.
ASTM D2838-18(2026) - Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
April 1, 2026 - ASTM International

5.1 As a result of the manufacturing process, internal stresses are locked into the film and these can be released by heating. Note 3: For any given type of film or sheeting, the temperatures at which shrinkage will begin are related to processing techniques employed to manufacture...

ASTM D882-26 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting
April 1, 2026 - ASTM International

1.1 This test method covers the determination of tensile properties of plastics in the form of thin sheeting and films (less than 1.0 mm (0.04 in.) in thickness). Note 1: Film is defined in Terminology D883 as an optional term for sheeting having a nominal thickness no greater...

ASTM E192-20(2026) - Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications
July 1, 2026 - ASTM International

1.1 The reference radiographs provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in thin-wall steel investment castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct reference...

ASTM D7496-18(2026) - Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
May 1, 2026 - ASTM International

3.1 Viscosity has significance in the use of emulsified asphalts because it is a property which affects their utility. When used in application types of construction, the material must be thin enough to be uniformly applied through the spray bar of distributor, yet thick enough so...

ASTM D8668-26 - Standard Test Method for Determining the Peak Stress Energy and Shear Fatigue Resistance of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Monotonic Shear Strength (MOSS) Test
May 1, 2026 - ASTM International

1.1 This test method covers the determination of asphalt binder peak stress (tf), peak stress energy (Ef), and peak strain (?f) using the monotonic shear strength (MOSS) test. tf, Ef, and ?f can be used to measure the strength, toughness, and strain tolerance of an asphalt binder under constant...

ASTM D8380-21(2026) - Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings
February 1, 2026 - ASTM International

5.1 The test method is to be used to determine the abrasion resistance or mechanical durability of thin omniphobic or thin hydrophobic coatings. These coatings are often used to enhance the surface's value by promoting fingerprint resistance, water removal, stain resistance, and...

ASTM D1708-26 - Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
April 1, 2026 - ASTM International

4.1 This test method provides data for quality control and acceptance or rejection under specifications. 4.2 Before proceeding with this test method, reference the ASTM specification of the material being tested. Any test specimen preparation, conditioning, dimensions, or testing parameters,...

ASTM D3801-26 - Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
April 1, 2026 - ASTM International

5.1 The tests results represent afterflame and afterglow time in seconds for a material of specified shape, under the conditions of this test method. 5.2 The effect of material thickness, color additives, and possible loss of volatile components is measurable. 5.3 The results, when...

ASTM D1754/D1754M-20(2025) - Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
November 1, 2025 - ASTM International

1.1 This test method covers the determination of the effects of heat and air on a film of semisolid asphaltic materials. The effects of this treatment are determined from measurements of selected asphalt properties before and after the test. 1.2 The values stated in either SI units or...

ASTM D1754/D1754M-20(2025)e1 - Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
November 1, 2025 - ASTM International

1.1 This test method covers the determination of the effects of heat and air on a film of semisolid asphaltic materials. The effects of this treatment are determined from measurements of selected asphalt properties before and after the test. 1.2 The values stated in either SI units or...

ASTM B808-10(2026) - Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
February 1, 2026 - ASTM International

1.1 This test method monitors the reactivity of a gaseous test environment in which metal surfaces (for example, electrical contacts, assembled printed wiring boards, and so forth) and other materials subject to pollutant gas attack undergo accelerated atmospheric corrosion testing. This...

ASTM B808-10(2026)e1 - Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
February 1, 2026 - ASTM International

1.1 This test method monitors the reactivity of a gaseous test environment in which metal surfaces (for example, electrical contacts, assembled printed wiring boards, and so forth) and other materials subject to pollutant gas attack undergo accelerated atmospheric corrosion testing. This...

ASTM E2698-26 - Standard Practice for Radiographic Examination Using Digital Detector Arrays
February 1, 2026 - ASTM International

1.1 This practice covers the minimum requirements for radiographic examination of metallic and nonmetallic materials using digital detector arrays (DDAs). 1.2 The stated requirements of this specification are based on the use of an X-ray generating source. Additionally, some of the tests and...

ASTM D6343-14(2025) - Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
September 1, 2025 - ASTM International

1.1 This standard is a compilation of test methods for evaluating properties of thermally conductive electrical insulation sheet materials to be used for dielectric applications. 1.2 Such materials are thin, compliant sheets, typically produced by mixing thermally conductive...

ASTM D5083-26 - Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
January 1, 2026 - ASTM International

1.1 This test method covers the determination of the tensile properties of thermosetting reinforced plastics using test specimens of uniform nominal width when tested under defined conditions of pretreatment, temperature, humidity, and testing-machine speed. Note 1: Experience with this test method...

Advertisement