loading
ISA REAL-TIME EXECUT - Real-Time Execution for IEC 61499
January 1, 2009 - ISA

Introduction Today's fast-changing global markets and decreasing product lifecycles are forcing a philosophical shift in manufacturing industries. The approach to manufacturing is quickly moving away from pure mass production to mass customization. In order to rise to the challenge of these...

AIHA FIRST-TIME - THE FIRST-TIME MANAGER
AIHA
A description is not available for this item.
IEEE REAL-TIME SYSTEMS - REAL-TIME SYSTEMS DESIGN AND ANALYSIS
IEEE
A description is not available for this item.
IEEE DISCRETE-TIME - DISCRETE-TIME PROCESSING OF SPEECH SIGNALS
IEEE
A description is not available for this item.
ASTM D5909-20(2026) - Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
June 1, 2026 - ASTM International

1.1 This test method covers the procedure for determining the drying time of oxidative-drying printing inks (also referred to as "sheetfed inks") by squalene resistance of printed ink films. 1.2 This test method is applicable to all paste inks that dry primarily by oxidation regardless of...

ASTM D2847-22(2026) - Standard Practice for Testing Engine Coolants in Car and Light Truck Service
August 1, 2026 - ASTM International

1.1 This practice covers an updated procedure for evaluating corrosion protection and performance of an engine coolant in passenger car, light truck service that closely imitates current vehicle and engine manufacturers' practices. Note 1: Coolant evaluation in vehicle service may require...

ASTM E1354-26 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
August 1, 2026 - ASTM International

5.1 This test method is used primarily to determine the heat evolved in, or contributed to, a fire involving products of the test material. Also included is a determination of the effective heat of combustion, mass loss rate, the time to sustained flaming, and smoke production. These...

ASTM D6794-26 - Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6?h) Heating Time
June 1, 2026 - ASTM International

5.1 It is normal for some of the combustion products of an internal combustion engine to penetrate into the engine lubricant and be retained in it. 5.2 When an engine is run for a period of time and then stored over a long period of time, the by-products of combustion might be...

ASTM D6795-26 - Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30?min) Heating Time
June 1, 2026 - ASTM International

5.1 It is normal for some of the combustion products of an internal combustion engine to penetrate into the engine lubricant and be retained in it. 5.2 When an engine is run for a period of time and then stored over a long period of time, the by-products of combustion might be...

ASTM E1877-21(2026) - Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
July 1, 2026 - ASTM International

5.1 Thermogravimetry provides a rapid method for the determination of the temperature-decomposition profile of a material. 5.2 This practice is useful for quality control, specification acceptance, and research. 5.3 This practice is intended to provide an accelerated thermal endurance estimation in...

ASTM D6780/D6780M-26 - Standard Test Methods for Water Content and Dry Density of Soil In situ by Time Domain Reflectometry (TDR)
June 1, 2026 - ASTM International

1.1 These test methods may be used to determine the water content of soils and the dry density of soils in place using Time Domain Reflectometry. 1.2 These test methods apply to soils that have 30?% or less by weight of their particles retained on the 19.0-mm [3/4-in.] sieve. 1.3 These test...

ASTM D5405/D5405M-98(2026) - Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
May 1, 2026 - ASTM International

5.1 An important factor affecting the performance of joints of nonbituminous membranes is their ability to remain bonded over the membrane's expected service life. Time-to-failure tests provide a means of characterizing the behavior of joints under constant load over time. 5.2 Creep...

ASTM D7997-21(2026) - Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
July 1, 2026 - ASTM International

5.1 General Utility: 5.1.1 This practice is suitable for research, quality control, specification testing and process control. 5.1.2 It is useful to define and verify the reactivity of non-foam polyurethane formulations. 5.2 Limitations: 5.2.1 Operator-to-operator variability and lab-to-lab...

ASTM E2930-26 - Standard Practice for Pressure Decay Leak Test Method
July 1, 2026 - ASTM International

1.1 This practice covers a method for determining the leakage rate of a vessel subject to a positive pressure difference. The technique is based upon evaluation of the change of mass within the test object based on a pressure decay measurement. The pressure decay measurement uses the ideal gas...

ASTM D6383/D6383M-99(2026) - Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
May 1, 2026 - ASTM International

5.1 An important factor affecting the performance of seams of EPDM membranes is their ability to remain bonded over the membrane's expected service life. Time-to-failure tests provide a means of characterizing the behavior of joints under constant load over time. Note 1: Table 1 is...

ASTM D4576-16(2026) - Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
July 1, 2026 - ASTM International

4.1 This test method provides a technique for evaluating mold growth resistance characteristics of Wet Blue and Wet White, and should assist in the prediction of storage time before molding occurs. 4.2 The degree of correlation between this test and commercial quantities of Wet Blue and Wet...

ASTM E2024/E2024M-11(2026)e1 - Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
July 1, 2026 - ASTM International

5.1 These test methods are useful for locating and estimating the size of pressurized gas leaks, either as quality control tests or as field inspection procedures. Also, they are valuable as pretests before other more time consuming and more sensitive leak tests are employed. These test...

Advertisement