loading
GM TOOLKIT - GM TOOLKIT
GMNA
A description is not available for this item.
RTCA DO-229 TOOL - DO-229E Tool - GEO Bias Tool for DO-229E
December 15, 2016 - RTCA

The GEO Bias tool is a MATLAB script. The GEO Bias tool is intended to be used by the manufacturer to demonstrate that their GNSS receiver is compliant with the GEO Bias requirements in DO-229E as described in section 2.1.4.1.5. Appendix T in DO-229E provides a description of this...

ASTM D1492-26 - Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
July 1, 2026 - ASTM International

5.1 This test method is useful as an internal quality control tool, and for use in development or research work on industrial aromatic hydrocarbons and related materials. This test method gives a broad indication of olefinic content. It will not differentiate between the types of aliphatic...

ASTM D7884-26 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
July 1, 2026 - ASTM International

4.1 The presence of 4-CBA and p-TOL in PTA used for the production of polyester is undesirable because they can affect the PET quality (such as contribute to fiber breaks), the polymerization process, and 4-CBA imparts coloration to the polymer due to thermal instability. 4.2 Determining the amount...

ASTM D6299-26a - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
July 1, 2026 - ASTM International

1.1 This practice covers information for the design and operation of a program to monitor and control ongoing stability and precision and bias performance of selected analytical measurement systems using a collection of generally accepted statistical quality control (SQC) procedures and...

ASTM D8681-26 - Standard Test Method for Analysis of Methanol by Gas Chromatography (External Standard)
July 1, 2026 - ASTM International

5.1 Determination of impurity contents in methanol product is often required. This test method is suitable for setting specifications and for use as an internal quality control tool where these products are produced or are used in a manufacturing process. Typical impurities derived from...

ASTM D7139-20(2026) - Standard Terminology for Cotton Fibers
July 1, 2026 - ASTM International

1.1 This standard is the compilation of all terminology developed by Subcommittee D13.11 on Cotton Fibers. 1.2 This terminology is unique to the Cotton Fibers industry. Meanings of the same terms used outside the industry can be found in other compilations or in dictionaries of general usage. 1.3...

ASTM D8675-26 - Standard Guide for Continuous Improvement for Cannabis and Hemp Operations
June 1, 2026 - ASTM International

5.1 Significance of this Guide: 5.1.1 Continuous improvement (CI) is a fundamental element of an operation's quality management efforts. When CI is practiced daily from the top down through the organization, the other elements of quality management fall into place. 5.1.2 CI principles are not only...

ASTM D7611/D7611M-26 - Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
July 1, 2026 - ASTM International

4.1 Resin Identification Codes are used solely to identify the plastic resin used in a manufactured article. The intended manufactured articles include, but are not limited to, packaging. 4.1.1 Fig. 1 and Table 1 present the appropriate information on the way the RIC is to be incorporated onto the...

ASTM D8671-26 - Standard Guide for Determination of Silica and Alumina Molar Ratio in Zeolites by Inductively Coupled Plasma Optical Emission Spectroscopy
June 1, 2026 - ASTM International

5.1 Zeolite composition with reference to silica and alumina is an important indicator of zeolite performance and is a valuable tool for assessing parameters in various industrial zeolite based catalyst processes. 5.2 This guide will be useful to zeolite manufacturers and end users...

ASTM F2716-08(2026) - Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
June 1, 2026 - ASTM International

3.1 This practice may be used to evaluate Classification F104 gasket materials using saturated steam and standard ASME RF (raised face) flanges. This practice is intended for use as quality control or material comparison tool and should not be used to predict performance.

ASTM C1895-26 - Standard Test Method for Determination of Mohs Scratch Hardness
June 1, 2026 - ASTM International

2.1 Mohs scratch hardness is a useful tool for determining a hard surface's resistance to scratching. The resistance to scratching is determined based on a visual observation of the surface after an attempt to scratch the surface using a pick of known hardness.

ASTM E2905/E2905M-26 - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
July 1, 2026 - ASTM International

5.1 Visual interpretation of gear teeth condition, such as contact patterns, scuffing, and wear, differs from examination for surface-breaking cracks or early signs of macro-pitting. Guidance for visual interpretation of gear tooth condition is provided in ASNI/AGMA 1010-F14. 5.2 Eddy current array...

ASTM D1601-18(2026) - Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
July 1, 2026 - ASTM International

4.1 The knowledge of dilute solution viscosity serves as an additional tool in characterizing ethylene polymers. Viscosity data alone is potentially a limited value in predicting the processing behavior of the polymer. However, when used in conjunction with other flow and physical property...

ASTM E1732-26 - Standard Terminology Relating to Forensic Science
July 1, 2026 - ASTM International

1.1 This terminology is the compilation of all terms used by Committee E30 on Forensic Sciences. 1.1.1 This terminology consists mostly of definitions that are specific to forensic science and forensic practice. Meanings of the same terms used outside of forensic practice can be found in other...

ASTM E3022-26a - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
July 1, 2026 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219, E1417/E1417M, and...

ASTM D2699-26 - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
July 1, 2026 - ASTM International

1.1 This laboratory test method covers the quantitative determination of the knock rating of liquid spark-ignition engine fuel in terms of Research O.N., including fuels that contain up to 25?% v/v of ethanol. However, this test method may not be applicable to fuel and fuel components that are...

ASTM D2700-26b - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
July 1, 2026 - ASTM International

1.1 This laboratory test method covers the quantitative determination of the knock rating of liquid spark-ignition engine fuel in terms of Motor octane number, including fuels that contain up to 25?% v/v of ethanol. However, this test method may not be applicable to fuel and fuel components that...

ASTM D6110-26 - Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
July 1, 2026 - ASTM International

1.1 This test method is used to determine the resistance of plastics to breakage by flexural shock as indicated by the energy extracted from standardized (see Note 1) pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. This test method...

ASTM D7244-20(2026) - Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
June 1, 2026 - ASTM International

5.1 This test method is used as a manufacturing or laboratory process control tool by providing a visual comparison of the ability to resist solvent break-through against an established control. The test method is designed to indicate a potential problem caused by an undercured condition but...

Advertisement