1.1 This guide provides guidance on implementing and inculcating continuous improvement practices in cannabis- or hemp-related operations. Continuous Improvement (CI) is one of the 17 quality system elements covered in Guide D8222 and Practice D8556. 1.2 Laws and regulations issued by...
5.1 Visual interpretation of gear teeth condition, such as contact patterns, scuffing, and wear, differs from examination for surface-breaking cracks or early signs of macro-pitting. Guidance for visual interpretation of gear tooth condition is provided in ASNI/AGMA 1010-F14. 5.2 Eddy current array...
5.1 Photovoltaic modules and components must be resistant to prolonged exposure to solar radiation, moisture, and heat. Degradation of polymeric components, delamination at the encapsulant and other interfaces, and moisture ingress are among the degradation modes known to decrease the output of...
5.1 This test method may be used for material development, characterization, design data generation, and quality control purposes. 5.2 This test method is specifically appropriate for determining the modulus of advanced ceramics that are elastic, homogeneous, and isotropic (1). 5.3 This test method...
5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...
1.1 This guide pertains to removal and analysis techniques to extract debris captured by in-service lubricant and hydraulic filters and to analyze the debris removed. 1.2 This guide suggests techniques to remove, collect and analyze debris from filters in support of machinery health...
5.1 Pipe and duct insulation systems are often evaluated with Test Method E84 to comply with building or mechanical code requirements. This practice describes, in detail, specimen preparation and mounting procedures for single-component pipe or duct insulation systems and for...
1.1 In this guide, organizations are provided with a systematic approach to identify, prioritize, reduce, and control workplace risks specific to serious incidents and fatalities (SIF). A structured framework is given for identifying hazards, assessing risk levels, and implementing controls based...
5.1 This guide is intended for the developers or sponsors of new aviation gasolines or additives to describe the data requirements necessary to support the development of specifications for these new products by ASTM members. The ultimate goal of the data generated in accordance with this...
1.1 This guide helps describe the laboratory informatics landscape and covers issues commonly encountered at all stages in the life cycle of laboratory informatics from inception to retirement. It explains the evolution of laboratory informatics tools used in today's laboratories such as...
1.1 This guide covers information on selection of insulation materials, systems design, application methods, protective coverings, guarantees, inspection, testing, and maintenance of thermal insulation primarily for industrial applications in a temperature range of -320 to 1200°F (-195.5 to...
3.1 This specification provides designers and manufacturers of electric propulsion for light sport aircraft design references and criteria to use in designing and manufacturing EPUs. 3.2 Declaration of compliance is based on testing and documentation during the design, ground testing and flight...
1.1 This standard provides guidance for circular product design (CPD; also known as "design for circularity") through the introduction of general principles that extend the usability of products and their components, support material recovery at the end-of-use (EoU), and minimize resource...
1.1 In this guide, analysis methods are provided supporting the redistribution of aircraft functions between a human pilot and aircraft systems. Note 1: The analysis methods presented in this guide do not represent a means or method of compliance to any specific regulation. In this...
Narrow Your Results