loading
IFI TORQUE TENSIONING - TORQUE BOOK FOR FASTENERS
IFI/FASTNR
A description is not available for this item.
ASTM F2961-26 - Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
April 1, 2026 - ASTM International

1.1 This test method is used for evaluating how gloves affect an individual wearer's ability to grip onto a hard surface object. 1.1.1 This test method establishes procedures for measuring the maximum torque that can be attained by an individual's bare hand as compared to the maximum...

ASTM F2388-21(2026) - Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
July 1, 2026 - ASTM International

This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing tables and other changing surfaces such as contoured changing pads and add-on changing units that are sold separately for use on furniture products...

ASTM D1646-19a(2026) - Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
April 1, 2026 - ASTM International

1.1 These test methods cover procedures for measuring a property called Mooney viscosity. Mooney viscosity is defined as the shearing torque resisting rotation of a cylindrical metal disk (or rotor) embedded in rubber within a cylindrical cavity. The dimensions of the shearing disk...

ASTM F3832-26 - Standard Specification for Rotors and Rotor Systems for Light Sport Helicopters
May 1, 2026 - ASTM International

1.1 This specification covers the performance, safety, and marking requirements for main lift rotors and anti-torque systems, including rotor speed limits, drive system design, warning systems, operational limitations, and documentation requirements. 1.2 Units-The values given in this...

ASTM F912-26 - Standard Specification for Alloy Steel Socket Set Screws
May 1, 2026 - ASTM International

This specification covers the requirements and corresponding test methods for quenched and tempered alloy steel socket set screws (SSS) having sizes of M1.6 through M24, hardnesses of 45 to 53 HRC, and belonging to ISO 898/5 property class 45H. These set screws are intended for compression...

ASTM E2624-17(2025) - Standard Practice for Torque Calibration of Testing Machines
October 1, 2025 - ASTM International

1.1 This practice covers procedures and requirements for the calibration of torque for static and quasi-static torque capable testing machines. These may, or may not, have torque indicating systems and include those devices used for the calibration of hand torque tools....

ASTM F2213-25 - Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
December 1, 2025 - ASTM International

1.1 This test method covers the measurement of the magnetically induced torque produced by the static magnetic field in the magnetic resonance environment on medical devices and the comparison of that torque to a user-specified acceptance criterion. 1.2 This test method does not...

ASTM D5289-19a(2026) - Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
April 1, 2026 - ASTM International

5.1 This test method is used to determine the vulcanization characteristics of (vulcanizable) rubber compounds. 5.2 This test method may be used for quality control in rubber manufacturing processes, for research and development testing of raw-rubber compounded in an evaluation formulation, and for...

ASTM D8288-25 - Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine
November 1, 2025 - ASTM International

1.1 This test method describes a laboratory technique to evaluate the mean lubricant efficiency of metal removal fluids using an instrumented tapping machine that measures and records torque. 1.1.1 The method is applicable to all tap types, machining speeds, and alloys that can be fabricated...

ASTM F855-26 - Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
March 1, 2026 - ASTM International

These specifications cover the equipment making up the temporary grounding system used on de-energized electric power lines, electric supply stations, and equipment. These specifications for a system of protective grounding utilizing copper cables are covered in four parts, as follows: clamps,...

ASTM F1505-16(2026) - Standard Specification for Insulated and Insulating Hand Tools
March 1, 2026 - ASTM International

This specification covers the testing and corresponding design and performance requirements for insulated and insulating hand tools used for working on, or in close proximity to, energized electrical apparatus or conductors operating at maximum voltage of 1000 V ac or 1500 V dc. The hand tools...

ASTM F3756-26 - Standard Practice for Grasp-Type Robot End-Effectors: Split Force Measurement Apparatus
February 1, 2026 - ASTM International

5.1 To design relevant performance metrics and methods for characterizing grasp-type end-effectors, this practice helps to understand the contextual or application-specific issues surrounding robotic grasping and manipulation. Characterization of an end-effector should not be thought of in terms of...

ASTM F1169-25 - Standard Consumer Safety Specification for Full-Size Baby Cribs
December 15, 2025 - ASTM International

This consumer safety specification establishes the performance requirements and test procedures to determine the structural integrity, design requirements addressing entanglement on corner post extensions, and requirements for warning labels and instructional material for full-size baby cribs....

ASTM F2961-25 - Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
August 1, 2025 - ASTM International

1.1 This test method is used for evaluating how gloves affect an individual wearer's ability to grip onto a hard surface object. 1.1.1 This test method establishes procedures for measuring the maximum torque that can be attained by an individual's bare hand as compared to the maximum...

ASTM D2538-25 - Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
July 1, 2025 - ASTM International

5.1 When PVC compounds are mixed under appropriate conditions of heat and shear, a fused mass is produced. This mass has certain melt characteristics which can be defined with a torque rheometer operated under fixed conditions of shear and temperature. The fusion characteristics of a PVC...

ASTM F1235-25 - Standard Consumer Safety Specification for Portable Hook-On Chairs
November 15, 2025 - ASTM International

This consumer safety specification covers the performance requirements and test methods designed to ensure the satisfactory performance, and hence, minimize injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of portable hook-on chairs. Chairs that conform to...

ASTM D6821-25 - Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
November 1, 2025 - ASTM International

5.1 Viscosity of drive line lubricants at low temperature is critical for both gear lubrication and the circulation of the fluid in automatic transmissions. For gear oils (GOs), the issue is whether the fluid characteristics are such that the oil will flow into the channel dug out by the submerged...

ASTM F3773-25 - Standard Test Method for Assessing the Effect of Back Exoskeletons on Low Back Loading and Risk
November 1, 2025 - ASTM International

1.1 Purpose: 1.1.1 The purpose of this test method is to quantitatively assess how much a back exoskeleton affects low back loading (musculoskeletal forces in the lumbar region of the back) and low back disorder (LBD) risk. LBDs refer to a broad range of medical conditions, injuries, or issues of...

ASTM F855-25 - Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
September 1, 2025 - ASTM International

These specifications cover the equipment making up the temporary grounding system used on de-energized electric power lines, electric supply stations, and equipment. These specifications for a system of protective grounding utilizing copper cables are covered in four parts, as follows: clamps,...

Advertisement