loading
ANSI CONSTRUCTION - ANSI CONSTRUCTION
IHS
A description is not available for this item.
ASTM D8655-26 - Standard Classification System for Cell Classification of Pre- and Post-Consumer Recycled Rigid Poly(Vinyl Chloride)(PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Materials
April 15, 2026 - ASTM International

1.1 This classification covers rigid Poly(Vinyl Chloride)(PVC), Chlorinated Poly(Vinyl Chloride)(CPVC), copolymers, blends and alloys, and composite materials derived from recyclate from extruded, molded or calendared forms or operations and composed of polyvinyl chloride, chlorinated polyvinyl...

ASTM E2356-26 - Standard Practice for Comprehensive Building Asbestos Surveys
February 1, 2026 - ASTM International

1.1 This practice describes procedures for conducting comprehensive surveys of buildings and facilities for the purpose of locating, identifying, quantifying, and assessing asbestos-containing materials. 1.2 The results of a comprehensive building asbestos survey are intended to be used for ongoing...

SAA AS 1559 - FASTENERS-BOLTS, NUTS AND WASHERS FOR TOWER CONSTRUCTION
SAI
A description is not available for this item.
JIS CONSTRUCTION I-2 HDBK - JIS Construction I-2 Handbook
January 1, 2020 - JSA
A description is not available for this item.
JIS CONSTRUCTION I-1 HDBK - JIS Construction I-1 Handbook
January 1, 2020 - JSA
A description is not available for this item.
JIS CONSTRUCTION II HDBK - JIS Construction II Handbook
January 1, 2020 - JSA
A description is not available for this item.
ASTM D8125-24 - Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
June 1, 2024 - ASTM International

This specification establishes the material, manufacturing, and physical requirements for re-refined engine oil bottoms, also known as vacuum tower asphalt extender, that may be used in formulating asphalt for pavement construction and roofing. "Re-refined engine oil bottoms" (REOB)...

TIA/ASSE COMM TOWER SET - Loading, Analysis, Design Criteria, and Safety Practices for the Construction, Demolition, Alteration and Maintenance of Communication Structures
August 22, 2016 - TIA

This set contains: TIA-322 The scope of this Standard is limited to providingengineering criteria to evaluate strength and stability requirements related tothe installation, alteration and maintenance of communication structures, basedon construction loads as defined in a rigging plan...

ASTM A394-08(2024) - Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
January 1, 2024 - ASTM International

This specification covers the chemical and mechanical requirements of hexagon and square-head zinc-coated steel bolts and atmospheric corrosion-resistant bolts for use in the construction of transmission towers, substations, and similar steel structures. The following types of bolts...

JIS CONSTRUCTION I HDBK - JIS Machine Construction I Handbook
January 1, 2018 - JSA
A description is not available for this item.
ASTM D8125-18(2023) - Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
June 1, 2023 - ASTM International

This specification establishes the material, manufacturing, and physical requirements for re-refined engine oil bottoms, also known as vacuum tower asphalt extender, that may be used in formulating asphalt for pavement construction and roofing. "Re-refined engine oil bottoms" (REOB)...

CTI CHAPTER 9 - MATERIALS OF CONSTRUCTION FOR COOLING TOWERS
May 1, 2017 - CTI

The materials of construction for a cooling tower are of primary importance and should be given the most detailed attention. The average process cooling tower is operated to some degree on a year round basis and is, therefore, alternately exposed to hot, warm, and cold air and...

ASTM E2461-22 - Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
December 15, 2022 - ASTM International

1.1 This practice covers the determination of the thickness of glass installed in airport traffic control towers (ATCT) to resist a specified design loading with a selected probability of breakage less than or equal to either 1 lite per 1000 or 4 lites per 1000 at the first occurrence of the...

ASTM A1085/A1085M-22 - Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
November 1, 2022 - ASTM International

This specification covers cold-formed welded carbon steel hollow structural sections (HSS) for welded or bolted construction that are used in, although not limited to, buildings, bridges, towers, cranes, sign supports and poles, off-shore production and drilling platforms, roll-over...

ASTM E2076/E2076M-15(2022) - Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
December 1, 2022 - ASTM International

1.1 This practice provides guidelines for acoustic emission (AE) examinations of fiberglass reinforced plastic (FRP) fan blades of the type used in industrial cooling towers and heat exchangers. 1.2 This practice uses simulated service loading to determine structural integrity. 1.3 This...

ASME B30.3 - Tower Cranes
August 19, 2020 - ASME

The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement-related equipment. For the convenience of the reader, the Standard has been divided into separate...

Advertisement