loading
PCMCIA SYSTEM - PCMCIA SYSTEM ARCHITECTURE
PCMCIA
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP SI - 2020 ASHRAE Handbook HVAC Systems and Equipment SI Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASHRAE SYSTEMS & EQUIP IP - 2020 ASHRAE Handbook HVAC Systems and Equipment I-P Edition
January 1, 2020 - ASHRAE
A description is not available for this item.
ASTM F1041-26 - Standard Guide for Squeeze-Off of Polyethylene Gas Pressure Pipe and Tubing
April 1, 2026 - ASTM International

3.1 Squeeze-off is a technique used to control the flow of gas through a pipe by the compressing action of a mechanical or hydraulic device. Squeeze-off may be used to reduce the flow of gas to an acceptable rate. 3.2 Proper squeeze-off procedures result in significant time...

TRADE EXPERT - MONTH - IHS IMPORT REGULATIONS - MONTHLY
IHS
A description is not available for this item.
TRADE EXPERT - QUARTER - IHS IMPORT REGULATIONS - QUARTERLY
IHS
A description is not available for this item.
TIA OFFICE BUILDING SET - TIA OFFICE BUILDING STRUCTURED CABLING SET OF 6 TIA TR-42 STANDARDS. *** YOU SAVE 25% WHEN PURCHASING AS A SET ***
TIA

This focused set of TIA Standards enables the planning and installation of a structured data/phone cabling system for office-oriented networks. Supporting Standards for pathways & spaces, administration, bonding & grounding, and building automation systems are included. These...

OFFICIAL DICTIONARY OF - OFFICIAL DICTIONARY OF MILITARY TERMS
IHS
A description is not available for this item.
EIA TRADE DIRECTORY M - EIA TRADE DIRECTORY & MEMBERSHIP LIST
EIA
A description is not available for this item.
ASTM F3125/F3125M-26 - Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi, 144 ksi, and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
July 1, 2026 - ASTM International

1.1 This specification covers chemical, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and alloy steel, in inch and metric dimensions, in two strength grades, two types and two styles. 1.1.1 This specification was originally issued as a consolidation...

ASTM C1857/C1857M-26 - Standard Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar
June 1, 2026 - ASTM International

1.1 This test method is suitable for laboratory use to determine one or more of the following: 1.1.1 The bond strength of a repair or an overlay material to a specific concrete substrate. 1.1.2 The tensile strength of a repair or overlay material after the material has been applied to the concrete...

ASTM D7881-26 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
July 1, 2026 - ASTM International

1.1 This test method covers the determination of 4-carboxybenzaldehyde (4-CBA) and p-toluic acid (p-TOL) in purified terephthalic acid (PTA). 1.2 This test method is applicable to samples with 4-CBA from 3?mg/kg to 400?mg/kg and for p-TOL from 8?mg/kg to 400?mg/kg, respectively. 1.3 The following...

ASTM D7882-26 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
July 1, 2026 - ASTM International

1.1 This test method covers the determination of 4-carboxybenzaldehyde (4-CBA) and p-toluic acid (p-TOL) in purified terephthalic acid (PTA). 1.2 This test method is applicable for 4-CBA from 5?mg/kg to 400?mg/kg and for p-TOL from 10?mg/kg to 400?mg/kg, respectively. 1.3 The following applies for...

ASTM F3174/F3174M-26 - Standard Specification for Establishing Operating Limitations and Information for Aeroplanes
May 1, 2026 - ASTM International

This specification prescribes airworthiness design requirements for the establishment of operating limitations and information for the operation of aeroplanes. It addresses the general limitations and information to be contained in the aeroplane flight manual. The applicant for a design...

ASTM F3825-26 - Standard Specification for Operating Limitations, Markings, Placards, and Warnings for Light Sport Aircraft
May 1, 2026 - ASTM International

1.1 This specification covers the requirement for operating limitations, markings, placards, and warnings for light sport aircraft. This includes those items necessary for safe operation and occupant warnings. It also defines the minimum requirements for legibility and consistency of...

Advertisement