loading
ASTM D4956-26 - Standard Specification for Retroreflective Sheeting for Traffic Control
July 1, 2026 - ASTM International

1.1 This specification covers flexible, non-exposed glass-bead lens and microprismatic, retroreflective sheeting designed for use on traffic control signs, delineators, barricades, and other devices. This specification does not address inks, overlays, or other imaging methods that may be...

ASTM C1944/C1944M-26 - Standard Specification for Pedestal-Set Concrete Paving Slabs
June 1, 2026 - ASTM International

1.1 This specification covers the requirements for segmental concrete paving slabs used for construction of pedestal-set applications for commercial and municipal projects. These slabs can be manufactured with a dry-cast, wet-cast, or hydraulically-pressed process or some combination of these...

ASTM F3679-26 - Standard Consumer Safety Specification for Commercial Electric-Powered Scooters for Adults
July 1, 2026 - ASTM International

1.1 This consumer safety specification covers the establishment of performance requirements and corresponding test methods used to minimize the hazards to users of electric-powered scooters for rent or lease by multiple users but not individually owned units. For example, electric-powered scooters...

ASTM D8463/D8463M-26 - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric, Silyl-Terminated Polymer Based Waterproofing Membrane for Use with Separate Wearing Course
June 15, 2026 - ASTM International

1.1 This specification describes the required properties and test methods for a one or two-component, cold liquid-applied elastomeric-type membrane comprised of silyl-terminated polyether polymer, silyl-terminated polyurethane polymer, or a blend of the two polymers for waterproofing building decks...

ASTM D7119/D7119M-21(2026) - Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
May 1, 2026 - ASTM International

4.1 Adequate coating thickness (mil thickness) is necessary to protect polyurethane foam from the effects of ultraviolet degradation. This guide outlines general procedures for sampling and measuring the coating thickness by using slit or core samples. 4.2 Thickness of individual lifts of sprayed...

ASTM C1782/C1782M-26 - Standard Specification for Segmental Concrete Paving Slabs
June 1, 2026 - ASTM International

1.1 This specification covers the requirements for segmental concrete paving slabs manufactured for construction of pedestrian and roof applications for commercial and municipal projects. These slabs can be manufactured with a dry-cast, wet-cast, or hydraulically-pressed process or some combination...

ASTM F3201-26 - Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
May 1, 2026 - ASTM International

1.1 This practice covers software development, validation and verification practices for software that is part of an unmanned aircraft system (UAS), including its associated elements. It may also be used by third-party service providers, including UAS Traffic Management (UTM) service...

ASTM D8265-26 - Standard Practices for Electrical Methods for Mapping Leaks in Installed Geomembranes
April 1, 2026 - ASTM International

4.1 Geomembranes are used as impermeable barriers to prevent liquids from leaking from landfills, ponds, and other containment facilities. The liquids may contain contaminants that, if released, can cause damage to the environment. Leaking liquids can erode the subgrade, causing further damage....

ASTM F3824-26 - Standard Specification for Non-Fatigue Aerial Work for Light Sport Category Aircraft
April 1, 2026 - ASTM International

1.1 This specification covers the requirements for aerial work that apply to all classes of aircraft that meet the requirements for Light Sport Category Aircraft. 1.2 Aerial work included within this specification shall be limited to the following: 1.2.1 Glider towing; 1.2.2 Banner towing; 1.2.3...

ASTM E2832-26 - Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
March 1, 2026 - ASTM International

1.1 This test method covers a measurement of the wet retroreflective (RL-2) properties of horizontal pavement marking materials, such as traffic stripes and road surface symbols. A standardized method utilizing a standardized continuous wetting device and a portable retroreflectometer is...

ASTM D5925-26 - Standard Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems
February 15, 2026 - ASTM International

4.1 This practice should be used in conjunction with a surface and subsurface site investigation to delineate a recommended field area that is adequate for any septic system that can reasonably be anticipated for the site. If actual design results in a smaller field area, the boundaries can be...

ASTM F3463-26 - Standard Guide for Ensuring the Safety of Connected Consumer Products
April 1, 2026 - ASTM International

4.1 This guide is intended to apply in conjunction with applicable end-product specific performance or design standard requirements to address the overall system safety of a connected consumer product. Designers and manufacturers of a connected consumer product, with assistance from conformity...

ASTM F3758-26 - Standard Guide for Exercising a Contextual Framework for Increasingly Autonomous Aviation Systems
February 15, 2026 - ASTM International

5.1 The analysis methods in this guide produce data deliverables that may be used to inform: 5.1.1 Technical familiarization (FAA Order 8110.4C, Section 2-3c)?discussions with the certifying authority by means of providing a standardized contextual framework and vocabulary for addressing...

ASTM D8237-25 - Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
November 1, 2025 - ASTM International

5.1 The laboratory fatigue life determined by this standard for beam specimens has been used to estimate the fatigue life of asphalt mixture pavement layers under repeated traffic loading. Although the field performance of asphalt mixtures is impacted by many factors (traffic...

ASTM C1944/C1944M-25 - Standard Specification for Pedestal-Set Concrete Paving Slabs
December 1, 2025 - ASTM International

1.1 This specification covers the requirements for segmental concrete paving slabs used for construction of pedestal-set applications for commercial and municipal projects. These slabs can be manufactured with a dry-cast, wet-cast, or hydraulically-pressed process or some combination of these...

ASTM D2205-25 - Standard Guide for Selection of Tests for Traffic Paints
June 1, 2025 - ASTM International

This guide covers the selection and use of procedures for testing traffic paints in the laboratory and in the field. This guide covers the testing of a ready-mixed paint product of sprayable consistency that shall be suitable for use as a reflecting traffic guide on paved roadways....

ASTM D8518-25 - Standard Guide for Application of Hot-Applied Rubberized Asphalt Roofing and Waterproofing
December 1, 2025 - ASTM International

4.1 Establishing standard practices and recommended procedures is a critical step required to achieve quality roofing and waterproofing system installations. This guide describes preparing typical substrates to receive hot-applied rubberized asphalt (HRA), melting and application of HRA, typical...

ASTM D8463/D8463M-25 - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric, Silyl-Terminated Polymer Based Waterproofing Membrane for Use with Separate Wearing Course
December 1, 2025 - ASTM International

1.1 This specification describes the required properties and test methods for a one or two-component, cold liquid-applied elastomeric-type membrane comprised of silyl-terminated polyether polymer, silyl-terminated polyurethane polymer, or a blend of the two polymers for waterproofing building decks...

ASTM F3705-25 - Standard Guide for Testing Detect and Avoid Systems for Unmanned Aircraft Systems
December 1, 2025 - ASTM International

1.1 This guide applies to unmanned aircraft (UA) with a maximum dimension (for example, wingspan, disk diameter) =?25?ft (=?7.68 m) operating at airspeeds below 100?kts and of any configuration or category. It is meant to be applied in a "lower risk" (low- and medium-risk airspace as described by...

ASTM C1782/C1782M-25a - Standard Specification for Segmental Concrete Paving Slabs
December 1, 2025 - ASTM International

1.1 This specification covers the requirements for segmental concrete paving slabs manufactured for construction of pedestrian and roof applications for commercial and municipal projects. These slabs can be manufactured with a dry-cast, wet-cast, or hydraulically-pressed process or some combination...

Advertisement